TODO.org

   1 * Task List
   2 ** TODO Add ~photograph~ (?) logging
   3 The Raspberry Pi Zero W has a camera connector that lets certain types
   4 of camera devices connect. The ~raspistill~ command permits capturing
   5 of photographs and outputting the file to stdout. Therefore, it should
   6 be possible to create a script that periodically calls ~raspistill~ to
   7 output ~jpg~ stdout to ~age~ for encryption and addition to a ~tar~
   8 file. An Arducam IMX219 wide angle camera captures an 8 megapixel
   9 image; default settings of ~raspistill~ produces an image of roughly
  10 ~4.5~ to ~5~ megabytes.
  11
  12 Some commands that can be used for creating timelapses via ~ffmpeg~
  13 are:
  14
  15 : ffmpeg -r 60 -f image2 -s 3280x2464 -pattern_type glob -i '*.jpg' -vcodec libx264 -crf 18 "$(date +%Y%m%dT%H%M%S%z)..time_lapse".mp4
  16 : cat *.jpg | ffmpeg -f image2pipe -i - output.mp4  # see https://trac.ffmpeg.org/wiki/Slideshow#Pipe
  17
  18 *** TODO Augment ~bklog~
  19 Also, either the ~bklog~ script needs to be augmented or a new script
  20 written in order to handle the case of handling an image file coming
  21 in via stdin. Currently, ~bklog~ can't properly handle the stdout
  22 produced by a command such as:
  23
  24 : raspistill -o -
  25
  26 Even if a helper script is written that outputs jpg images via stdout,
  27 ~bklog~ currently has no way of knowing how to partition the stream of
  28 stdout into separate files.
  29
  30 Since ~raspistill~ produces a single image and then should be
  31 terminated, it is appropriate to use ~cron~ to call a simple script to
  32 run regularly (ex: every 5 minutes) and to pipe the output to a script
  33 that uses ~age~ to encrypt against a recipient. Code from ~bklog~ can
  34 be reused to do this. It is probably not appropriate to try and
  35 augment ~bklog~ to handle this method of being called since it was
  36 written with the intention of handling continuous streams of stdout.
  37
  38 ** TODO Create automatic setup scripts for logging
  39 Date Created: 2021-01-25T00:21Z
  40
  41 Create bash scripts that automatically set up a ~ninfacyzga-1~ device
  42 to automatically run executables in ~exec/~ according to procedures
  43 described in ~doc/~.
  44
  45 *** TODO Create setup script for location logging
  46 Date Created: 2021-01-25T00:24Z
  47
  48 Setting up location logging script using ~bklog~ via ~cron~ job.
  49
  50 *** TODO Create setup script for time tracking
  51 Date Created: 2021-01-25T00:25Z
  52
  53 Setting up time tracking via ~chrony~.
  54
  55 ** TODO Use ~age --version~ in creating ~VERSION~ output files
  56 ~age~ as of ~beta7~ outputs its version using the ~--version~ option.
  57
  58 * Finished Tasks
  59 ** DONE Remove unused executables
  60    CLOSED: [2021-01-25 Mon 00:07]
  61 Date Created: 2021-01-25T00:03Z
  62
  63 Some unused executables are present in the ~exec/~ directory that are
  64 not used. An example is ~bkgpslog~ which has been superceded by
  65 ~gpspipe | bklog~.
  66
  67 ** DONE ~/doc/time~: Migrate from ~ntpsec~ to ~chrony~
  68    CLOSED: [2020-10-19 Mon 03:48]
  69 The ~ntpsec~ package is in the ~dfsg~ Debian repository instead of the
  70 ~main~ Debian repository. This is likely due to ~ntpsec~ using a mix
  71 of ~ntp~'s original "NTP License", ~BSD 2~, and ~MIT~ licenses.
  72
  73 In contrast, ~chrony~ uses the ~GPLv2~ license which allows it to be
  74 in the Debian main repository.
  75
  76 ~gpsd~ documentation for communicating to ~chrony~ via
  77 ~/run/chrony.XXXX.sock~ and ~/run/chrony.YYYY.sock~ sockets (for GPS
  78 and PPS data respectively) can be found [[https://gpsd.gitlab.io/gpsd/gpsd-time-service-howto.html#_feeding_chrony_from_gpsd][here]].
  79
  80 *** Closing comments (bktei):
  81 ~chrony~ seems much simpler to configure. Its method for interfacing
  82 with ~gpsd~ seems simpler as well. The fact that it displays time
  83 units in its ~chronyc sources~ output means the developers value
  84 communicating clearly the values they provide the user.
  85 ** DONE ~doc/setup~: Disable bluetooth
  86    CLOSED: [2020-10-19 Mon 03:50]
  87 *** Closing comments (bktei):
  88 Bluetooth is disabled via a ~systemctl~ command and modifications to
  89 ~/boot/config.txt~.