use generic variables in -no-pm code too

diff --git a/examples/all-in-one-no-pm.py b/examples/all-in-one-no-pm.py
index f7ebcdcb42bbfeac369ab1a612fbf55ac0bbb0fd..962f627548fe0c0b62395e3dacb59e8a755de74a 100755 (executable)
--- a/examples/all-in-one-no-pm.py
+++ b/examples/all-in-one-no-pm.py
@@ -121,7 +121,7 @@ try:
 
         # One mode for each variable
         if mode == 0:
 
         # One mode for each variable
         if mode == 0:

-            variable = "temperature"
+            # variable = "temperature"

             unit = "C"
             cpu_temp = get_cpu_temperature()
             # Smooth out with some averaging to decrease jitter
             unit = "C"
             cpu_temp = get_cpu_temperature()
             # Smooth out with some averaging to decrease jitter


@@ -129,49 +129,49 @@ try:
             avg_cpu_temp = sum(cpu_temps) / float(len(cpu_temps))
             raw_temp = bme280.get_temperature()
             data = raw_temp - ((avg_cpu_temp - raw_temp) / factor)
             avg_cpu_temp = sum(cpu_temps) / float(len(cpu_temps))
             raw_temp = bme280.get_temperature()
             data = raw_temp - ((avg_cpu_temp - raw_temp) / factor)

-            display_text(variable, data, unit)
+            display_text(variables[mode], data, unit)

 
         if mode == 1:
 
         if mode == 1:

-            variable = "pressure"
+            # variable = "pressure"

             unit = "hPa"
             data = bme280.get_pressure()
             unit = "hPa"
             data = bme280.get_pressure()

-            display_text(variable, data, unit)
+            display_text(variables[mode], data, unit)

 
         if mode == 2:
 
         if mode == 2:

-            variable = "humidity"
+            # variable = "humidity"

             unit = "%"
             data = bme280.get_humidity()
             unit = "%"
             data = bme280.get_humidity()

-            display_text(variable, data, unit)
+            display_text(variables[mode], data, unit)

 
         if mode == 3:
 
         if mode == 3:

-            variable = "light"
+            # variable = "light"

             unit = "Lux"
             if proximity < 10:
                 data = ltr559.get_lux()
             else:
                 data = 1
             unit = "Lux"
             if proximity < 10:
                 data = ltr559.get_lux()
             else:
                 data = 1

-            display_text(variable, data, unit)
+            display_text(variables[mode], data, unit)

 
         if mode == 4:
 
         if mode == 4:

-            variable = "oxidised"
+            # variable = "oxidised"

             unit = "kO"
             data = gas.read_all()
             data = data.oxidising / 1000
             unit = "kO"
             data = gas.read_all()
             data = data.oxidising / 1000

-            display_text(variable, data, unit)
+            display_text(variables[mode], data, unit)

 
         if mode == 5:
 
         if mode == 5:

-            variable = "reduced"
+            # variable = "reduced"

             unit = "kO"
             data = gas.read_all()
             data = data.reducing / 1000
             unit = "kO"
             data = gas.read_all()
             data = data.reducing / 1000

-            display_text(variable, data, unit)
+            display_text(variables[mode], data, unit)

 
         if mode == 6:
 
         if mode == 6:

-            variable = "nh3"
+            # variable = "nh3"

             unit = "kO"
             data = gas.read_all()
             data = data.nh3 / 1000
             unit = "kO"
             data = gas.read_all()
             data = data.nh3 / 1000

-            display_text(variable, data, unit)
+            display_text(variables[mode], data, unit)

 
 # Exit cleanly
 except KeyboardInterrupt:
 
 # Exit cleanly
 except KeyboardInterrupt:

diff --git a/examples/all-in-one.py b/examples/all-in-one.py
index bfefe7ad4c0824f58514da53d894ec5d0402dcbd..63439519670181ad5e6467e057aa6556588d7cf8 100755 (executable)
--- a/examples/all-in-one.py
+++ b/examples/all-in-one.py
@@ -183,7 +183,7 @@ try:
             display_text(variables[mode], data, unit)
 
         if mode == 7:
             display_text(variables[mode], data, unit)
 
         if mode == 7:

-            #variable = "pm1"
+            # variable = "pm1"

             unit = "ug/m3"
             try:
                 data = pms5003.read()
             unit = "ug/m3"
             try:
                 data = pms5003.read()