X-Git-Url: https://zdv2.bktei.com/gitweb/EVA-2020-02.git/blobdiff_plain/88b5ae54ac488cd5f8780205829b668021ea7a11..791bffac5ada00fc38302eb71f07a40269801b34:/doc/time/README.org?ds=sidebyside diff --git a/doc/time/README.org b/doc/time/README.org index e662695..5351973 100644 --- a/doc/time/README.org +++ b/doc/time/README.org @@ -4,12 +4,12 @@ * Time Tracking ** About This document was created by Steven Baltakatei Sandoval on -~2020-07-23T22:27Z~ under a [[https://creativecommons.org/licenses/by-sa/4.0/][Creative Commons BY-SA 4.0 license]]. It -was updated by Steven Baltakatei Sandoval on ~2020-10-16T22:26Z~ +~2020-07-23T22:27Z~ under a [[https://creativecommons.org/licenses/by-sa/4.0/][Creative Commons BY-SA 4.0 license]]. It was +updated by Steven Baltakatei Sandoval on ~2020-10-18T00:11Z~ ** Narrative The ~ninfacyzga-01~ device is equipped with an Ozzmaker BerryGPS-IMU -module which provides time and location data to ~gpsd~ and ~ntpsec~. The +module which provides time and location data to ~gpsd~ and ~chrony~. The time is provided by GPS satellites which themselves are equipped [fn:nasa_20020408_atomicclock] with atomic clocks. This extremely accurate set of clocks are needed since a GPS receiver @@ -27,18 +27,20 @@ Date:2002-04-08; Website:NASA.gov; [[https://web.archive.org/web/20100429141752/ *** Hardware Ozzmaker BerryGPS-IMU, Version 3 (see [[https://ozzmaker.com/berrygps-berrygps-imu-quick-start-guide/][ref]]). *** Software +- [[https://www.raspberrypi.org/downloads/raspberry-pi-os/][Raspberry Pi OS]] : A GNU/Linux operating system derived from + Debian 10. This procedure was developed with version ~August 2020~. + - [[https://tracker.debian.org/pkg/gpsd][~gpsd~]] : A background daemon app capable of interfacing with the [[https://ozzmaker.com/berrygps-berrygps-imu-quick-start-guide/][Ozzmaker BerryGPS-IMU]]'s GPS submodule. Installed and initialized by ~apt~. Should be installed along with the ~gpsd-clients~ package. This procedure was developed with ~gpsd~ version -- [[https://tracker.debian.org/pkg/ntpsec][~ntpsec~]] : A security-hardned version of [[https://tracker.debian.org/pkg/ntp][~ntp~]] which is a "[[https://en.wikipedia.org/wiki/Network_Time_Protocol][Network - Time Protocol]]" app that synchronizes the system clock with local or - remote time servers or devices. It is capable of extracting time - data from a GPS signal handled by ~gpsd~. It is also capable of - using the high precision PPS (pulse-per-second) signal handled by - ~gpsd~. Installed via ~apt~. This procedure was developed with - ~ntpsec~ version ~1.1.3~. +- [[https://chrony.tuxfamily.org/][~chrony~]] : A set of programs capable of continuously adjusting the + system clock until it is synchronized with configurable time sources + such as GPS and PPS data provided by ~gpsd~. ~chrony~ may be + configured to act as an NTP time client or server. It uses the same + protocol as ~ntp~ but is a GPLv2 implementation. This procedure was + developed with ~chrony~ version ~3.4-4~. ** Operating Procedures *** Initial Startup @@ -63,7 +65,7 @@ recommended, see this [[https://raspberryautomation.com/connect-multiple-ds18b20 **** Install Software for time tracking The time tracking function can be performed by two programs: ~gpsd~ -and ~ntpsec~. +and ~chrony~. Basically, two things need to happen: @@ -71,15 +73,15 @@ Basically, two things need to happen: incoming GPS data (in NMEA format) and the PPS