fix(exec/temp):Reduce socket calls for hostname

[EVA-2020-02.git] / exec / bkgpslog-plan.org

2020-07-12T21:16Z; bktei> Note: This file is now retired since ~bklog~
has replaced ~bkgpslog~.

* bkgpslog task list
** DONE Add job control for short buffer length
   CLOSED: [2020-07-02 Thu 16:04]
2020-07-02T14:56Z; bktei> File write operations were bundled into a
magicWriteBuffer function that is called then detached from the script
shell (job control), but the detached job is not tracked by the main
script. A problem may arise if two instances of magicWriteBuffer
attempt to write to the same tar simultaneously. Two instances of
magicWriteBuffer may exist if the buffer length is low (ex: 1 second);
the default buffer length of 60 seconds should reduce the probability
of a collision but it should be possible for the main script to track
the process ID of a magicWriteBuffer() as soon as it detaches and then
checking (via ~$!~ as described [[https://bashitout.com/2013/05/18/Ampersands-on-the-command-line.html][here]]) that the process is still alive.
2020-07-02T15:23Z; bktei> I found that the Bash ~wait~ built-in can be
used to delay processing until a specified job completes. The ~wait~
command will pause script execution until all backgrounded processes
complete.
2020-07-02T16:03Z; bktei> Added ~wait~.
** DONE Rewrite tar initialization function
   CLOSED: [2020-07-02 Thu 17:23]
2020-07-02T17:23Z; bktei> Simplify tar initialization function so
VERSION file is used to test appendability of tar as well as to mark
when a new session is started.
** DONE Consolidate tar checking/creation into function
   CLOSED: [2020-07-02 Thu 18:33]
2020-07-02T18:33Z; bktei> Simplify how the output tar file's existence
is checked and its status as a valid tar file is validated. This was
done using a new function ~checkMakeTar~.
** DONE Add VERSION if output tar deleted between writes

   CLOSED: [2020-07-02 Thu 20:22]
2020-07-02T20:21Z; bktei> Added bkgpslog-specified function
magicWriteVersion() to be called whenever a new time-stamped ~VERSION~
file needs to be generated and appended to the output tar file
~PATHOUT_TAR~.
** DONE Rewrite buffer loop to reduce lag between gpspipe runs

   CLOSED: [2020-07-03 Fri 20:57]
2020-07-03T17:10Z; bktei> As is, there is still a 5-6 second lag
between when ~gpspipe~ times out at the end of a buffer round and when
~gpspipe~ is called by the subsequent buffer round. I believe this can
be reduced by moving variable manipulations inside the
asynchronously-executed magicWriteBuffer() function. Ideally, the
while loop should look like:

#+BEGIN_EXAMPLE
while( $SECONDS < $SCRIPT_TTL); do
    gpspipe-r > "$DIR_TMP"/buffer.nmea
    writeBuffer &
done
#+END_EXAMPLE
2020-07-03T20:56Z; bktei> I simplified it futher to something like
this:
#+BEGIN_EXAMPLE
while( $SECONDS < $SCRIPT_TTL); do
    writeBuffer &
    sleep $SCRIPT_TTL
done
#+END_EXAMPLE

Raspberry Pi Zero W shows approximately 71ms of drift per buffer round
with 10s buffer.
** DONE Feature: Recipient watch folder
   CLOSED: [2020-07-12 Sun 21:08]
2020-07-03T21:28Z; bktei> This feature would be to scan the contents
of a specified directory at the start of every buffer round in order
to determine encryption (age) recipients. This would allow a device to
dynamically encrypt location data in response to automated changes
made by other tools. For example, if such a directory were
synchronized via Syncthing and changes to such a directory were
managed by a trusted remote server, then that server could respond to
human requests to secure location data.

Two specific privacy subfeatures come to mind:

1. Parallel encryption: Given a set of ~n~ public keys, encrypt data
   with a single ~age~ command with options causing all ~n~ pubkeys to
   be recipients. In order to decrypt the data, any individual private
   key could be used. No coordination between key owners would be
   required to decrypt.

2. Sequential encryption: Given a set of ~n~ public keys, encrypt data
   with ~n~ sequential ~age~ commands all piped in series with each
   ~age~ command utilizing only one of the ~n~ public keys. In order
   to decrypt the data, all ~n~ private keys would be required to
   decrypt the data. Since coordination is required, it is less
   convenient than parallel encryption.

In either case, a directory would be useful for holding configuration
files specifying how to execute which or combination of which features
at the start of every buffer round.

I don't yet know how to program the rules, although I think it'd be
easier to simply add an option providing ~bkgpslog~ with a directory
to watch. When examining the directory, check for a file with the
appropriate file extension (ex: .pubkey) and then read the first line
into the script's pubKey array.

