doc(setup):Update README with physical setup

[EVA-2020-02.git] / doc / setup / README.org

diff --git a/doc/setup/README.org b/doc/setup/README.org
index 4eb8e2f114f94916adb1de4ae7f633e755aaaca4..3d40dc20f7817acd49597e46e4cf1c0cc7459d8a 100644 (file)
--- a/doc/setup/README.org
+++ b/doc/setup/README.org
@@ -5,7 +5,7 @@
 ** About
 This document created by [[http://baltakatei.com][Steven Baltakatei Sandoval]] on
 ~2020-10-07T18:39Z~ under a [[http://creativecommons.org/licenses/by-sa/4.0/][CC BY-SA 4.0]] license and last updated on
-~2020-10-07T23:46Z~.
+~2020-10-07T23:53Z~.
 
 This document contains information regarding setup of the
 ninfacyzga-01 hardware common to all operation modes. This includes:
@@ -124,6 +124,13 @@ The version of ~age~ used to perform the encryption
 ** Operating Procedures
 *** Initial Startup
 **** Physical Setup
+The device should be supplied with 5V power and an SD card with the
+latest Raspberry Pi OS image installed. As of 2020-10-07, this will be
+version 10 (e.g. Raspbian Buster 10).
+
+No additional hardware (ex: GPS module, UPS module, thermocouples) is
+required to perform actions described in this document
+
 **** Software Setup
 ***** Install Operating System
 Install Raspberry Pi OS onto an SD card image. See the Raspberry Pi