magicWriteVersion() to be called whenever a new time-stamped ~VERSION~
file needs to be generated and appended to the output tar file
~PATHOUT_TAR~.
-** TODO Rewrite buffer loop to reduce lag between gpspipe runs
+** DONE Rewrite buffer loop to reduce lag between gpspipe runs
+
+ CLOSED: [2020-07-03 Fri 20:57]
2020-07-03T17:10Z; bktei> As is, there is still a 5-6 second lag
between when ~gpspipe~ times out at the end of a buffer round and when
~gpspipe~ is called by the subsequent buffer round. I believe this can
writeBuffer &
done
#+END_EXAMPLE
+2020-07-03T20:56Z; bktei> I simplified it futher to something like
+this:
+#+BEGIN_EXAMPLE
+while( $SECONDS < $SCRIPT_TTL); do
+ writeBuffer &
+ sleep $SCRIPT_TTL
+done
+#+END_EXAMPLE
+
+Raspberry Pi Zero W shows approximately 71ms of drift per buffer round
+with 10s buffer.
+** TODO Feature: Recipient watch folder
+2020-07-03T21:28Z; bktei> This feature would be to scan the contents
+of a specified directory at the start of every buffer round in order
+to determine encryption (age) recipients. This would allow a device to
+dynamically encrypt location data in response to automated changes
+made by other tools. For example, if such a directory were
+synchronized via Syncthing and changes to such a directory were
+managed by a trusted remote server, then that server could respond to
+human requests to secure location data.
+
+Two specific privacy subfeatures come to mind:
+
+1. Parallel encryption: Given a set of ~n~ public keys, encrypt data
+ with a single ~age~ command with options causing all ~n~ pubkeys to
+ be recipients. In order to decrypt the data, any individual private
+ key could be used. No coordination between key owners would be
+ required to decrypt.
+
+2. Sequential encryption: Given a set of ~n~ public keys, encrypt data
+ with ~n~ sequential ~age~ commands all piped in series with each
+ ~age~ command utilizing only one of the ~n~ public keys. In order
+ to decrypt the data, all ~n~ private keys would be required to
+ decrypt the data. Since coordination is required, it is less
+ convenient than parallel encryption.
+
+In either case, a directory would be useful for holding configuration
+files specifying how to execute which or combination of which features
+at the start of every buffer round.
+
+I don't yet know how to program the rules, although I think it'd be
+easier to simply add an option providing ~bkgpslog~ with a directory
+to watch. When examining the directory, check for a file with the
+appropriate file extension (ex: .pubkey) and then read the first line
+into the script's pubKey array.
+
+** TODO Feature: Simplify option to reduce output size
+
+~gpsbabel~ [[https://www.gpsbabel.org/htmldoc-development/filter_simplify.html][features]] a ~simplify~ option to trim data points from GPS
+data. There are several methods for prioritizing which points to keep
+and which to trim, although the following seems useful given some
+sample data I've recorded in a test run of ninfacyzga-01:
+
+#+BEGIN_EXAMPLE
+gpsbabel -i nmea -f all.nmea -x simplify,error=10,relative -o gpx \
+-F all-simp-rel-10.gpx
+#+END_EXAMPLE
+
+An error level of "10" with the "relative" option seems to retain all
+desireable features for GPS data while reducing the number of points
+along straightaways. File size is reduced by a factor of
+about 11. Noise from local stay-in-place drift isn't removed; a
+relative error of about 1000 is required to remove stay-in-place drift
+noise but this also trims all but 100m-size features of the recorded
+path. A relative error of 1000 reduces file size by a factor of
+about 450.
+
+#+BEGIN_EXAMPLE
+ 67M relerror-0.001.kml
+ 66M relerror-0.01.kml
+ 58M relerror-0.1.kml
+ 21M relerror-1.kml
+5.8M relerror-10.kml
+797K relerror-100.kml
+152K relerror-1000.kml
+#+END_EXAMPLE
* bkgpslog narrative
** Initialize environment
projects / EVA-2020-02.git / blobdiff