signal ("pulse per second"; a high precision time signal). -2. ~ntpsec~ needs to be pointed towards the correct local IP addresses +2. ~chrony~ needs to be pointed towards the correct local IP addresses where ~gpsd~ provides GPS data and the PPS signal. -~gpsd~ then will provide GPS and PPS data to ~ntpsec~ via a "shared +~gpsd~ then will provide GPS and PPS data to ~chrony~ via a "shared memory driver". ***** Install packages via ~apt~ Run the following command to install the required packages. -: $ sudo apt install gpsd gpsd-clients python-gps pps-tools ntpsec +: $ sudo apt install gpsd gpsd-clients python-gps pps-tools chrony ***** Enable PPS device Modify the ~/boot/config.txt~ file in order to tell the Raspberry Pi @@ -87,6 +89,7 @@ to expect PPS data on ~BCM 18~ (pin number 12; see [[https://pinout.xyz/][link]] by adding the following line to ~/boot/config.txt~ as described on [[https://ozzmaker.com/forums/topic/problems-with-pps-on-a-pi0w-running-raspian-and-attached-to-a-berrygps-imuv3/][this Ozzmaker page]]: +: # Enable PPS on GPIO 18 : dtoverlay=pps-gpio,gpiopin=18 The ~/boot/config.txt~ file can be modified via: @@ -114,21 +117,13 @@ Note: For older Raspberry Pi models, it may be necessary to enable The Ozzmaker BerryGPS-IMU makes NMEA sentences available via the serial "UART" device ~/dev/ttyAMA0~. If bluetooth has not been disabled, the Raspberry Pi OS automatically creates a software "UART" -device at ~/dev/serial0~. See the "[[file:~/git-OC/ninfacyzga-01/doc/setup/README.org::*Disable%20Bluetooth][Disable Bluetooth]]" section in the +device at ~/dev/serial0~. See the "[[file:../setup/README.org::*Disable%20Bluetooth][Disable Bluetooth]]" section in the [[file:../setup/README.org][Main Setup]] Initial Startup procedure for instructions on how to disable bluetooth to free up ~/dev/ttyAMA0~ for use by ~gpsd~. -Note: Older ~ntp~ documentation indicates that ~ntp~ (and presumably -~ntpsec~ might be able to access GPS data (ex: NMEA sentences) without -the aid of ~gpsd~ itself if the data is available at a device named -~/dev/ggp0~. Similarly, the same might apply to PPS data and the -~/dev/gpspps0~ device. However, since the Raspberry Pi OS overlay -system automatically creates ~/dev/pps0~ using the modifications to -~/boot/config.txt~ (described [[*Enable PPS device][elsewhere]] in this procedure). - ***** Setup ~gpsd~ -See the "[[file:~/git-OC/ninfacyzga-01/doc/location/README.org::*Setup%20~gpsd~][Setup ~gpsd~]]" subsection within the "Initial Startup" section -of the Location Logging [[file:~/git-OC/ninfacyzga-01/doc/location/README.org][~README.org~]] file. There is one additional +See the "[[file:../location/README.org::*Setup%20~gpsd~][Setup ~gpsd~]]" subsection within the "Initial Startup" section +of the Location Logging [[file:../location/README.org][~README.org~]] file. There is one additional change that must be made which is to add a ~/dev/pps0~ item to the ~DEVICES=~ line in ~/etc/default/gpsd~ like so: @@ -148,181 +143,100 @@ DEVICES="/dev/ttyAMA0 /dev/pps0" GPSD_OPTIONS="-n" #+END_EXAMPLE -***** Setup ~ntpsec~ -The ~ntpsec~ configuration file at ~/etc/ntpsec/ntp.conf~ must be -modified to tell ~ntpsec~ how to retrieve and interpret the GPS and -PPS data provided by ~gpsd~. +Make sure to enable ~gpsd~ to automatically start as a system service. -In summary, lines need to be added telling ~ntpsec~ how often to poll -certain sources (local or