doc(setup):Note need to install gpsbabel

[EVA-2020-02.git] / doc / setup / README.org

diff --git a/doc/setup/README.org b/doc/setup/README.org
index 4eb8e2f114f94916adb1de4ae7f633e755aaaca4..7c5b63afcebc2be41a11c28b93b17ca3b0d39ac4 100644 (file)
--- a/doc/setup/README.org
+++ b/doc/setup/README.org
@@ -5,7 +5,7 @@
 ** About
 This document created by [[http://baltakatei.com][Steven Baltakatei Sandoval]] on
 ~2020-10-07T18:39Z~ under a [[http://creativecommons.org/licenses/by-sa/4.0/][CC BY-SA 4.0]] license and last updated on
-~2020-10-07T23:46Z~.
+~2020-10-08T00:50Z~.
 
 This document contains information regarding setup of the
 ninfacyzga-01 hardware common to all operation modes. This includes:
@@ -124,6 +124,13 @@ The version of ~age~ used to perform the encryption
 ** Operating Procedures
 *** Initial Startup
 **** Physical Setup
+The device should be supplied with 5V power and an SD card with the
+latest Raspberry Pi OS image installed. As of 2020-10-07, this will be
+version 10 (e.g. Raspbian Buster 10).
+
+No additional hardware (ex: GPS module, UPS module, thermocouples) is
+required to perform actions described in this document
+
 **** Software Setup
 ***** Install Operating System
 Install Raspberry Pi OS onto an SD card image. See the Raspberry Pi
@@ -190,6 +197,13 @@ Update software with distribution repository.
 : $ sudo apt upgrade -y
 : $ sudo apt dist-upgrade -y
 
+***** Change time zone
+The time zone should be set to "UTC" for simplicity.
+
+: $ sudo raspi-config
+
+Navigate to ~4 Localisation Options~, ~I2 Change Time Zone~, ~None of the above~, ~UTC~.
+
 ***** Update hostname
 A unique hostname is required to uniquely identify the device on the
 network.
@@ -224,6 +238,21 @@ Install ~syncthing~ for log file transfer capability.
 
 : $ sudo apt install syncthing
 
+Enable automatic startup. (See [[https://docs.syncthing.net/users/autostart.html][ref]]).
+
+: $ sudo systemctl enable syncthing@pi.service
+: $ sudo systemctl start syncthing@pi.service
+
+The WebUI of the local instance of syncthing (port 8384) can be
+accessed by running the following command from a separate machine:
+
+: $ ssh -L 127.0.0.1:8390:127.0.0.1:8384 pi@ninfacyzga-1-x
+
+Then, the separate machine should navigate to ~localhost:8390~ in a
+web browser in order to change the ninfacyzga-1 device's
+configuration. The separate machine's Syncthing configuration options
+are accessible via its own web browser via ~localhost:8384~.
+
 ****** ~git~
 ~git~ facilitates downloading files from this repository to the
 device. It may be installed via: