doc(setup):Note how to connect remotely to Syncthing WebUI

diff --git a/doc/setup/README.org b/doc/setup/README.org
index 66bb04e48824fcd2054a4f2f1858bd4aa827cdbe..7c5b63afcebc2be41a11c28b93b17ca3b0d39ac4 100644 (file)
--- a/doc/setup/README.org
+++ b/doc/setup/README.org
@@ -5,7 +5,7 @@
 ** About
 This document created by [[http://baltakatei.com][Steven Baltakatei Sandoval]] on
 ~2020-10-07T18:39Z~ under a [[http://creativecommons.org/licenses/by-sa/4.0/][CC BY-SA 4.0]] license and last updated on
-~2020-10-08T00:38Z~.
+~2020-10-08T00:50Z~.
 
 This document contains information regarding setup of the
 ninfacyzga-01 hardware common to all operation modes. This includes:
@@ -243,6 +243,16 @@ Enable automatic startup. (See [[https://docs.syncthing.net/users/autostart.html
 : $ sudo systemctl enable syncthing@pi.service
 : $ sudo systemctl start syncthing@pi.service
 
+The WebUI of the local instance of syncthing (port 8384) can be
+accessed by running the following command from a separate machine:
+
+: $ ssh -L 127.0.0.1:8390:127.0.0.1:8384 pi@ninfacyzga-1-x
+
+Then, the separate machine should navigate to ~localhost:8390~ in a
+web browser in order to change the ninfacyzga-1 device's
+configuration. The separate machine's Syncthing configuration options
+are accessible via its own web browser via ~localhost:8384~.
+
 ****** ~git~
 ~git~ facilitates downloading files from this repository to the
 device. It may be installed via: