# Script Metadata
scriptName="bklog"; # Define basename of script file.
-scriptVersion="0.1.8"; # Define version of script.
+scriptVersion="0.1.28"; # Define version of script.
scriptURL="https://gitlab.com/baltakatei/ninfacyzga-01"; # Define wesite hosting this script.
scriptTimeStart="$(date +%Y%m%dT%H%M%S.%N)"; # YYYYmmddTHHMMSS.NNNNNNNNN
scriptHostname=$(hostname); # Save hostname of system running this script.
declare -a buffer # array for storing while read buffer
declare -a argRecPubKeys # array for processArguments function
declare -a recPubKeysValid # array for storing both '-r' and '-R' recipient pubkeys
-declare -a recPubKeysValidStatic # for storing '-r' recipient pubkeys
declare -a argProcStrings argProcFileExts # for storing buffer processing strings (ex: "gpsbabel -i nmea -f - -o gpx -F - ")
declare -Ag appRollCall # Associative array for storing app status
declare -Ag fileRollCall # Associative array for storing file status
processArguments() {
while [ ! $# -eq 0 ]; do # While number of arguments ($#) is not (!) equal to (-eq) zero (0).
case "$1" in
- -v | --verbose) optionVerbose="true"; vbm "DEBUG:Verbose mode enabled.";; # Enable verbose mode.
+ -v | --verbose) optionVerbose="true"; vbm "DEBUG :Verbose mode enabled.";; # Enable verbose mode.
-h | --help) showUsage; exit 1;; # Display usage.
--version) showVersion; exit 1;; # Show version
- -o | --output) if [ -d "$2" ]; then dirOut="$2"; vbm "DEBUG:dirOut:$dirOut"; shift; fi ;; # Define output directory.
- -e | --encrypt) optionEncrypt="true"; vbm "DEBUG:Encrypted output mode enabled.";; # Enable encryption
- -r | --recipient) optionRecipients="true"; argRecPubKeys+=("$2"); vbm "STATUS:pubkey added:""$2"; shift;; # Add recipients
- -c | --compress) optionCompress="true"; vbm "DEBUG:Compressed output mode enabled.";; # Enable compression
+ -o | --output) if [ -d "$2" ]; then dirOut="$2"; vbm "DEBUG :dirOut:$dirOut"; shift; fi ;; # Define output directory.
+ -e | --encrypt) optionEncrypt="true"; vbm "DEBUG :Encrypted output mode enabled.";; # Enable encryption
+ -r | --recipient) optionRecArg="true"; argRecPubKeys+=("$2"); vbm "STATUS:pubkey added:""$2"; shift;; # Add recipients
+ -R | --recipient-dir) optionRecDir="true" && argRecDir="$2"; shift;; # Add recipient watch dir
+ -c | --compress) optionCompress="true"; vbm "DEBUG :Compressed output mode enabled.";; # Enable compression
-z | --time-zone) try setTimeZoneEV "$2"; shift;; # Set timestamp timezone
-t | --temp-dir) optionTmpDir="true" && argTempDirPriority="$2"; shift;; # Set time zone
- -R | --recipient-dir) optionRecipients="true"; optionRecDir="true" && argRecDir="$2"; shift;; # Add recipient watch dir
-b | --buffer-ttl) optionCustomBufferTTL="true" && argCustomBufferTTL="$2"; shift;; # Set custom buffer period (default: 300 seconds)
-B | --script-ttl) optionCustomScriptTTL_TE="true" && argCustomScriptTTL_TE="$2"; shift;; # Set custom script TTL (default: "day")
- -p | --process-string) optionProcString="true" && argProcStrings+=("$2") && argProcFileExts+=("$3") && vbm "STATUS:file extension \"$2\" for output of processing string added:\"$3\""; shift; shift;;
- -l | --label) optionLabel="true" && argLabel="$2"; vbm "DEBUG:Custom label received:$argLabel"; shift;;
- -w | --store-raw) optionStoreRaw="true" && argRawFileExt="$2"; vbm "DEBUG:Raw stdin file extension received:$argRawFileExt"; shift;;
- -W | --no-store-raw) optionNoStoreRaw="true"; vbm "DEBUG:Option selected to not store raw stdin data."; shift;;
+ -p | --process-string) optionProcString="true" && argProcStrings+=("$2") && argProcFileExts+=("$3") && vbm "STATUS:file extension \"$3\" for output of processing string added:\"$2\""; shift; shift;;
+ -l | --label) optionLabel="true" && argLabel="$2"; vbm "DEBUG :Custom label received:$argLabel"; shift;;
+ -w | --store-raw) optionStoreRaw="true" && argRawFileExt="$2"; vbm "DEBUG :Raw stdin file extension received:$argRawFileExt"; shift;;
+ -W | --no-store-raw) optionNoStoreRaw="true"; vbm "DEBUG :Option selected to not store raw stdin data."; shift;;
*) yell "ERROR: Unrecognized argument: $1"; yell "STATUS:All arguments:$*"; exit 1;; # Handle unrecognized options.
esac
shift
} # Argument Processing
vbm() {
# Description: Prints verbose message ("vbm") to stderr if optionVerbose is set to "true".
- # Usage: vbm "DEBUG:verbose message here"
- # Version 0.1.2
+ # Usage: vbm "DEBUG :verbose message here"
+ # Version 0.1.3
# Input: arg1: string
# vars: optionVerbose
# Output: stderr
if [ "$optionVerbose" = "true" ]; then
functionTime=$(date --iso-8601=ns); # Save current time in nano seconds.
- echo "[$functionTime] ""$*" 1>&2; # Display argument text.
+ echo "[$functionTime]:$0:""$*" 1>&2; # Display argument text.
fi
# End function
#==BEGIN Display errors==
#===BEGIN Display Missing Apps===
missingApps="Missing apps :";
- #for key in "${!appRollCall[@]}"; do echo "DEBUG:$key => ${appRollCall[$key]}"; done
+ #for key in "${!appRollCall[@]}"; do echo "DEBUG :$key => ${appRollCall[$key]}"; done
for key in "${!appRollCall[@]}"; do
value="${appRollCall[$key]}";
if [ "$value" = "false" ]; then
- #echo "DEBUG:Missing apps: $key => $value";
+ #echo "DEBUG :Missing apps: $key => $value";
missingApps="$missingApps""$key ";
appMissing="true";
fi;
#===BEGIN Display Missing Files===
missingFiles="Missing files:";
- #for key in "${!fileRollCall[@]}"; do echo "DEBUG:$key => ${fileRollCall[$key]}"; done
+ #for key in "${!fileRollCall[@]}"; do echo "DEBUG :$key => ${fileRollCall[$key]}"; done
for key in "${!fileRollCall[@]}"; do
value="${fileRollCall[$key]}";
if [ "$value" = "false" ]; then
- #echo "DEBUG:Missing files: $key => $value";
+ #echo "DEBUG :Missing files: $key => $value";
missingFiles="$missingFiles""$key ";
fileMissing="true";
fi;
#===BEGIN Display Missing Directories===
missingDirs="Missing dirs:";
- #for key in "${!dirRollCall[@]}"; do echo "DEBUG:$key => ${dirRollCall[$key]}"; done
+ #for key in "${!dirRollCall[@]}"; do echo "DEBUG :$key => ${dirRollCall[$key]}"; done
for key in "${!dirRollCall[@]}"; do
value="${dirRollCall[$key]}";
if [ "$value" = "false" ]; then
- #echo "DEBUG:Missing dirs: $key => $value";
+ #echo "DEBUG :Missing dirs: $key => $value";
missingDirs="$missingDirs""$key ";
dirMissing="true";
fi;
#==END Display errors==
} # Display missing apps, files, dirs
+appendArgTar(){
+ # Desc: Writes first argument to temporary file with arguments as options, then appends file to tar
+ # Usage: appendArgTar "$(echo "Data to be written.")" [name of file to be inserted] [tar path] [temp dir] ([cmd1] [cmd2] [cmd3] [cmd4]...)
+ # Version: 1.0.6
+ # Input: arg1: data to be written
+ # arg2: file name of file to be inserted into tar
+ # arg3: tar archive path (must exist first)
+ # arg4: temporary working dir
+ # arg5+: command strings (ex: "gpsbabel -i nmea -f - -o kml -F - ")
+ # Output: file written to disk
+ # Example: decrypt multiple large files in parallel
+ # appendArgTar "$(cat /tmp/largefile1.gpg)" "largefile1" $HOME/archive.tar /tmp "gpg --decrypt" &
+ # appendArgTar "$(cat /tmp/largefile2.gpg)" "largefile2" $HOME/archive.tar /tmp "gpg --decrypt" &
+ # appendArgTar "$(cat /tmp/largefile3.gpg)" "largefile3" $HOME/archive.tar /tmp "gpg --decrypt" &
+ # Depends: bash 5, tar 1, yell()
+ # Ref/Attrib: Using 'eval' to construct command strings https://askubuntu.com/a/476533
+
+ local fn fileName tarPath tmpDir cmd0 cmd1 cmd2 cmd3 cmd4
+
+ # Save function name
+ fn="${FUNCNAME[0]}";
+ #yell "DEBUG:STATUS:$fn:Finished appendArgTar()."
+
+ # Set file name
+ if ! [ -z "$2" ]; then fileName="$2"; else yell "ERROR:$fn:Not enough arguments."; exit 1; fi
+
+ # Check tar path is a file
+ if [ -f "$3" ]; then tarPath="$3"; else yell "ERROR:$fn:Tar archive arg not a file."; exit 1; fi
+
+ # Check temp dir arg
+ if ! [ -z "$4" ]; then tmpDir="$4"; else yell "ERROR:$fn:No temporary working dir set."; exit 1; fi
+
+ # Set command strings
+ if ! [ -z "$5" ]; then cmd1="$5"; else cmd1="cat "; fi # command string 1
+ if ! [ -z "$6" ]; then cmd2="$6"; else cmd2="cat "; fi # command string 2
+ if ! [ -z "$7" ]; then cmd3="$7"; else cmd3="cat "; fi # command string 3
+ if ! [ -z "$8" ]; then cmd4="$8"; else cmd4="cat "; fi # command string 4
+
+ # Input command
+ cmd0="echo \"\$1\""
+
+ # # Debug
+ # yell "DEBUG:STATUS:$fn:cmd0:$cmd0"
+ # yell "DEBUG:STATUS:$fn:cmd1:$cmd1"
+ # yell "DEBUG:STATUS:$fn:cmd2:$cmd2"
+ # yell "DEBUG:STATUS:$fn:cmd3:$cmd3"
+ # yell "DEBUG:STATUS:$fn:cmd4:$cmd4"
+ # yell "DEBUG:STATUS:$fn:fileName:$fileName"
+ # yell "DEBUG:STATUS:$fn:tarPath:$tarPath"
+ # yell "DEBUG:STATUS:$fn:tmpDir:$tmpDir"
+
+ # Write to temporary working dir
+ eval "$cmd0 | $cmd1 | $cmd2 | $cmd3 | $cmd4" > "$tmpDir"/"$fileName";
+
+ # Append to tar
+ try tar --append --directory="$tmpDir" --file="$tarPath" "$fileName";
+ #yell "DEBUG:STATUS:$fn:Finished appendArgTar()."
+} # Append Bash var to file appended to Tar archive
appendFileTar(){
# Desc: Appends [processed] file to tar
# Usage: appendFileTar [file path] [name of file to be inserted] [tar path] [temp dir] ([process cmd])
# Save function name
fn="${FUNCNAME[0]}";
- #yell "DEBUG:STATUS:$fn:Started appendFileTar()."
+ #yell "DEBUG :STATUS:$fn:Started appendFileTar()."
# Set file name
if ! [ -z "$2" ]; then fileName="$2"; else yell "ERROR:$fn:Not enough arguments."; exit 1; fi
# Append to tar
try tar --append --directory="$tmpDir" --file="$tarPath" "$fileName";
- #yell "DEBUG:STATUS:$fn:Finished appendFileTar()."
+ #yell "DEBUG :STATUS:$fn:Finished appendFileTar()."
} # Append [processed] file to Tar archive
checkAgePubkey() {
# Desc: Checks if string is an age-compatible pubkey
return 1;
fi;
} # Check age pubkey
+checkMakeTar() {
+ # Desc: Checks that a valid tar archive exists, creates one otherwise
+ # Usage: checkMakeTar [ path ]
+ # Version: 1.0.2
+ # Input: arg1: path of tar archive
+ # Output: exit code 0 : tar readable
+ # exit code 1 : tar missing; created
+ # exit code 2 : tar not readable; moved; replaced
+ # Depends: bash 5, date 8, tar 1, try()
+ local pathTar returnFlag0 returnFlag1 returnFlag2
+ pathTar="$1";
+
+ # Check if file is a valid tar archive
+ if tar --list --file="$pathTar" 1>/dev/null 2>&1; then
+ ## T1: return success
+ returnFlag0="tar valid";
+ elif { sleep 2; tar --list --file="$pathTar" 1>/dev/null 2>&1; }; then
+ ## F1: Check tar archive again after 2-second sleep
+ returnFlag0="tar valid";
+ else
+ ## F2-1: Check if file exists
+ if [[ -f "$pathTar" ]]; then
+ ### T: Rename file
+ try mv "$pathTar" "$pathTar""--broken--""$(date +%Y%m%dT%H%M%S%z)" && \
+ returnFlag1="tar moved";
+ else
+ ### F: -
+ :
+ fi;
+ ## F2-1: Create tar archive, return 0
+ try tar --create --file="$pathTar" --files-from=/dev/null && \
+ returnFlag2="tar created";
+ fi;
+
+ # Determine function return code
+ if [[ "$returnFlag0" = "tar valid" ]]; then
+ return 0;
+ elif [[ "$returnFlag2" = "tar created" ]] && ! [[ "$returnFlag1" = "tar moved" ]]; then
+ return 1; # tar missing so created
+ elif [[ "$returnFlag2" = "tar created" ]] && [[ "$returnFlag1" = "tar moved" ]]; then
+ return 2; # tar not readable so moved; replaced
+ fi;
+} # checks if arg1 is tar; creates one otherwise
dateShort(){
# Desc: Date without separators (YYYYmmdd)
# Usage: dateShort ([str date])
dateCurrentShort="$(date -d "$timeInput" +%Y%m%d)"; # Produce separator-less current date with resolution 1 day.
echo "$dateCurrentShort";
} # Get YYYYmmdd
+dateTimeShort(){
+ # Desc: Timestamp without separators (YYYYmmddTHHMMSS+zzzz)
+ # Usage: dateTimeShort ([str date])
+ # Version 1.1.1
+ # Input: arg1: 'date'-parsable timestamp string (optional)
+ # Output: stdout: timestamp (ISO-8601, no separators)
+ # Depends: yell
+ local argTime timeCurrent timeInput timeCurrentShort
+
+ argTime="$1";
+ # Get Current Time
+ timeCurrent="$(date --iso-8601=seconds)" ; # Produce `date`-parsable current timestamp with resolution of 1 second.
+ # Decide to parse current or supplied date
+ ## Check if time argument empty
+ if [[ -z "$argTime" ]]; then
+ ## T: Time argument empty, use current time
+ timeInput="$timeCurrent";
+ else
+ ## F: Time argument exists, validate time
+ if date --date="$argTime" 1>/dev/null 2>&1; then
+ ### T: Time argument is valid; use it
+ timeInput="$argTime";
+ else
+ ### F: Time argument not valid; exit
+ yell "ERROR:Invalid time argument supplied. Exiting."; exit 1;
+ fi
+ fi
+ # Construct and deliver separator-les date string
+ timeCurrentShort="$(date -d "$timeInput" +%Y%m%dT%H%M%S%z)";
+ echo "$timeCurrentShort";
+} # Get YYYYmmddTHHMMSS±zzzz
setTimeZoneEV(){
# Desc: Set time zone environment variable TZ
# Usage: setTimeZoneEV arg1
return 0;
fi
} # Exports TZ environment variable
-showUsage() {
- cat <<'EOF'
- USAGE:
- cmd | bklog [ options ]
-
- OPTIONS:
- -h, --help
- Display help information.
- --version
- Display script version.
- -v, --verbose
- Display debugging info.
- -e, --encrypt
- Encrypt output.
- -r, --recipient [ string pubkey ]
- Specify recipient. May be age or ssh pubkey.
- May be specified multiple times for multiple pubkeys.
- See https://github.com/FiloSottile/age
- -o, --output [ path dir ]
- Specify output directory to save logs. This option is required
- to save log data.