2020-07-12T21:08Z; bktei> ~-R~ watch directory option added in ~bkgpslog~ ver
~0.4.0~.

** DONE Feature: Simplify option to reduce output size
   CLOSED: [2020-07-12 Sun 21:15]

~gpsbabel~ [[https://www.gpsbabel.org/htmldoc-development/filter_simplify.html][features]] a ~simplify~ option to trim data points from GPS
data. There are several methods for prioritizing which points to keep
and which to trim, although the following seems useful given some
sample data I've recorded in a test run of ninfacyzga-01:

#+BEGIN_EXAMPLE
gpsbabel -i nmea -f all.nmea -x simplify,error=10,relative -o gpx \
-F all-simp-rel-10.gpx
#+END_EXAMPLE

An error level of "10" with the "relative" option seems to retain all
desireable features for GPS data while reducing the number of points
along straightaways. File size is reduced by a factor of
about 11. Noise from local stay-in-place drift isn't removed; a
relative error of about 1000 is required to remove stay-in-place drift
noise but this also trims all but 100m-size features of the recorded
path. A relative error of 1000 reduces file size by a factor of
about 450.

#+BEGIN_EXAMPLE
 67M relerror-0.001.kml
 66M relerror-0.01.kml
 58M relerror-0.1.kml
 21M relerror-1.kml
5.8M relerror-10.kml
797K relerror-100.kml
152K relerror-1000.kml
#+END_EXAMPLE

2020-07-12T21:13Z; bktei> Instead of programming data simplification
in ~bkgpslog~, the data simplification step should be performed via
~bklog~'s ~-p~ option which specifies a processing command string to
be ~eval~'d before data is compressed, encrypted, and written to
disk. In other words, handling the simplification of data beyond
allowing for a general command string specified by ~-p~ is outside the
scope of ~bkgpslog~ or its successor ~bklog~.

** DONE Feature: Generalize bkgpslog to bklog function
   CLOSED: [2020-07-12 Sun 21:11]
2020-07-05T02:42Z; bktei> Transform ~bkgpslog~ into a modular
component called ~bklog~ such that it processes a stdout stream of any
external command, not just ~gpspipe -r~. This would permit reuse of
the ~bkgpslog~ code for logging not just GPS data but things like
pressure, temperature, system statistics, etc. 
2020-07-05T16:35Z; bktei>
: bklog -r age1asdf -o log.tar # encrypt/compress stdin to log.tar
: bklog -x -f log.tar -i age.key -O /tmp  # extract and decrypt

Making ~bklog~ follow the [[https://en.wikipedia.org/wiki/Unix_philosophy][Unix philosophy]] means that it shouldn't care
what kind of text is fed to it.

*** ~bklog~ Design vs. Unix Philosophy
**** Pubkey dir watching
The feature of periodically checking a directory for changes in the
pubkeys it contains should be justified by its usefulness; if the
complexity cannot be justified then the feature should be removed.
**** Defaults vs options
Many options can cause the tool to become complex in unjustifiable
ways. Currently I am adding options because I want the ability to
modify the script's behavior without having to modify the source code
on the machine in which the code is running. I should consider
removing features at some point and having the program force defaults
on the user. For example, allowing the specification of a temporary
directory, while useful for me, is probably not useful for most people
who don't know or care about the difference between ~/tmp~ and
~/dev/shm~.
**** Script time to live (TTL)
I initially implemented a script time-to-live feature because I was
unsure in my ability to program script that could run for long periods
of time without causing a runaway usage of memory. I still think it's
a good idea to offer a script TTL option to the user but I think the
default should be to simply run forver.

2020-07-12T21:11Z; bktei> ~bklog~ script created and tested as of
commit ~aedd19f~.

** DONE TODO: Evaluate ~rsyslog~ as stand-in for this work
   CLOSED: [2020-07-12 Sun 21:09]
2020-07-05T02:57Z; bktei> I searched for "debian iot logging" ("iot"
as in "Internet of Things", the current buzzword for small low-power
computers being used to provide microservices for owners in their own
home) and came across several search results mentioning ~syslog~ and
~rsyslog~.

https://www.thissmarthouse.net/consolidating-iot-logs-into-mysql-using-rsyslog/
https://rsyslog.readthedocs.io/en/latest/tutorials/tls.html
https://serverfault.com/questions/20840/how-would-you-send-syslog-securely-over-the-public-internet
https://www.rsyslog.com/

My impression is that ~rsyslog~ is a complex software package designed
to offer many features, some of which possibly might satisfy my
needs.

