README.md

   1 # Enviro+
   2
   3 Designed for environmental monitoring, Enviro+ lets you measure air quality (pollutant gases and particulates), temperature, pressure, humidity, light, and noise level. Learn more - https://shop.pimoroni.com/products/enviro-plus
   4
   5
   6 [![Build Status](https://travis-ci.com/pimoroni/enviroplus-python.svg?branch=master)](https://travis-ci.com/pimoroni/enviroplus-python)
   7 [![Coverage Status](https://coveralls.io/repos/github/pimoroni/enviroplus-python/badge.svg?branch=master)](https://coveralls.io/github/pimoroni/enviroplus-python?branch=master)
   8 [![PyPi Package](https://img.shields.io/pypi/v/enviroplus.svg)](https://pypi.python.org/pypi/enviroplus)
   9 [![Python Versions](https://img.shields.io/pypi/pyversions/enviroplus.svg)](https://pypi.python.org/pypi/enviroplus)
  10
  11 # Installing
  12
  13 You're best using the "One-line" install method if you want all of the UART serial configuration for the PMS5003 particulate matter sensor to run automatically.
  14
  15 **Note** The code in this repository supports both the Enviro+ and Enviro Mini boards. _The Enviro Mini board does not have the Gas sensor or the breakout for the PM sensor._
  16
  17 ![Enviro Plus pHAT](./Enviro-Plus-pHAT.jpg)
  18 ![Enviro Mini pHAT](./Enviro-mini-pHAT.jpg)
  19
  20 ## One-line (Installs from GitHub)
  21
  22 ```
  23 curl -sSL https://get.pimoroni.com/enviroplus | bash
  24 ```
  25
  26 **Note** report issues with one-line installer here: https://github.com/pimoroni/get
  27
  28 ## Or... Install and configure dependencies from GitHub:
  29
  30 * `git clone https://github.com/pimoroni/enviroplus-python`
  31 * `cd enviroplus-python`
  32 * `sudo ./install.sh`
  33
  34 **Note** Raspbian Lite users may first need to install git: `sudo apt install git`
  35
  36 ## Or... Install from PyPi and configure manually:
  37
  38 * Run `sudo pip install enviroplus`
  39
  40 **Note** this wont perform any of the required configuration changes on your Pi, you may additionally need to:
  41
  42 * Enable i2c: `raspi-config nonint do_i2c 0`
  43 * Enable SPI: `raspi-config nonint do_spi 0`
  44
  45 And if you're using a PMS5003 sensor you will need to:
  46
  47 * Enable serial: `raspi-config nonint set_config_var enable_uart 1 /boot/config.txt`
  48 * Disable serial terminal: `sudo raspi-config nonint do_serial 1`
  49 * Add `dtoverlay=pi3-miniuart-bt` to your `/boot/config.txt`
  50
  51 And install additional dependencies:
  52
  53 ```
  54 sudo apt install python-numpy python-smbus python-pil python-setuptools
  55 ```
  56
  57 ## Alternate Software & User Projects
  58
  59 * enviro monitor - https://github.com/roscoe81/enviro-monitor
  60 * mqtt-all - https://github.com/robmarkcole/rpi-enviro-mqtt - now upstream: [see examples/mqtt-all.py](examples/mqtt-all.py)
  61 * adafruit_io.py - https://github.com/dedSyn4ps3/enviroplus-python/blob/master/examples/adafruit_io.py - uses Adafruit Blinka and BME280 libraries to publish to Adafruit IO
  62
  63 ## Help & Support
  64
  65 * GPIO Pinout - https://pinout.xyz/pinout/enviro_plus
  66 * Support forums - http://forums.pimoroni.com/c/support
  67 * Discord - https://discord.gg/hr93ByC