- -p, --process-string [ filter command ] [ output file extension]
- Specify how to create and name a processed version of the stdin.
- For example, if stdin is 'nmea' location data:
-
- -p "gpsbabel -i nmea -f - -o gpx -F - " ".gpx"
-
- This option would cause the stdin to 'bklog' to be piped into
- the 'gpsbabel' command, interpreted as 'nmea' data, converted
- into 'gpx' format, and then appended to the output tar file
- as a file with a '.gpx' extension.
- This option may be specified multiple times in order to output
- results of multiple different processing methods.
- -l, --label [ string ]
- Specify a label to be included in all output file names.
- Ex: 'location' if stdin is location data.
- -w, --store-raw [ file extension ]
- Specify file extension of file within output tar that contains
- raw stdin data. The default behavior is to always save raw stdin
- data in a '.stdin' file. Example usage when 'bklog' receives
- 'nmea' data from 'gpspipe -r':
-
- -w ".nmea"
-
- Stdin data is saved in a '.nmea' file within the output tar.
- -W, --no-store-raw
- Do not store raw stdin in output tar.
- -c, --compress
- Compress output with gzip (before encryption if enabled).
- -z, --time-zone
- Specify time zone. (ex: "America/New_York")
- -t, --temp-dir [path dir]
- Specify parent directory for temporary working directory.
- Default: "/dev/shm"
- -R, --recipient-dir [path dir]
- Specify directory containing files whose first lines are
- to be interpreted as pubkey strings (see '-r' option).
- -b, --buffer-ttl [integer]
- Specify custom buffer period in seconds (default: 300 seconds)
- -B, --script-ttl [time element string]
- Specify custom script time-to-live in seconds (default: "day")
- Valid values: "day", "hour"
-
- EXAMPLE: (bash script lines)
- $ gpspipe -r | /bin/bash bklog -v -e -c -z "UTC" -t "/dev/shm" \
- -r age1mrmfnwhtlprn4jquex0ukmwcm7y2nxlphuzgsgv8ew2k9mewy3rs8u7su5 \
- -r age1ala848kqrvxc88rzaauc6vc5v0fqrvef9dxyk79m0vjea3hagclswu0lgq \
- -R ~/.config/bklog/recipients -w ".nmea" -b 300 -B "day" \
- -o ~/Sync/Logs -l "location" \
- -p "gpsbabel -i nmea -f - -o gpx -F - " ".gpx" \
- -p "gpsbabel -i nmea -f - -o kml -F - " ".kml"
-EOF
-} # Display information on how to use this script.
showVersion() {
yell "$scriptVersion"
} # Display script version.
# Ref/Attrib: ISO-8601:2004(E), §4.4.4.2 Representations of time intervals by duration and context information
# Note: "1 month" ("P1M") is assumed to be "30 days" (see ISO-8601:2004(E), §2.2.1.2)
# Usage: timeDuration [1:seconds] ([2:precision])
- # Version: 1.0.4
+ # Version: 1.0.5
# Input: arg1: seconds as base 10 integer >= 0 (ex: 3601)
# arg2: precision level (optional; default=2)
# Output: stdout: ISO-8601 duration string (ex: "P1H1S", "P2Y10M15DT10H30M20S")
if [[ $fullDays -gt 0 ]]; then hasDays="true"; else hasDays="false"; fi
if [[ $fullHours -gt 0 ]]; then hasHours="true"; else hasHours="false"; fi
if [[ $fullMinutes -gt 0 ]]; then hasMinutes="true"; else hasMinutes="false"; fi
- if [[ $fullSeconds -gt 0 ]]; then hasSeconds="true"; else hasSeconds="false"; fi
+ if [[ $fullSeconds -ge 0 ]]; then hasSeconds="true"; else hasSeconds="false"; fi
## Determine which fields to display (see ISO-8601:2004 §4.4.3.2)
witherPrecision="false"
fi
} # Get duration (ex: PT10M4S )
+timeUntilNextDay(){
+ # Desc: Report seconds until next day.
+ # Version: 1.0.2
+ # Output: stdout: integer seconds until next day
+ # Output: exit code 0 if stdout > 0; 1 if stdout = 0; 2 if stdout < 0
+ # Usage: timeUntilNextDay
+ # Usage: if ! myTTL="$(timeUntilNextDay)"; then yell "ERROR in if statement"; exit 1; fi
+ # Depends: date 8, echo 8, yell, try
+
+ local returnState timeCurrent timeNextDay secondsUntilNextDay returnState
+ timeCurrent="$(date --iso-8601=seconds)" ; # Produce `date`-parsable current timestamp with resolution of 1 second.
+ timeNextDay="$(date -d "$timeCurrent next day" --iso-8601=date)"; # Produce timestamp of beginning of tomorrow with resolution of 1 second.
+ secondsUntilNextDay="$(( $(date +%s -d "$timeNextDay") - $(date +%s -d "$timeCurrent") ))" ; # Calculate seconds until closest future midnight (res. 1 second).
+ if [[ "$secondsUntilNextDay" -gt 0 ]]; then
+ returnState="true";
+ elif [[ "$secondsUntilNextDay" -eq 0 ]]; then
+ returnState="warning_zero";
+ yell "WARNING:Reported time until next day exactly zero.";
+ elif [[ "$secondsUntilNextDay" -lt 0 ]]; then
+ returnState="warning_negative";
+ yell "WARNING:Reported time until next day is negative.";
+ fi
+
+ try echo "$secondsUntilNextDay"; # Report
+
+ # Determine function return code
+ if [[ "$returnState" = "true" ]]; then
+ return 0;
+ elif [[ "$returnState" = "warning_zero" ]]; then
+ return 1;
+ elif [[ "$returnState" = "warning_negative" ]]; then
+ return 2;
+ fi
+} # Report seconds until next day
+timeUntilNextHour(){
+ # Desc: Report seconds until next hour
+ # Version 1.0.1
+ # Output: stdout: integer seconds until next hour
+ # Output: exit code 0 if stdout > 0; 1 if stdout = 0; 2 if stdout < 0
+ # Usage: timeUntilNextHour
+ # Usage: if ! myTTL="$(timeUntilNextHour)"; then yell "ERROR in if statement"; exit 1; fi
+
+ local returnState timeCurrent timeNextHour secondsUntilNextHour
+ timeCurrent="$(date --iso-8601=seconds)"; # Produce `date`-parsable current timestamp with resolution of 1 second.
+ timeNextHour="$(date -d "$timeCurrent next hour" --iso-8601=hours)"; # Produce `date`-parsable current time stamp with resolution of 1 second.
+ secondsUntilNextHour="$(( $(date +%s -d "$timeNextHour") - $(date +%s -d "$timeCurrent") ))"; # Calculate seconds until next hour (res. 1 second).
+ if [[ "$secondsUntilNextHour" -gt 0 ]]; then
+ returnState="true";
+ elif [[ "$secondsUntilNextHour" -eq 0 ]]; then
+ returnState="warning_zero";
+ yell "WARNING:Reported time until next hour exactly zero.";
+ elif [[ "$secondsUntilNextHour" -lt 0 ]]; then
+ returnState="warning_negative";
+ yell "WARNING:Reported time until next hour is negative.";
+ fi;
+
+ try echo "$secondsUntilNextHour"; # Report
+
+ # Determine function return code
+ if [[ "$returnState" = "true" ]]; then
+ return 0;
+ elif [[ "$returnState" = "warning_zero" ]]; then
+ return 1;
+ elif [[ "$returnState" = "warning_negative" ]]; then
+ return 2;
+ fi;
+} # Report seconds until next hour
validateInput() {
# Desc: Validates Input
# Usage: validateInput [str input] [str input type]
# Depends: bash 5.0.3, processArguments(), vbm(), yell()
# Parse '-t' option (user-specified temporary working dir)
## Set dir_tmp_parent to user-specified value if specified
- local dir_tmp_parent
+ local fn dir_tmp_parent
+
+ # Save function name
+ fn="${FUNCNAME[0]}";
+ vbm "STATUS:$fn:Starting magicInitWorkingDir() function.";
if [[ "$optionTmpDir" = "true" ]]; then
if [[ -d "$argTempDirPriority" ]]; then
dir_tmp_parent="$argTempDirPriority";
else
- yell "WARNING:Specified temporary working directory not valid:$argTempDirPriority";
+ yell "WARNING:$fn:Specified temporary working directory not valid:$argTempDirPriority";
exit 1; # Exit since user requires a specific temp dir and it is not available.
fi;
else
if [[ -d "$dirTmpDefault" ]]; then
dir_tmp_parent="$dirTmpDefault";
elif [[ -d /tmp ]]; then
- yell "WARNING:$dirTmpDefault not available. Falling back to /tmp .";
+ yell "WARNING:$fn:$dirTmpDefault not available. Falling back to /tmp .";
dir_tmp_parent="/tmp";
else
- yell "ERROR:No valid working directory available. Exiting.";
+ yell "ERROR:$fn:No valid working directory available. Exiting.";
exit 1;
fi;
fi;
## Set dir_tmp using dir_tmp_parent and nonce (scriptTimeStart)
- dir_tmp="$dir_tmp_parent"/"$scriptTimeStart""..bkgpslog" && vbm "DEBUG:Set dir_tmp to:$dir_tmp"; # Note: removed at end of main().
+ dir_tmp="$dir_tmp_parent"/"$scriptTimeStart""..bkgpslog" && vbm "DEBUG :$fn:Set dir_tmp to:$dir_tmp"; # Note: removed at end of main().
+ vbm "STATUS:$fn:Finished magicInitWorkingDir() function.";
} # Sets working dir
magicInitCheckTar() {
# Desc: Initializes or checks output tar
# input: vars: scriptHostname
# output: vars: pathout_tar
# depends: Bash 5.0.3, vbm(), dateShort(), checkMakeTar(), magicWriteVersion()
+ local fn checkMakeTarES
+ # Save function name
+ fn="${FUNCNAME[0]}";
+
+ vbm "STATUS:$fn:Starting magicInitCheckTar() function.";
# Form pathout_tar
pathout_tar="$dirOut"/"$(dateShort "$(date --date="$bufferTTL seconds ago" --iso-8601=seconds)")".."$scriptHostname""$label""$cmd_compress_suffix""$cmd_encrypt_suffix".tar && \
- vbm "STATUS:Set pathout_tar to:$pathout_tar";
+ vbm "STATUS:$fn:Set pathout_tar to:$pathout_tar";
# Validate pathout_tar as tar.
- checkMakeTar "$pathout_tar";
+ checkMakeTar "$pathout_tar"; checkMakeTarES="$?";
## Add VERSION file if checkMakeTar had to create a tar (exited 1) or replace one (exited 2)
- vbm "exit status before magicWriteVersion:$?"
- if [[ $? -eq 1 ]] || [[ $? -eq 2 ]]; then magicWriteVersion; fi
+ vbm "STATUS:$fn:exit status before magicWriteVersion:$checkMakeTarES"
+ if [[ "$checkMakeTarES" -eq 1 ]] || [[ "$checkMakeTarES" -eq 2 ]]; then magicWriteVersion; fi
+ vbm "STATUS:$fn:Finished magicInitCheckTar() function.";
} # Initialize tar, set pathout_tar
magicParseCompressionArg() {
# Desc: Parses compression arguments specified by '-c' option
# Input: vars: optionCompress
# Output: cmd_compress, cmd_compress_suffix
# Depends: processArguments(), vbm(), checkapp(), gzip 1.9
+ local fn
+
+ # Save function name
+ fn="${FUNCNAME[0]}";
+
+ vbm "STATUS:$fn:Starting magicParseCompressionArg() function.";
if [[ "$optionCompress" = "true" ]]; then # Check if compression option active
if checkapp gzip; then # Check if gzip available
- cmd_compress="gzip " && vbm "cmd_compress:$cmd_compress";
- cmd_compress_suffix=".gz" && vbm "cmd_compress_suffix:$cmd_compress_suffix";
+ cmd_compress="gzip " && vbm "STATUS:$fn:cmd_compress:$cmd_compress";
+ cmd_compress_suffix=".gz" && vbm "STATUS:$fn:cmd_compress_suffix:$cmd_compress_suffix";
else
- yell "ERROR:Compression enabled but \"gzip\" not found. Exiting."; exit 1;
- fi
+ yell "ERROR:$fn:Compression enabled but \"gzip\" not found. Exiting."; exit 1;
+ fi;
else
- cmd_compress="tee /dev/null " && vbm "cmd_compress:$cmd_compress";
- cmd_compress_suffix="" && vbm "cmd_compress_suffix:$cmd_compress_suffix";
- vbm "DEBUG:Compression not enabled.";
- fi
+ cmd_compress="tee /dev/null " && vbm "STATUS:$fn:cmd_compress:$cmd_compress";
+ cmd_compress_suffix="" && vbm "STATUS:$fn:cmd_compress_suffix:$cmd_compress_suffix";
+ vbm "DEBUG :$fn:Compression not enabled.";
+ fi;
+ vbm "STATUS:$fn:Finished magicParseCompressionArg() function.";
} # Form compression cmd string and filename suffix
magicParseCustomTTL() {
# Desc: Set user-specified TTLs for buffer and script
# Input: vars: bufferTTL (integer), scriptTTL_TE (string)
# Output: bufferTTL (integer), scriptTTL_TE (string)
# Depends: Bash 5.0.3, yell(), vbm(), validateInput(), showUsage()
+ local fn
+
+ # Save function name
+ fn="${FUNCNAME[0]}";
+ vbm "STATUS:$fn:Starting magicParseCustomTTL() function.";
# React to '-b, --buffer-ttl' option
if [[ "$optionCustomBufferTTL" = "true" ]]; then
## T: Check if argCustomBufferTTL is an integer
if validateInput "$argCustomBufferTTL" "integer"; then
### T: argCustomBufferTTL is an integer
- bufferTTL="$argCustomBufferTTL" && vbm "Custom bufferTTL from -b:$bufferTTL";
+ bufferTTL="$argCustomBufferTTL" && vbm "STATUS:$fn:Custom bufferTTL from -b:$bufferTTL";
else
### F: argcustomBufferTTL is not an integer
- yell "ERROR:Invalid integer argument for custom buffer time-to-live."; showUsage; exit 1;
+ yell "ERROR:$fn:Invalid integer argument for custom buffer time-to-live."; showUsage; exit 1;
fi;
## F: do not change bufferTTL
fi;
## T: Check if argCustomScriptTTL is a time element (ex: "day", "hour")
if validateInput "$argCustomScriptTTL_TE" "time_element"; then
### T: argCustomScriptTTL is a time element
- scriptTTL_TE="$argCustomScriptTTL_TE" && vbm "Custom scriptTTL_TE from -B:$scriptTTL_TE";
+ scriptTTL_TE="$argCustomScriptTTL_TE" && vbm "STATUS:$fn:Custom scriptTTL_TE from -B:$scriptTTL_TE";
else
### F: argcustomScriptTTL is not a time element
- yell "ERROR:Invalid time element argument for custom script time-to-live."; showUsage; exit 1;
+ yell "ERROR:$fn:Invalid time element argument for custom script time-to-live."; showUsage; exit 1;
fi;
## F: do not change scriptTTL_TE
- fi;
+ fi;
+ vbm "STATUS:$fn:Finished magicParseCustomTTL() function.";
} # Sets custom script or buffer TTL if specified
magicParseLabel() {
# Desc: Parses -l option to set label
# In : optionLabel, argLabel
# Out: vars: label
# Depends: Bash 5.0.3, vbm(), yell()
+ local fn
+
+ # Save function name
+ fn="${FUNCNAME[0]}";
- vbm "STATUS:Started magicParseLabel() function.";
+ vbm "STATUS:$fn:Started magicParseLabel() function.";
# Do nothing if optionLabel not set to true.
if [[ ! "$optionLabel" = "true" ]]; then
- vbm "STATUS:optionlabel not set to 'true'. Returning early.";
+ vbm "STATUS:$fn:optionlabel not set to 'true'. Returning early.";
return;
fi;
# Set label if optionLabel is true
if [[ "$optionLabel" = "true" ]]; then
label="_""$argLabel";
- vbm "STATUS:Set label:$label";
+ vbm "STATUS:$fn:Set label:$label";
fi;
- vbm "STATUS:Finished magicParseLabel() function.";
+ vbm "STATUS:$fn:Finished magicParseLabel() function.";