remote) for time information as well as how -to prioritize and label information from each source. +: $ sudo systemctl enable gpsd +: $ sudo systemctl start gpsd -~ntpsec~ uses syntax simplified from that of ~ntp~. Specifically, it -recommends use of the ~refclock~ keyword for configuring local -hardware clocks such as GPS and PPS devices. +***** Setup ~chrony~ +Modify the configuration file for ~chrony~ at ~/etc/chrony/chrony.conf~. -Below is an example of lines that may be added to -~/etc/ntpsec/ntp.conf~ in order to ensure that the system clock will always have +: $ sudo nano /etc/chrony/chrony.conf + +Add the following lines: #+BEGIN_EXAMPLE -# Local time sources +# Get time from GPS (/dev/XXXX) and PPS (/dev/YYYY) +#refclock SOCK /run/chrony.XXXX.sock refid GPS precision 1e-1 offset 0.0000 +#refclock SOCK /run/chrony.YYYY.sock refid PP precision 1e-7 +refclock SHM 0 refid GPS precision 1e-1 offset 0.0000 delay 0.2 stratum 1 +refclock SHM 1 refid PPS precision 1e-7 stratum 1 +#+END_EXAMPLE -# Kernel PPS (precision seconds; driver 22) -refclock pps unit 0 refid kPPS flag3 1 minpoll 4 maxpoll 4 stratum 1 +Where +- ~XXXX~ : the basename of the GPS device's serial port. In this guide + it should be ~ttyAMA0~; other setups may use ~ttyS0~, ~ttyACM0~, or + ~serial0~. -# GPS PPS reference (precision seconds; driver 28; root) (NTP1) -refclock shm unit 1 refid PPS minpoll 4 maxpoll 4 iburst stratum 1 +- ~YYYY~ : the basename of the PPS device's serial port. In this guide + it should be ~pps0~. -# GPS Serial data reference (coarse time; driver28; root) (NTP0) -refclock shm unit 0 refid GPS prefer time1 0.109 minpoll 4 maxpoll 4 iburst stratum 1 +Note: The ~refclock SOCK~ lines are left as comments in case ~gpsd~ +incorrectly maps the GPS and PPS data. -# GPS PPS reference (precision seconds; driver 28; user) (NTP2) -refclock shm unit 2 refid PPSuser minpoll 4 maxpoll 4 iburst stratum 1 +The following commands may be useful for testing ~gpsd~ and ~chrony~ +configurations. +- ~chronyc sources -v~ : Shows time sources and associated accuracy + information. -# Tolerate outliers (useful for coarse clocks) -tos mindist 0.500 -#+END_EXAMPLE +- ~chronyc tracking~ : Shows the current time difference between + the reference clock and the system clock. Note: ~chrony~ gradually + attempts to reduce the difference by changing the system clock. + +- ~sudo chronyc makestep~ : Force ~chrony~ to set the system clock to + match the reference clock immediately. + +- ~sudo systemctl enable chrony~ : Enable automatic startup of + ~chrony~ (Note: This command shouldn't be necessary since the act of + installing ~chrony~ via ~sudo apt install chrony~ should + automatically enable it). + +- ~sudo systemctl stop chrony~ : Stop ~chrony~. -A complete working example of an ~ntp.conf~ file is found in Appendix -A of this document. +- ~sudo systemctl restart chrony~ : Restart ~chrony~. -Commands useful for examining the shared memory driver used by ~gpsd~ -and ~ntpsec~ are: +- ~systemctl status chrony~ : Check status of ~chrony~ service. - ~sudo ntpshmmon~ : Shows live output of data using the shared memory - driver. ([[https://gpsd.gitlab.io/gpsd/gpsd-time-service-howto.html][ref]]) + driver filled by ~gpsd~. ([[https://gpsd.gitlab.io/gpsd/gpsd-time-service-howto.html][ref]]) - ~sudo ipcs -m~ : Show live segments of the shared memory. ([[https://gpsd.gitlab.io/gpsd/gpsd-time-service-howto.html][ref]]) -General