From b9a2869d1be42fd814a75901466a639b09f9c4e0 Mon Sep 17 00:00:00 2001 From: Steven Baltakatei Sandoval Date: Thu, 8 Oct 2020 18:03:17 +0000 Subject: [PATCH 1/1] doc(location/README):Note how to enable serial port for gpsd --- doc/location/README.org | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/doc/location/README.org b/doc/location/README.org index 06860d2..a5fff7a 100644 --- a/doc/location/README.org +++ b/doc/location/README.org @@ -5,7 +5,7 @@ ** About This document was created by Steven Baltakatei Sandoval on ~2020-06-29T12:14Z~ under a [[https://creativecommons.org/licenses/by-sa/4.0/][Creative Commons BY-SA 4.0 license]]. It -was updated by Steven Baltakatei Sandoval on ~2020-10-08T00:18Z~ +was updated by Steven Baltakatei Sandoval on ~2020-10-08T18:03Z~ ** Narrative Ninfacyzga-01 records (logs) its position in time and space using a @@ -107,6 +107,35 @@ Install ~gpsd~, ~gpsd-clients~. : $ sudo apt install gpsd gpsd-clients +***** Setup Serial for BerryGPS +The Ozzmaker BerryGPS-IMU unit requires that the serial console be +disabled and the serial port enabled. (see [[https://ozzmaker.com/berrygps-setup-guide-raspberry-pi/][ref]]). + +: $ sudo raspi-config + +Navigate to ~5 Interfacing Options~, then ~P6 Serial~. + +When prompted "Would you like a login shell to be accessible over +serial?", answer ~No~. + +When prompted "Would you like the serial port hardware to be +enabled?", answer ~Yes~. + +***** Configure ~gpsd~ +~gpsd~ needs to know which serial port to look at for NMEA location +data generated by the GPS unit. This can be done by modifying the +~gpsd~ configuration file at ~/etc/default/gpsd~. + +: sudo nano /etc/default/gpsd + +Change + +: DEVICES="" + +to + +: DEVICES="/dev/serial0" + ***** Automatic Start Configuration It is recommended to create a daily ~cron~ job that executes a bash script that starts ~bklog~ jobs to record location along with other -- 2.30.2