} # Set label used in output file name
magicParseProcessStrings() {
# Desc: Processes user-supplied process strings into process commands for appendFileTar().
# arry: argProcStrings, argProcFileExts
# Out: arry: procStrings, procFileExts
# Depends Bash 5.0.3, yell(), vbm()
- local rawFileExt
-
- vbm "STATUS:Starting magicParseProcessStrings() function.";
- vbm "var:optionProcString:$optionProcString";
- vbm "var:optionNoStoreRaw:$optionNoStoreRaw";
- vbm "var:optionStoreRaw:$optionStoreRaw";
- vbm "var:argRawFileExt:$argRawFileExt";
- vbm "ary:argProcStrings:${argProcStrings[*]}";
- vbm "ary:argProcFileExts:${argProcFileExts[*]}"
+ local fn rawFileExt
+
+ # Save function name
+ fn="${FUNCNAME[0]}";
+
+ vbm "STATUS:$fn:Starting magicParseProcessStrings() function.";
+ vbm "STATUS:$fn:var:optionProcString:$optionProcString";
+ vbm "STATUS:$fn:var:optionNoStoreRaw:$optionNoStoreRaw";
+ vbm "STATUS:$fn:var:optionStoreRaw:$optionStoreRaw";
+ vbm "STATUS:$fn:var:argRawFileExt:$argRawFileExt";
+ vbm "STATUS:$fn:ary:argProcStrings:${argProcStrings[*]}";
+ vbm "STATUS:$fn:ary:argProcFileExts:${argProcFileExts[*]}"
# Validate input
## Validate argRawFileExt
if [[ "$argRawFileExt" =~ ^[.][[:alnum:]]*$ ]]; then
- rawFileExt="$argRawFileExt";
+ rawFileExt="$argRawFileExt" && \
+ vbm "DEBUG :$fn:Set rawFileExt to \"$argRawFileExt\"";
+ else
+ vbm "DEBUG :$fn:Validation failure for $argRawFileExt . Not set to rawFileExt.";
fi;
# Add default stdin output file entries for procStrings, procFileExts
## Check if user specified that no raw stdin be saved.
if [[ ! "$optionNoStoreRaw" = "true" ]]; then
### T: --no-store-raw not set. Store raw. Append procStrings with cat.
+ vbm "DEBUG :$fn:--no-store-raw not set. Storing raw.";
#### Append procStrings array
- procStrings+=("cat ");
+ procStrings+=("cat ") && \
+ vbm "DEBUG :$fn:Appended \"cat \" to procStrings";
+ vbm "DEBUG :$fn:procStrings array:${procStrings[*]}";
#### Check if --store-raw set.
if [[ "$optionStoreRaw" = "true" ]]; then
##### T: --store-raw set. Append procFileExts with user-specified file ext
- procFileExts+=("$rawFileExt");
+ vbm "DEBUG :$fn:--store-raw set.";
+ procFileExts+=("$rawFileExt") && \
+ vbm "DEBUG :$fn:Appended $rawFileExt to procFileExts";
+ vbm "STATUS:$fn:procFileExts array:${procFileExts[*]}";
else
##### F: --store-raw not set. Append procFileExts with default ".stdin" file ext
###### Append procFileExts array
- procFileExts+=(".stdin");
+ procFileExts+=(".stdin") && \
+ vbm "DEBUG :$fn:Appended \".stdin\" to procFileExts";
+ vbm "STATUS:$fn:procFileExts array:${procFileExts[*]}";
fi;
else
### F: --no-store-raw set. Do not store raw.
#### Do not append procStrings or procFileExts arrays.
- :
+ vbm "STATUS:$fn:--no-store-raw set. Not storing raw.";
+ vbm "STATUS:$fn:procFileExts array:${procFileExts[*]}";
fi;
# Do nothing more if optionProcString not set to true.
if [[ ! "$optionProcString" = "true" ]]; then
- vbm "STATUS:optionProcString not set to 'true'. Returning early.";
+ vbm "STATUS:$fn:optionProcString not set to 'true'. Returning early.";
return; fi;
# Validate input array indices
## Make sure that argProcStrings and argProcFileExts have same index counts
if ! [[ "${#argProcStrings[@]}" -eq "${#argProcFileExts[@]}" ]]; then
- yell "ERROR:Mismatch in number of elements in arrays argProcStrings and argProcFileExts:${#argProcStrings[@]} DNE ${#argProcFileExts[@]}";
- yell "argProcStrings:${argProcStrings[*]}"; yell "argProcFileExts:${argProcFileExts[*]}"; exit 1; fi;
+ yell "ERROR:$fn:Mismatch in number of elements in arrays argProcStrings and argProcFileExts:${#argProcStrings[@]} DNE ${#argProcFileExts[@]}";
+ yell "STATUS:$fn:argProcStrings:${argProcStrings[*]}"; yell "STATUS:$fn:argProcFileExts:${argProcFileExts[*]}"; exit 1; fi;
## Make sure that no array elements are blank
for element in "${argProcStrings[@]}"; do
- if [[ -z "$element" ]]; then yell "ERROR:Empty process string specified. Exiting."; exit 1; fi; done
+ if [[ -z "$element" ]]; then yell "ERROR:$fn:Empty process string specified. Exiting."; exit 1; fi; done
for element in "${argProcFileExts[@]}"; do
- if [[ -z "$element" ]]; then yell "ERROR:Empty output file extension specified. Exiting."; exit 1; fi; done
+ if [[ -z "$element" ]]; then yell "ERROR:$fn:Empty output file extension specified. Exiting."; exit 1; fi; done
## Make sure that no process string starts with '-' (ex: if only one arg supplied after '-p' option)
for element in "${argProcStrings[@]}"; do
- if [[ ! "$element" =~ ^[-][[:print:]]*$ ]] && [[ "$element" =~ ^[[:print:]]*$ ]]; then
- yell "ERROR:Illegal character '-' at start of process string element:\"$element\"";
+ if [[ "$element" =~ ^[-][[:print:]]*$ ]] && [[ ! "$element" =~ ^[[:print:]]*$ ]]; then
+ yell "ERROR:$fn:Illegal character '-' at start of process string element:\"$element\"";
exit 1; fi; done;
- vbm "STATUS:Quick check shows argProcStrings and argProcFileExts appear to have valid contents.";
- procStrings=("${argProcStrings[@]}"); # Export process command strings
- procFileExts=("${argProcFileExts[@]}"); # Export process command strings
- vbm "STATUS:Finished magicParseProcessStrings() function.";
+ vbm "STATUS:$fn:Quick check shows argProcStrings and argProcFileExts appear to have valid contents.";
+ vbm "STATUS:$fn:argProcStrings:${argProcStrings[*]}"
+ vbm "STATUS:$fn:argProcFileExts:${argProcFileExts[*]}"
+ procStrings+=("${argProcStrings[@]}"); # Export process command strings
+ procFileExts+=("${argProcFileExts[@]}"); # Export process command strings
+ vbm "STATUS:$fn:procStrings:${procStrings[*]}"
+ vbm "STATUS:$fn:procFileExts:${procFileExts[*]}"
+ vbm "STATUS:$fn:Finished magicParseProcessStrings() function.";
} # Validate and save process strings and file extensions to arrays procStrings, procFileExts
-magicParseRecipientArgs() {
- # Desc: Parses recipient arguments specified by '-r' option
- # Input: vars: optionEncrypt, optionRecipients
- # arry: argRecPubKeys from processArguments()
- # Output: vars: cmd_encrypt, cmd_encrypt_suffix
- # arry: recPubKeysValid, recPubKeysValidStatic
- # Depends: processArguments(), yell(), vbm(), checkapp(), checkAgePubkey(), validateInput()
- local recipients
-
- # Check if encryption option active.
- if [[ "$optionEncrypt" = "true" ]] && [[ "$optionRecipients" = "true" ]]; then
- if checkapp age; then # Check that age is available.