references for this configuration file are: - -- "Raspberry Pi as a Stratum-1 NTP Server - Updating to the final NTP - configuration file" by David Taylor. [[http://www.satsignal.eu/ntp/Raspberry-Pi-NTP.html#ntp-conf][Link]]. Date: 2020-03-24. Note: - An example of kernel PPS transfer from ~gpsd~ to ~ntp~ via - ~127.127.22.0~. - -- "GPSD Time Service HOWTO" by Garry E. Miller. [[https://gpsd.gitlab.io/gpsd/gpsd-time-service-howto.html][Link]]. Date: - 2020-06-28. Note: Explains how shared memory segments available at - ~127.127.28.0~, ~127.127.28.1~, ~127.127.28.2~, etc. work in context - of an ~ntp~ configuration file. - -- "Building a Stratum 1 NTP Server with a Raspberry Pi 4 and Adafruit - Ultimate GPS Hat". [[http://www.gregledet.net/computers/building-a-stratum-1-ntp-server-with-a-raspberry-pi-4-and-adafruit-ultimate-gps-hat/][Link]]. Date: 2020-02-23. Note: A concise example - between ~gpsd~ and ~ntp~ setup for a Raspberry Pi 4 using - ~127.127.28.0~ and ~127.127.28.1~. Recommends use of ~ntpsec~ - instead of ~ntp~. - -Expalantions of some ~ntpsec~ [[https://docs.ntpsec.org/latest/comdex.html][commands and options]] used in the -configuration file include: - -- ~refclock~ : An ~ntpsec~ keyword not present in ~ntp-4.2.8~ that is - meant to simplify configuration of reference clocks that use certain - [[https://docs.ntpsec.org/latest/refclock.html][drivers]] including ~pps~ ([[https://docs.ntpsec.org/latest/driver_pps.html][PPS Clock Discipline]]), ~shm~ ([[https://docs.ntpsec.org/latest/driver_shm.html][Shared Memory - Driver]]) . In ~ntp-4.2.8~ and earlier, in order to configure a clock, - instead of ~ntpsec~'s one keyword (~refclock~), two keywords would - be required (~server~ and ~fudge~). - -- ~server [address]~ : Tells ~ntpsec~ the address to query for time - information. May be IP address or URL. Additional options such as - ~minpoll~, ~maxpoll~, ~prefer~, and ~true~ may be added. - -- ~prefer~ : Indicates the source should be prioritized in some - way. How exactly the ~ntpsec~ mitigation rules (see [[https://docs.ntpsec.org/latest/prefer.html][ref]]) use the - ~prefer~ option is complicated but in the context of dealing with a - GPS source and a PPS source, the GPS source should have a ~prefer~ - option. The PPS source may have a ~prefer~ option but it is not - necessary; adding ~prefer~ to a PPS source is useful in the corner - case that the GPS source is less reliable than another source (ex: a - remote clock specified by ~server~). - -- ~... shm ... flag1 1~ : For an ~shm~ driver, tells ~ntpsec~ to - ignore the default sanity check that discards any time that is more - than 4-hours off from the system clock. Note that ~ntpsec~ treats - ~shm flag1 1~ in the opposite manner as ~ntp~ (see [[https://docs.ntpsec.org/latest/driver_shm.html][ref]]). - -- ~... shm ... time1 [float]~ : Tells ~ntpsec~ that a latency - time of ~[float]~ seconds is required for data to travel from the - address to ~ntpsec~ (ex: a USB hub in the case of a GPS device that - connects via USB). (see [[https://gpsd.gitlab.io/gpsd/gpsd-time-service-howto.html#_feeding_ntpd_from_gpsd][ref]]) This number of seconds should be - adjusted to reduce the `offset` time of the address indicated in the - output of the ~ntpq -pn~ command to near ~0.000~. Note that the - units of ~offset~ displayed by ~ntpq -pn~ are in milliseconds. - -- ~... refid [string]~ : Tells ~ntpsec~ a string used