However, as stated in the repository README, the objective of the
~ninfacyzga-01~ project is "Observing facts of the new". This means
that the goal is not only to record location data but any data that
can be captured by a sensor. This means the capture of the following
environmental phenomena are within the scope of this device:

*** Sounds (microphone)
*** Light (camera)
*** Temperature (thermocouple)
*** Air Pressure (barometer)
*** Acceleration Vector (acceleromter / gyroscope)
*** Magnetic Field Vector (magnetometer)

This brings up the issue of respecting privacy of others in shared
spaces through which ~ninfacyzga-01~ may pass through. ~ninfacyzga-01~
should encrypt data it records according to rules set by its
owner.

One permissive rule could be that if ~ninfacyzga-01~ detects that a
person (let's call her Alice) enters a room, it should add Alice's
encryption public key to the list of recipients against which it
encrypts data without Alice having to know how ~ninfacyzga-01~ is
programmed (she might have a ~calkuptcana~ agent on her person that
broadcasts her privacy preferences). Meanwhile, ~ninfacyzga-01~ may
publish its observations to a repository that Alice and other members
of the shared communal space have access to (ex: a read-only shared
directory on a local network WiFi). Alice could download all the files
in the shared repository but she would only be able to decrypt files
generated when she was physically near enough to ~ninfacyzga-01~ for
it to detect that her presence was within some spatial boundary.

A more restrictive rule could resemble the permissive rule in that
~ninfacyzga-01~ uses Alice's encryption public key only when she is
physically near by, except that it encrypts logged files against
public keys in a sequential manner. This would mean that all people
who were near ~ninfacyzga-01~ would have to pass around each log file
to eachother so that they could decrypt the content.

That said, according to [[https://www.rsyslog.com/doc/master/tutorials/database.html][this ~rsyslog~ page]], ~rsyslog~ is more a data
wrangling system for collecting data from disparate sources of
different types and outputting data to text files on disk than a
system committed to the server-client model of database storage. So, I
think converting ~bkgpslog~ into a ~bklog~ script that appends
encrypted and compressed data to a tar file for later extraction
(possibly the same script with future features) would be best.

2020-07-12T21:10Z; bktei> rsyslog is outside the scope of what
~bkgpslog~ does (record location observations). A different tool
should be used to retrieve and synchronize data. The dumb storage
method of "tar files in a syncthing folder" works for now.
** TODO: Place persistent recip. updates in asynchronous coproc
2020-07-06T19:37Z; bktei> In order to update the recipient list, the
magicParseRecipientDir() function needs to be run each buffer period
in order to scan for changes in the recipient list. However, such a
scan takes time; if the magicGatherWriteBuffer() function must pause
until magicParseRecipientDir() completes, then a significant pause
between buffer sessions may occur, causing detectable gaps in location
data between buffer rounds.

I looked for ways in which I might start magicParseRecipientDir()
asynchronously immediately before running the data collection command
and then collect its output at the start of the next buffer round. One
way using the ~coproc~ Bash built-in is described [[https://stackoverflow.com/a/20018504/10850071][here]]. I'd have to
make the asynchronous function output the recipient list to stdout
which would then be ~read~ into the ~recPubKeysValid~ array in the
main loop. However, for now, I'm putting the magicParseRecipientDir()
as-is in the main loop and accepting the delay for now.
* bkgpslog narrative
** Initialize environment
*** Init variables
**** Save timeStart (YYYYmmddTHHMMSS±zz)
*** Define Functions
**** Define Debugging functions
**** Define Argument Processing function
**** Define Main function
** Run Main Function
*** Process Arguments
*** Set output encryption and compression option strings
*** Check that critical apps and dirs are available, displag missing ones.
*** Set lifespans of script and buffer
*** Init temp working dir ~DIR_TMP~
Make temporary dir in tmpfs dir: ~/dev/shm/$(nonce)..bkgpslog/~ (~DIR_TMP~)
*** Initialize ~tar~ archive
**** Write ~bkgpslog~ version to ~$DIR_TMP/VERSION~
**** Create empty ~tar~ archive in ~DIR_OUT~ at ~PATHOUT_TAR~

Set output file name to:
: PATHOUT_TAR="$DIR_OUT/YYYYmmdd..hostname_location.gz.age.tar"
Usage: ~iso8601Period $timeStart $timeEnd~ 

**** Append ~VERSION~ file to ~PATHOUT_TAR~

Append ~$DIR_TMP/VERSION~ to ~PATHOUT_TAR~ via ~tar --append~

*** Read/Write Loop (Record gps data until script lifespan ends)
**** Determine output file paths
**** Define GPS conversion commands
**** Fill Bash variable buffer from ~gpspipe~
**** Process bufferBash, save secured chunk set to ~DIR_TMP~
**** Append each secured chunk to ~PATHOUT_TAR~
: tar --append --directory=DIR_TMP --file=PATHOUT_TAR $(basename PATHOUT_{NMEA,GPX,KML} )
**** Remove secured chunk from ~DIR_TMP~