From: Steven Baltakatei Sandoval <baltakatei@gmail.com>
Date: Wed, 7 Oct 2020 23:46:16 +0000 (+0000)
Subject: doc(setup):Update README with SSH, git, and age details
X-Git-Url: https://zdv2.bktei.com/gitweb/EVA-2020-02.git/commitdiff_plain/f792ba512e4937b6d9fdfbee0b04dd412a71858e

doc(setup):Update README with SSH, git, and age details
---

diff --git a/doc/setup/README.org b/doc/setup/README.org
index cc575b7..4eb8e2f 100644
--- a/doc/setup/README.org
+++ b/doc/setup/README.org
@@ -5,7 +5,7 @@
 ** About
 This document created by [[http://baltakatei.com][Steven Baltakatei Sandoval]] on
 ~2020-10-07T18:39Z~ under a [[http://creativecommons.org/licenses/by-sa/4.0/][CC BY-SA 4.0]] license and last updated on
-~2020-10-07T23:11Z~.
+~2020-10-07T23:46Z~.
 
 This document contains information regarding setup of the
 ninfacyzga-01 hardware common to all operation modes. This includes:
@@ -121,7 +121,6 @@ cat location.gpx.age | age -d -i key.txt > location.gpx
 
 The version of ~age~ used to perform the encryption 
 
-
 ** Operating Procedures
 *** Initial Startup
 **** Physical Setup
@@ -161,7 +160,7 @@ Replace ~<Name of your wireless LAN>~ with your WiFi network's SSID.
 
 Replace ~<Password for your wireless LAN>~ with your WiFi network's
 passphrase.
-***** Configure Remote SSH Login
+***** Enable Remote SSH Login
 Configure SSH to permit remote administration via the command line
 interface. Raspberry Pi Foundation instructions [[https://www.raspberrypi.org/documentation/remote-access/ssh/README.md][here]].
 
@@ -169,6 +168,15 @@ In summary, remote SSH access may be enabled upon initial startup of a
 freshly installed image of Raspberry Pi OS by making sure an empty
 file named ~ssh~ is present on the ~boot~ partition.
 
+***** Add SSH public key
+If the use has an SSH public key, it may be added as a line in
+~~/.ssh/authorized_keys~.
+
+Follow [[https://superuser.com/a/925859/][these]] directions to set permissions.
+
+: $ chmod 700 ~/.ssh
+: $ chmod 644 ~/.ssh/authorized_keys
+
 ***** Change default passphrase
 The default username is ~pi~ and the default passphrase is
 ~raspberry~. Change them to something unique.
@@ -182,6 +190,21 @@ Update software with distribution repository.
 : $ sudo apt upgrade -y
 : $ sudo apt dist-upgrade -y
 
+***** Update hostname
+A unique hostname is required to uniquely identify the device on the
+network.
+
+Start up the Raspberry Pi Software Configuration Tool by running:
+: $ sudo raspi-config
+
+- Select `2 Network Options`
+- Select `N1 Hostname`
+
+This document recommends a hostname beginning with the prefix:
+: ninfacyzga-1-
+
+An example hostname would be ~ninfacyzga-1-2~.
+
 ***** Install software
 ****** ~unattended-upgrades~
 Make sure to install the ~unattended-upgrades~ package to make sure
@@ -202,7 +225,8 @@ Install ~syncthing~ for log file transfer capability.
 : $ sudo apt install syncthing
 
 ****** ~git~
-Install ~git~ for downloading this repository to the device.
+~git~ facilitates downloading files from this repository to the
+device. It may be installed via:
 
 : $ sudo apt install git
 
@@ -217,17 +241,22 @@ those of the ~master~ branch).
 : $ git checkout --track origin/develop
 
 ****** ~age~
+~age~ is required for encrypting data at rest.
+
 Place ~age~ binary (the one compiled for ARM CPU architecture for
 Linux) in ~$HOME/.local/bin~. A copy of binary may be found within the
 ~exec~ directory.
 
+: $ mkdir ~/.local/bin
+: $ cp exec/age ~/.local/bin/
+
 ***** Disable Swap File
-Since standard Raspbian 10 (Buster) install involves copying
-unencrypted file system image to SD card which is mounted by the
-Raspberry Pi, system memory may be written to disk in the form of a
-Swap file as described [[https://ideaheap.com/2013/07/stopping-sd-card-corruption-on-a-raspberry-pi/][here]]. In order to reduce the chance that
-location log data is ever written to disk, swap file functionality
-must be disabled[fn:ideaheap_20130731_disableswap].
+Since standard Raspberry OS 10 install involves copying unencrypted
+file system image to SD card which is mounted by the Raspberry Pi,
+system memory may be written to disk in the form of a Swap file as
+described [[https://ideaheap.com/2013/07/stopping-sd-card-corruption-on-a-raspberry-pi/][here]]. In order to reduce the chance that location log data
+is ever written to disk, swap file functionality must be
+disabled[fn:ideaheap_20130731_disableswap].
 
 Raspbian 10 uses dphys-swapfile to manage a swap file. It may be
 disabled persistently[fn:rpf_20190702_disableswappersist] by running