- for pubkey in "${argRecPubKeys[@]}"; do # Validate recipient pubkey strings by forming test message
- vbm "DEBUG:Testing pubkey string:$pubkey";
- if checkAgePubkey "$pubkey" && \
- ( validateInput "$pubkey" "ssh_pubkey" || validateInput "$pubkey" "age_pubkey"); then
- #### Form age recipient string
- recipients="$recipients""-r '$pubkey' ";
- vbm "STATUS:Added pubkey for forming age recipient string:""$pubkey";
- vbm "DEBUG:recipients:""$recipients";
- #### Add validated pubkey to recPubKeysValid array
- recPubKeysValid+=("$pubkey") && vbm "DEBUG:recPubkeysValid:pubkey added:$pubkey";
- else
- yell "ERROR:Exit code ""$?"". Invalid recipient pubkey string. Exiting."; exit 1;
- fi;
- done
- vbm "DEBUG:Finished processing argRecPubKeys array";
- vbm "STATUS:Array of validated pubkeys:${recPubKeysValid[*]}";
- recPubKeysValidStatic=("${recPubKeysValid[@]}"); # Save static image of pubkeys validated by this function
+magicParseRecipients() {
+ # Desc: Parses recipient arguments specified by '-r' or '-R' options
+ # Usage: magicParseRecipients
+ # In : vars: optionEncrypt, optionRecArg, optionRecDir
+ # arry: argRecPubKeys (-r), argRecDir (-R)
+ # Out: vars: cmd_encrypt, cmd_encrypt_suffix
+ # Depends: head 8.30, checkapp(), checkAgePubkey(), validateInput()
+ local fn recipients recipientDir recFileLine updateRecipients
+ local -a recPubKeysValid candRecPubKeysValid
- ## Form age command string
- cmd_encrypt="age ""$recipients " && vbm "cmd_encrypt:$cmd_encrypt";
- cmd_encrypt_suffix=".age" && vbm "cmd_encrypt_suffix:$cmd_encrypt_suffix";
- else
- yell "ERROR:Encryption enabled but \"age\" not found. Exiting."; exit 1;
- fi;
- else
- cmd_encrypt="tee /dev/null " && vbm "cmd_encrypt:$cmd_encrypt";
- cmd_encrypt_suffix="" && vbm "cmd_encrypt_suffix:$cmd_encrypt_suffix";
- vbm "DEBUG:Encryption not enabled."
+ # Save function name
+ fn="${FUNCNAME[0]}";
+ vbm "STATUS:$fn:Starting magicParseRecipients() function.";
+
+ # Catch illegal option combinations
+ ## Catch case if '-e' is set but neither '-r' nor '-R' is set
+ if [[ "$optionEncrypt" = "true" ]] && \
+ ! { [[ "$optionRecArg" = "true" ]] || [[ "$optionRecDir" = "true" ]]; }; then
+ yell "ERROR:$fn:\\'-e\\' set but no \\'-r\\' or \\'-R\\' set."; exit 1; fi;
+ ## Catch case if '-r' or '-R' set but '-e' is not
+ if [[ ! "$optionEncrypt" = "true" ]] && \
+ { [[ "$optionRecArg" = "true" ]] || [[ "$optionRecDir" = "true" ]]; }; then
+ yell "ERROR:$fn:\\'-r\\' or \\'-R\\' set but \\'-e\\' is not set."; exit 1; fi;
+
+ # Handle no encryption cases
+ if [[ ! "$optionEncrypt" = "true" ]]; then
+ cmd_encrypt="cat " && vbm "STATUS:$fn:cmd_encrypt:$cmd_encrypt";
+ cmd_encrypt_suffix="" && vbm "STATUS:$fn:cmd_encrypt_suffix:$cmd_encrypt_suffix";
+ vbm "DEBUG :$fn:Encryption not enabled.";
+ return; fi;
+
+ # Handle encryption cases
+ ## Check age availability
+ if ! checkapp age; then yell "ERROR:$fn:age not available. Exiting."; exit 1; fi
+ ## Parse '-r' options: validate and append pubkeys from argRecPubKeys to recPubKeysValid
+ if [[ "$optionRecArg" = "true" ]]; then
+ for pubkey in "${argRecPubKeys[@]}"; do # Validate recipient pubkey strings by forming test message
+ vbm "DEBUG :$fn:Testing pubkey string:$pubkey";
+ if checkAgePubkey "$pubkey" && \
+ ( validateInput "$pubkey" "ssh_pubkey" || validateInput "$pubkey" "age_pubkey"); then
+ #### Add validated pubkey to recPubKeysValid array
+ recPubKeysValid+=("$pubkey") && \
+ vbm "DEBUG :$fn:recPubkeysValid:pubkey added:$pubkey";
+ else
+ yell "ERROR:$fn:Exit code ""$?"". Invalid recipient pubkey string. Exiting."; exit 1;
+ fi;
+ done;
+ vbm "STATUS:$fn:Finished processing argRecPubKeys array";
+ vbm "DEBUG :$fn:Array of validated pubkeys:${recPubKeysValid[*]}";
fi;
- # Catch case if '-e' is set but '-r' or '-R' is not
- if [[ "$optionEncrypt" = "true" ]] && [[ ! "$optionRecipients" = "true" ]]; then
- yell "ERROR:\\'-e\\' set but no \\'-r\\' or \\'-R\\' set."; exit 1; fi;
- # Catch case if '-r' or '-R' set but '-e' is not
- if [[ ! "$optionEncrypt" = "true" ]] && [[ "$optionRecipients" = "true" ]]; then
- yell "ERROR:\\'-r\\' or \\'-R\\' set but \\'-e\\' is not set."; exit 1; fi;
-} # Populate recPubKeysValid with argRecPubKeys; form encryption cmd string and filename suffix
-magicParseRecipientDir() {
- # Desc: Updates recPubKeysValid with pubkeys in dir specified by '-R' option ("recipient directory")
- # Inputs: vars: optionEncrypt, optionRecDir, argRecDir,
- # arry: recPubKeysValid
- # Outputs: arry: recPubKeysValid
- # Depends: processArguments(), yell(), vbm(), validateInput(), checkAgePubkey()
- local recipientDir recFileLine updateRecipients
- declare -a candRecPubKeysValid
-
- # Check that '-e' and '-R' set
- if [[ "$optionEncrypt" = "true" ]] && [[ "$optionRecDir" = "true" ]]; then
- ### Check that argRecDir is a directory.
+ ## Parse '-R' options: validate and append pubkeys in argRecDir to recPubKeysValid
+ if [[ "$optionRecDir" = "true" ]]; then
+ ### Check that argRecDir is a directory
if [[ -d "$argRecDir" ]]; then
- recipientDir="$argRecDir" && vbm "STATUS:Recipient watch directory detected:\"$recipientDir\"";
+ recipientDir="$argRecDir" && \
+ vbm "STATUS:$fn:Recipient watch directory detected:\"$recipientDir\"";
#### Initialize variable indicating outcome of pubkey review
unset updateRecipients
- #### Add existing recipients
- candRecPubKeysValid=("${recPubKeysValidStatic[@]}");
+ #### Add existing recipients from '-r' option
+ candRecPubKeysValid=("${recPubKeysValid[@]}");
#### Parse files in recipientDir
for file in "$recipientDir"/*; do
##### Read first line of each file
- recFileLine="$(head -n1 "$file")" && vbm "STATUS:Checking if pubkey:\"$recFileLine\"";
+ recFileLine="$(head -n1 "$file")" && \
+ vbm "STATUS:$fn:Checking if pubkey:\"$recFileLine\"";
##### check if first line is a valid pubkey
if checkAgePubkey "$recFileLine" && \
( validateInput "$recFileLine" "ssh_pubkey" || validateInput "$recFileLine" "age_pubkey"); then
###### T: add candidate pubkey to candRecPubKeysValid
- candRecPubKeysValid+=("$recFileLine") && vbm "STATUS:RecDir pubkey is valid pubkey:\"$recFileLine\"";
+ candRecPubKeysValid+=("$recFileLine") && \
+ vbm "STATUS:$fn:RecDir pubkey is valid pubkey:\"$recFileLine\"";
else
###### F: throw warning;
- yell "ERROR:Invalid recipient file detected. Not modifying recipient list."