to label the source. - -- ~fudge~ : An ~ntp~ keyword that ~ntpsec~ developers do not recommend - using; ~ntpsec~ documentation for ~fudge~ is widthdrawn. For local - hardware providing GPS and PPS time information, ~fudge~ can mostly - be replaced with use of the ~refclock~ keyword instead. - -- ~fudge [address]~ : Tells ~ntpsec~ to consider additional options - when evaluating the accuracy of time from a given address. - -- ~fudge [address] ... flag3 1~ : An option that tells ~ntpsec~ to - enable "kernel PPS discipline" when interpreting the PPS signal at - the address. (see [[http://doc.ntp.org/4.2.8p7/drivers/driver22.html][ref]]). - -- ~stratum 1~ : Tells ~ntpsec~ to label the source as a "stratum 1" - time server. This means that it is a clock using NTP that is a - canonical (?) time source. For example, a stratum 0 NTP time server - would be an atomic clock. A stratum 1 NTP time server could be a - clock that uses a GPS receiver to synchronize to said atomic clock. - -- ~iburst~ : Tells ~ntpsec~ how often to query a source. - -- ~fudge [address] ... flag1 [float]~ : See description of ~... shm - ... time1 [float]~. - -- ~tos mindist [float]~ : Tells ~ntpsec~ to increase the tolerance for - outliers in the clock selection algorithm. Units of ~[float]~ are - seconds. The default value is ~0.001~ seconds. This [[http://doc.ntp.org/4.2.6/miscopt.html][reference]] - indicates that it is acceptable to raise this value for "clocks with - high jitter and a PPS signal". For the device being configured in - this guide, this is the case. ~ntpsec~ receives a kernel PPS signal - on ~127.127.22.0~ indicating when each second occurs but without - information about which second of the day is being ticked. ~ntpsec~ - receives a coarse time from ~127.127.28.0~ supplied by ~gpsd~ that - is derived from the NMEA sentences generated by the GPS receiver; - this coarse time (high jitter) lacks the precision of the PPS signal - since NMEA sentence transmission times are not well-controlled. - -****** Disable DHCP services affecting ~ntpsec~ -Some processes that use [[https://en.wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol][DHCP]] (Dynamic Host Configuration Protocol) may -cause configuration changes to configuration files of ~ntp~. Since -~ntpsec~ is similar to ~ntp~, it is reasonable to take action to -prevent this. - -Remove some files: - -: $ sudo rm /etc/dhcp/dhclient-exit-hooks.d/ntp -: $ sudo rm /lib/dhcpcd/dhcpcd-hooks/50-ntp.conf - -In the "request" block of ~dhclient.conf~, remove ~dhcp6.sntp-servers~ -and ~ntp-servers~. - -: $ sudo nano /etc/dhcp/dhclient.conf - -For example, the following section of ~dhclient.conf~: +- ~sudo date -s '2020-07-07T00:00+0000'~ : Manually sets time to a + string. + +An example output of ~sudo chronyc sources -v~ will show something +similar to this: #+BEGIN_EXAMPLE -send host-name = gethostname(); -request subnet-mask, broadcast-address, time-offset, routers, - domain-name, domain-name-servers, domain-search, host-name, - dhcp6.name-servers, dhcp6.domain-search, dhcp6.fqdn, dhcp6.sntp-servers, - netbios-name-servers, netbios-scope, interface-mtu, - rfc3442-classless-static-routes, ntp-servers; +pi@ninfacyzga-1-x:~ $ sudo chronyc sources -v +210 Number of sources = 6 + + .-- Source mode '^' = server, '=' = peer, '#' = local clock. + / .- Source state '*' = current synced, '+' = combined , '-' = not combined, +| / '?' = unreachable, 'x' = time may be in error, '~' = time too variable. +|| .