From: Steven Baltakatei Sandoval <baltakatei@gmail.com>
Date: Tue, 13 Oct 2020 18:37:15 +0000 (+0000)
Subject: doc(time):Prpeare update for README
X-Git-Url: https://zdv2.bktei.com/gitweb/EVA-2020-02.git/commitdiff_plain/d50056c252de758c21e28606056de58d64b55950?hp=--cc

doc(time):Prpeare update for README
---

d50056c252de758c21e28606056de58d64b55950
diff --git a/doc/time/README.org b/doc/time/README.org
index 6ec544d..593b411 100644
--- a/doc/time/README.org
+++ b/doc/time/README.org
@@ -1,7 +1,8 @@
-* Time 
+* Time Tracking
 This document was created by Steven Baltakatei Sandoval on
 ~2020-07-23T22:27Z~ under a [[https://creativecommons.org/licenses/by-sa/4.0/][Creative Commons BY-SA 4.0 license]]. It
-was updated by Steven Baltakatei Sandoval on ~2020-10-12T22:22Z~
+was updated by Steven Baltakatei Sandoval on ~2020-10-13T18:02Z~
+
 ** Development Task list
 *** Set up prototype unit
 **** DONE Solder wire for PPS signal
@@ -13,6 +14,21 @@ was updated by Steven Baltakatei Sandoval on ~2020-10-12T22:22Z~
 - [[https://gpsd.gitlab.io/gpsd/gpsd-time-service-howto.html][GPSD dev ref]] page for ~gpsd~ interfacing with ~ntp~.
 - [[https://raspberryautomation.com/connect-multiple-ds18b20-temperature-sensors-to-a-raspberry-pi/][Raspberry Autom]] article on specifying custom GPIO pin.
 *** Document prototype unit
+**** Summarize setup steps
+***** Perform main setup steps
+***** Install time-specific apps
+: $ sudo apt install usbmount eject gpsd gpsd-clients python-gps pps-tools ntp
+
+Explanation:
+
+- ~python-gps~: (Add explanation here)
+- ~pps-tools~: Package containing ~ppstest~ command useful for
+  checking status of PPS devices.
+- ~ntpsec~: Security-hardened version of ~ntp~, the Network Time
+  Protocol package. Useful for automatically setting the system clock
+  according to time servers or local hardware.
+
+
 **** TODO Integrate DHCP details from gregledet tutorial
 http://www.gregledet.net/computers/building-a-stratum-1-ntp-server-with-a-raspberry-pi-4-and-adafruit-ultimate-gps-hat/
 **** TODO Note working ntp.conf file
@@ -108,14 +124,20 @@ restrict source notrap nomodify noquery
 
 ** Narrative
 The ~ninfacyzga-01~ device is equipped with an Ozzmaker BerryGPS-IMU
-module which provides time and location data to ~gpsd~. The time is
-provided by GPS satellites which themselves are [[https://science.nasa.gov/science-news/science-at-nasa/2002/08apr_atomicclock/][equipped]] with atomic
-clocks. This extremely accurate set of clocks are needed since a GPS
-receiver calculates its position in space using a General Relativity
+module which provides time and location data to ~gpsd~ and ~ntp~. The
+time is provided by GPS satellites which themselves are
+equipped [fn:nasa_20020408_atomicclock] with atomic clocks. This
+extremely accurate set of clocks are needed since a GPS receiver
+calculates its position in space using a General Relativity
 calculation that uses the small variations in the time stamps received
 from each satellite. This means that ~gpsd~ may be used to set the
 system clock without a need for an internet connection to a default
 Debian time server; ~ninfacyzga-01~ can be its own time server.
+
+[fn:nasa_20020408_atomicclock] Title:[[https://science.nasa.gov/science-news/science-at-nasa/2002/08apr_atomicclock/][Tick-Tock Atomic Clock]];
+Date:2002-04-08; Website:NASA.gov; [[https://web.archive.org/web/20100429141752/http://science.nasa.gov/science-news/science-at-nasa/2002/08apr_atomicclock/][Archive-link]]; Archive-date:
+2010-04-29
+
 ** Description
 *** Hardware
 Ozzmaker BerryGPS-IMU, Version 3
@@ -125,6 +147,8 @@ into a time server using ~gpsd~.
 ** Operating Procedures
 *** Initial Startup
 **** Install Raspbian 10 (Buster) onto a Raspberry Pi Zero W.
+
+
 **** Install Hardware
 See [[https://ozzmaker.com/forums/topic/connecting-gps-pps-pin/][this]] Ozzmaker forum topic about connecting the BerryGPS-IMU
 ~T_PULSE~ pin to GPIO 18.