+ yell "ERROR:$fn:Invalid recipient file detected. Not modifying recipient list:$recFileLine";
updateRecipients="false";
fi;
done
- #### Write updated recPubKeysValid array to recPubKeysValid if no failure detected
+ #### Write candRecPubKeysValid array to recPubKeysValid if no invalid key detected
if ! [[ "$updateRecipients" = "false" ]]; then
- recPubKeysValid=("${candRecPubKeysValid[@]}") && vbm "STATUS:Wrote candRecPubkeysValid to recPubKeysValid:\"${recPubKeysValid[*]}\"";
+ recPubKeysValid=("${candRecPubKeysValid[@]}") && \
+ vbm "STATUS:$fn:Wrote candRecPubkeysValid to recPubKeysValid:\"${recPubKeysValid[*]}\"";
fi;
- else
- yell "ERROR:$0:Recipient directory $argRecDir does not exist. Exiting."; exit 1;
fi;
fi;
- # Handle case if '-R' set but '-e' not set
- if [[ ! "$optionEncrypt" = "true" ]] && [[ "$optionRecDir" = "true" ]]; then
- yell "ERROR: \\'-R\\' is set but \\'-e\\' is not set."; fi;
-} # Update recPubKeysValid with argRecDir
+
+ ## Form age recipient string from recPubKeysValid
+ for pubkey in "${recPubKeysValid[@]}"; do
+ recipients="$recipients""-r '$pubkey' ";
+ vbm "STATUS:$fn:Added pubkey for forming age recipient string:""$pubkey";
+ vbm "DEBUG :$fn:recipients:""$recipients";
+ done;
+
+ ## Output cmd_encrypt, cmd_encrypt_suffix from recipients
+ cmd_encrypt="age ""$recipients " && vbm "STATUS:$fn:cmd_encrypt:$cmd_encrypt";
+ cmd_encrypt_suffix=".age" && vbm "STATUS:$fn:cmd_encrypt_suffix:$cmd_encrypt_suffix";
+
+ vbm "STATUS:$fn:Finished magicParseRecipients() function.";
+} # Sets cmd_encrypt, cmd_encrypt_suffix from -r, -R args
magicSetScriptTTL() {
#Desc: Sets script_TTL seconds from provided time_element string argument
#Usage: magicSetScriptTTL [str time_element]
#Input: arg1: string (Ex: scriptTTL_TE; "day" or "hour")
#Output: var: scriptTTL (integer seconds)
#Depends: timeUntilNextHour, timeUntilNextDay
- local argTimeElement
+ local fn argTimeElement
+
+ # Save function name
+ fn="${FUNCNAME[0]}";
+ vbm "STATUS:$fn:Starting magicSetScriptTTL() function.";
argTimeElement="$1";
if [[ "$argTimeElement" = "day" ]]; then
- # Set script lifespan to end at start of next day
+ # Set script lifespan to end at start of next day
+ vbm "STATUS:$fn:Setting script lifespan to end at start of next day. argTimeElement:$argTimeElement";
if ! scriptTTL="$(timeUntilNextDay)"; then # sets scriptTTL, then checks exit code
if [[ "$scriptTTL" -eq 0 ]]; then
- ((scriptTTL++)); # Add 1 because 0 would cause 'timeout' to never timeout.
+ ((scriptTTL++)); # Add 1 because 0 would cause 'timeout' to never timeout.
+ vbm "STATUS:$fn:scriptTTL:$scriptTTL";
else
- yell "ERROR: timeUntilNextDay exit code $?"; exit 1;
+ yell "ERROR:$fn:timeUntilNextDay exit code $?"; exit 1;
fi;
fi;
elif [[ "$argTimeElement" = "hour" ]]; then
# Set script lifespan to end at start of next hour
+ vbm "STATUS:$fn:Setting script lifespan to end at start of next hour. argTimeElement:$argTimeElement";
if ! scriptTTL="$(timeUntilNextHour)"; then # sets scriptTTL, then checks exit code
if [[ "$scriptTTL" -eq 0 ]]; then
((scriptTTL++)); # Add 1 because 0 would cause 'timeout' to never timeout.
+ vbm "STATUS:$fn:scriptTTL:$scriptTTL";
else
- yell "ERROR: timeUntilNextHour exit code $?"; exit 1;
+ yell "ERROR:$fn:timeUntilNextHour exit code $?"; exit 1;
fi;
fi;
else
- yell "ERROR:Invalid argument for setScriptTTL function:$argTimeElement"; exit 1;
+ yell "ERROR:$fn:Invalid argument for setScriptTTL function:$argTimeElement"; exit 1;
fi;
+ vbm "STATUS:$fn:Finished magicSetScriptTTL() function.";
} # Set scriptTTL in seconds until next (day|hour).
magicWriteVersion() {
# Desc: Appends time-stamped VERSION to pathout_tar
# Input: array: recPubKeysValid
# Output: appends tar (pathout_tar)
# Depends: bash 5.0.3, dateTimeShort(), appendArgTar()
- local fileoutVersion contentVersion pubKeyIndex pubKeyIndex
+ local fn fileoutVersion contentVersion pubKeyIndex pubKeyIndex
+
+ # Save function name
+ fn="${FUNCNAME[0]}";
+ vbm "STATUS:$fn:Starting magicWriteVersion() function.";
# Set VERSION file name
fileoutVersion="$(dateTimeShort)..VERSION";
contentVersion="$(echo -e "$contentVersion")"
# Write contentVersion as file fileoutVersion and write-append to pathout_tar
- appendArgTar "$contentVersion" "$fileoutVersion" "$pathout_tar" "$dir_tmp";
+ appendArgTar "$contentVersion" "$fileoutVersion" "$pathout_tar" "$dir_tmp" && \
+ vbm "STATUS:$fn:Appended $fileoutVersion to $pathout_tar";
+ vbm "STATUS:$fn:Finished magicWriteVersion() function.";
} # write version data to pathout_tar via appendArgTar()
magicProcessWriteBuffer() {
# Desc: process and write buffer
- # In : vars: bufferTTL bufferTTL_STR scriptHostname label dir_tmp SECONDS
+ # In : vars: bufferTTL scriptHostname label dir_tmp SECONDS
+ # : vars: timeBufferStartEpoch timeBufferEndEpoch
# : arry: buffer
# Out: file:(pathout_tar)
# Depends: Bash 5.0.3, date 8.30, yell(), vbm(), dateTimeShort(),
### Note: These arrays should all have the same number of elements:
### pathouts, fileouts, procFileExts, procStrings
- local fn timeBufferStartLong timeBufferStart fileoutBasename
+ local fn timeBufferStartLong timeBufferStart bufferDuration bufferDurationStr fileoutBasename
local -a fileouts pathouts
local writeCmd1 writeCmd2 writeCmd3 writeCmd4
- vbm "DEBUG:STATUS:$fn:Started magicProcessWriteBuffer().";
# Debug:Get function name
fn="${FUNCNAME[0]}";
-
+
+ vbm "STATUS:$fn:Started magicProcessWriteBuffer().";
+ vbm "DEBUG :$fn:buffer array element count:${#buffer[@]}";
+ vbm "DEBUG :$fn:buffer array first element:${buffer[0]}";
+ vbm "DEBUG :$fn:buffer array last element :${buffer[-1]}";
+
# Determine file paths (time is start of buffer period)
## Calculate start time
- timeBufferStartLong="$(date --date="$bufferTTL seconds ago" --iso-8601=seconds)" && \
- vbm "timeBufferStartLong:$timeBufferStartLong";
+ timeBufferStartLong="$(date --date="@$timeBufferStartEpoch" --iso-8601=seconds)" && \
+ vbm "DEBUG :$fn:timeBufferStartLong:$timeBufferStartLong"; # Note start time in 'date' parsable ISO-8601
timeBufferStart="$(dateTimeShort "$timeBufferStartLong" )" && \
- vbm "timeBufferStart:$timeBufferStart"; # Note start time YYYYmmddTHHMMSS+zzzz (no separators)
+ vbm "DEBUG :$fn:timeBufferStart:$timeBufferStart"; # Note start time YYYYmmddTHHMMSS+zzzz (no separators)
+ ## Calculate buffer duration string (ISO-8601 duration)
+ bufferDuration="$((timeBufferEndEpoch - timeBufferStartEpoch))" && \
+ vbm "DEBUG :$fn:bufferDuration:$bufferDuration"; # length of time (seconds) stdin was read
+ bufferDurationStr="$(timeDuration "$bufferDuration")" && \
+ vbm "DEBUG :$fn:bufferDurationStr:$bufferDurationStr"; # buffer duration (ISO-8601)
## Set common basename
- fileoutBasename="$timeBufferStart""--""$bufferTTL_STR""..""$scriptHostname""$label" && \