- xxxx [ yyyy ] +/- zzzz +|| Reachability register (octal) -. | xxxx = adjusted offset, +|| Log2(Polling interval) --. | | yyyy = measured offset, +|| \ | | zzzz = estimated error. +|| | | \ +MS Name/IP address Stratum Poll Reach LastRx Last sample +=============================================================================== +#- GPS 1 4 377 21 +110ms[ +110ms] +/- 200ms +#* PPS 1 4 377 22 +2496ns[+3045ns] +/- 1000ns +^- vps-2d3ddab6.vps.ovh.ca 2 6 277 57 +1302us[+1304us] +/- 151ms +^? time.richiemcintosh.com 2 6 1 59 +2626us[+2628us] +/- 92ms +^- varuna.ga-group.nl 3 6 377 55 -3962us[-3960us] +/- 151ms +^- ntp3.junkemailfilter.com 2 6 377 58 -4561us[-4558us] +/- 80ms #+END_EXAMPLE -should be changed to: +General references for the ~chrony.conf~ file are: -#+BEGIN_EXAMPLE -send host-name = gethostname(); -request subnet-mask, broadcast-address, time-offset, routers, - domain-name, domain-name-servers, domain-search, host-name, - dhcp6.name-servers, dhcp6.domain-search, dhcp6.fqdn, - netbios-name-servers, netbios-scope, interface-mtu, - rfc3442-classless-static-routes; -#+END_EXAMPLE +- The ~chrony~ ~4.0~ documentation. ([[https://chrony.tuxfamily.org/doc/4.0/chrony.conf.html][ref]]) + +- The ~gpsd~ documentation for communicating with ~chrony~. ([[https://gpsd.gitlab.io/gpsd/gpsd-time-service-howto.html#_feeding_chrony_from_gpsd][ref]]) + +- Setup guide for a USB GPS with ~gpsd~ and ~chrony~. ([[https://photobyte.org/raspberry-pi-stretch-gps-dongle-as-a-time-source-with-chrony-timedatectl/][ref]]) ***** Disable CPU power saving Power saving featurs of the Raspberry Pi Zero W may also be disabled @@ -374,107 +288,44 @@ nohz=off *** Normal Shutdown *** Unscheduled Shutdown ** Appendix A -*** Example ~ntp.conf~ for ~ntpsec~ -Below is an example ~ntp.conf~ file for use with ~ntpsec~. +*** Example ~chrony.conf~ for ~chrony~ +For Raspberry Pi OS, the configuration file should be installed at +~/etc/chrony/chrony.conf~. #+BEGIN_EXAMPLE -# /etc/ntpsec/ntp.conf, configuration for ntpd; see ntp.conf(5) for help - -# Drift file -driftfile /var/lib/ntpsec/ntp.drift - -# Leap seconds definition provided by tzdata -leapfile /usr/share/zoneinfo/leap-seconds.list - -# Log file -#logfile /var/log/ntp.log +# Welcome to the chrony configuration file. See chrony.conf(5) for more +# information about usuable directives. +pool 2.debian.pool.ntp.org iburst +# This directive specify the location of the file containing ID/key pairs for +# NTP authentication. +keyfile /etc/chrony/chrony.keys -# You must create /var/log/ntpsec (owned by ntpsec:ntpsec) to enable logging. -#statsdir /var/log/ntpsec/ -#statistics loopstats peerstats clockstats -#filegen loopstats file loopstats type day enable -#filegen peerstats file peerstats type day enable -#filegen clockstats file clockstats type day enable +# This directive specify the file into which chronyd will store the rate +# information. +driftfile /var/lib/chrony/chrony.drift +# Uncomment the following line to turn logging on. +#log tracking measurements statistics -# Comment this out if you have a refclock and want it to be able to discipline -# the clock by itself (e.g. if the system is not connected to the network). -#tos minclock 4 minsane 3 +# Log files location. +logdir /var/log/chrony +# Stop bad estimates upsetting machine clock. +maxupdateskew 100.0 -# Local time sources +# This directive enables kernel synchronisation (every 11 minutes) of the +# real-time clock. Note that it can’t be used along with the 'rtcfile' directive. +rtcsync -# Kernel PPS (precision seconds; driver 22) -refclock pps unit 0 refid kPPS flag3 1 minpoll 4 maxpoll 4 stratum 1 +# Step the system clock instead of slewing it if the adjustment is larger than +# one second, but only in the first three clock updates. +makestep 1 3 -# GPS PPS reference (precision seconds; driver 28; root) (NTP1) -refclock shm unit 1 refid PPS minpoll 4 maxpoll 4 iburst stratum 1 - -# GPS Serial data reference (coarse time; driver28; root) (NTP0) -refclock shm unit 0 refid GPS prefer time1 0.109 minpoll 4 maxpoll 4 iburst stratum 1 - -# GPS PPS reference (precision seconds; driver 28; user) (NTP2) -refclock shm unit 2 refid PPSuser minpoll 4 maxpoll 4 iburst stratum 1 - -# Tolerate outliers (useful for coarse clocks) -tos mindist 0.500 - - -# Specify one or more NTP servers. - -# pool.ntp.org maps to about 1000 low-stratum NTP servers. Your server will -# pick a different set every time it starts up. Please consider joining the -# pool: -server time.nist.gov iburst -server tick.usno.navy.mil iburst -server 0.us.pool.ntp.org iburst -#server 0.us.pool.ntp.org iburst -#server 0.us.pool.ntp.org iburst -#server 0.us.pool.ntp.org iburst -pool 0.debian.pool.ntp.org iburst -#pool 1.debian.pool.ntp.org iburst -#pool 2.debian.pool.ntp.org iburst -#pool 3.debian.pool.ntp.org iburst - - -# Access control configuration; see /usr/share/doc/ntpsec-doc/html/accopt.html -# for details. -# -# Note that "restrict" applies to both servers and clients, so a configuration -# that might be intended to block requests from certain clients could also end -# up blocking replies from your own upstream servers. - -# By default, exchange time with everybody, but don't allow configuration. -restrict default kod nomodify nopeer noquery limited - -# Local users may interrogate the ntp server more closely. -restrict 127.0.0.1 -restrict ::1 +# Get time from GPS (/dev/ttyAMA0) and PPS (/dev/pps0) +#refclock SOCK /run/chrony.ttyAMA0.sock refid GPS precision 1e-1 offset 0.0000 +#refclock SOCK /run/chrony.pps0.sock refid PP precision 1e-7 +refclock SHM 0 refid GPS precision 1e-1 offset 0.0000 delay 0.2 stratum 1 +refclock SHM 1 refid PPS precision 1e-7 stratum 1 #+END_EXAMPLE -* Discard - -** Transitional ntp to ntpsec config file snippet -# Kernel PPS (precision seconds; driver 22) -#server 127.127.22.0 minpoll 4 maxpoll 4 true -#fudge 127.127.22.0 flag3 1 refid kPPS stratum 1 -refclock pps unit 0 refid kPPS flag3 1 minpoll 4 maxpoll 4 stratum 1 - -# GPS PPS reference (precision seconds; driver 28; root) (NTP1) -#server 127.127.28.1 minpoll 4 maxpoll 4 iburst -#fudge 127.127.28.1 flag1 1 refid PPS -refclock shm unit 1 refid PPS minpoll 4 maxpoll 4 iburst stratum 1 - -# GPS Serial data reference (coarse time; driver28; root) (NTP0) -#server 127.127.28.0 minpoll 4 maxpoll 4 iburst prefer -#fudge 127.127.28.0 flag1 1 time1 0.109 refid GPS stratum 1 -refclock shm unit 0 refid GPS prefer time1 0.109 minpoll 4 maxpoll 4 iburst stratum 1 - -# GPS PPS reference (precision seconds; driver 28; user) (NTP2) -#server 127.127.28.2 minpoll 4 maxpoll 4 iburst -#fudge 127.127.28.2 flag1 1 refid PPSuser stratum 1 -refclock shm unit 2 refid PPSuser minpoll 4 maxpoll 4 iburst stratum 1 - -# Tolerate outliers (useful for coarse clocks) -tos mindist 0.500