- vbm "STATUS:Set fileoutBasename to:$fileoutBasename";
+ fileoutBasename="$timeBufferStart""--""$bufferDurationStr""..""$scriptHostname""$label" && \
+ vbm "STATUS:$fn:Set fileoutBasename to:$fileoutBasename";
## Determine output file name array
### in: fileOutBasename cmd_compress_suffix cmd_encrypt_suffix procFileExts
for fileExt in "${procFileExts[@]}"; do
fileouts+=("$fileoutBasename""$fileExt""$cmd_compress_suffix""$cmd_encrypt_suffix") && \
- vbm "STATUS:Added $fileExt to fileouts:${fileouts[*]}";
+ vbm "STATUS:$fn:Added $fileExt to fileouts:${fileouts[*]}";
done;
for fileName in "${fileouts[@]}"; do
pathouts+=("$dir_tmp"/"$fileName") && \
- vbm "STATUS:Added $fileName to pathouts:${pathouts[*]}";
+ vbm "STATUS:$fn:Added $fileName to pathouts:${pathouts[*]}";
done;
## Update pathout_tar
magicInitCheckTar;
writeCmd4="$cmd_encrypt";
## Process buffer and write to dir_tmp
+ vbm "DEBUG :$fn:fileouts element count:${#fileouts[@]}";
+ vbm "DEBUG :$fn:pathouts element count:${#pathouts[@]}";
+ vbm "DEBUG :$fn:procStrings element count:${#pathouts[@]}";
+ vbm "DEBUG :$fn:fileouts contents:${fileouts[*]}";
+ vbm "DEBUG :$fn:pathouts contents:${pathouts[*]}";
+ vbm "DEBUG :$fn:procStrings contents:${pathouts[*]}";
for index in "${!pathouts[@]}"; do
- writeCmd2="${procStrings[$index]}"
- eval "$writeCmd1 | $writeCmd2 | $writeCmd3 | $writeCmd4" >> "${pathouts[$index]}";
+ writeCmd2="${procStrings[$index]}";
+ writeCmdAll="$writeCmd1 | $writeCmd2 | $writeCmd3 | $writeCmd4" && vbm "STATUS:$fn:Assembled command:\"$writeCmdAll\"";
+ eval "$writeCmd1 | $writeCmd2 | $writeCmd3 | $writeCmd4" > "${pathouts[$index]}" && vbm "STATUS:$fn:Wrote command output to ${pathouts[$index]}";
done;
# Append dir_tmp files to pathout_tar
wait; # Wait to avoid collision with older magicProcessWriteBuffer() instances (see https://www.tldp.org/LDP/abs/html/x9644.html )
for index in "${!pathouts[@]}"; do
- appendFileTar "${pathouts[$index]}" "${fileouts[$index]}" "$pathout_tar" "$dir_tmp";
+ tar --append --directory="$dir_tmp" --file="$pathout_tar" "${fileouts[$index]}" && \
+ vbm "STATUS:$fn:Appended ${pathouts[$index]} to $pathout_tar";
+ #appendFileTar "${pathouts[$index]}" "${fileouts[$index]}" "$pathout_tar" "$dir_tmp" && \
done;
# Remove secured chunks from dir_tmp
for path in "${pathouts[@]}"; do
- rm "$path";
+ rm "$path" && vbm "STATUS:$fn:Removed:$path";
done;
- vbm "DEBUG:STATUS:$fn:Finished magicProcessWriteBuffer().";
+ vbm "STATUS:$fn:Finished magicProcessWriteBuffer().";
} # Process and Write buffer
+showUsage() {
+ cat <<'EOF'
+ USAGE:
+ cmd | bklog [ options ]
+
+ OPTIONS:
+ -h, --help
+ Display help information.
+ --version
+ Display script version.
+ -v, --verbose
+ Display debugging info.
+ -e, --encrypt
+ Encrypt output.
+ -r, --recipient [ string pubkey ]
+ Specify recipient. May be age or ssh pubkey.
+ May be specified multiple times for multiple pubkeys.
+ See https://github.com/FiloSottile/age
+ -o, --output [ path dir ]
+ Specify output directory to save logs. This option is required
+ to save log data.
+ -p, --process-string [ filter command ] [ output file extension]
+ Specify how to create and name a processed version of the stdin.
+ For example, if stdin is 'nmea' location data:
+
+ -p "gpsbabel -i nmea -f - -o gpx -F - " ".gpx"
+
+ This option would cause the stdin to 'bklog' to be piped into
+ the 'gpsbabel' command, interpreted as 'nmea' data, converted
+ into 'gpx' format, and then appended to the output tar file
+ as a file with a '.gpx' extension.
+ This option may be specified multiple times in order to output
+ results of multiple different processing methods.
+ -l, --label [ string ]
+ Specify a label to be included in all output file names.
+ Ex: 'location' if stdin is location data.
+ -w, --store-raw [ file extension ]
+ Specify file extension of file within output tar that contains
+ raw stdin data. The default behavior is to always save raw stdin
+ data in a '.stdin' file. Example usage when 'bklog' receives
+ 'nmea' data from 'gpspipe -r':
+
+ -w ".nmea"
+
+ Stdin data is saved in a '.nmea' file within the output tar.
+ -W, --no-store-raw
+ Do not store raw stdin in output tar.
+ -c, --compress
+ Compress output with gzip (before encryption if enabled).
+ -z, --time-zone
+ Specify time zone. (ex: "America/New_York")
+ -t, --temp-dir [path dir]
+ Specify parent directory for temporary working directory.
+ Default: "/dev/shm"
+ -R, --recipient-dir [path dir]
+ Specify directory containing files whose first lines are
+ to be interpreted as pubkey strings (see '-r' option). Only
+ one directory may be specified.
+ -b, --buffer-ttl [integer]
+ Specify custom buffer period in seconds (default: 300 seconds)
+ -B, --script-ttl [time element string]
+ Specify custom script time-to-live in seconds (default: "day")
+ Valid values: "day", "hour"
+
+ EXAMPLE: (bash script lines)
+ $ gpspipe -r | /bin/bash bklog -v -e -c -z "UTC" -t "/dev/shm" \
+ -r age1mrmfnwhtlprn4jquex0ukmwcm7y2nxlphuzgsgv8ew2k9mewy3rs8u7su5 \
+ -r age1ala848kqrvxc88rzaauc6vc5v0fqrvef9dxyk79m0vjea3hagclswu0lgq \
+ -R ~/.config/bklog/recipients -w ".nmea" -b 300 -B "day" \
+ -o ~/Sync/Logs -l "location" \
+ -p "gpsbabel -i nmea -f - -o gpx -F - " ".gpx" \
+ -p "gpsbabel -i nmea -f - -o kml -F - " ".kml"
+EOF
+} # Display information on how to use this script.
main() {
+ # Desc: Main function
+ # Usage: main "$@"
+ # Inputs: many
+ # Outputs: file (pathout_tar)
+ # Depends: many
+ local fn
+
+ # Debug:Get function name
+ fn="${FUNCNAME[0]}";
+
+ vbm "STATUS:$fn:Started function main().";
# Process arguments
processArguments "$@";
## Determine working directory
magicInitWorkingDir; # Sets dir_tmp from argTempDirPriority
## Set output encryption and compression option strings
- ### React to "-e" and "-r" ("encryption recipients") options
- magicParseRecipientArgs; # Updates recPubKeysValid, cmd_encrypt[_suffix] from argRecPubKeys
- ### React to "-R" ("recipient directory") option
- magicParseRecipientDir; # Updates recPubKeysValid
+ ### React to "-e", "-r", and "-R" (encryption recipients) options
+ magicParseRecipients; # Update cmd_encrypt, cmd_encrypt_suffix
### React to "-c" ("compression") option
magicParseCompressionArg; # Updates cmd_compress[_suffix]
## React to "-b" and "-B" (custom buffer and script TTL) options
magicParseProcessStrings; # Sets arrays: procStrings, procFileExts
## React to "-l" (output file label) option
magicParseLabel; # sets label (ex: "_location")
- ## React to "-w" (how to name raw stdin file) option
- magicParseStoreRaw; # sets raw_suffix
# Perform secondary setup operations
## Set script lifespan (scriptTTL from scriptTTL_TE)
magicSetScriptTTL "$scriptTTL_TE";
- ## File name substring (ISO-8601 duration from bufferTTL)
- bufferTTL_STR="$(timeDuration "$bufferTTL")" && vbm "DEBUG:bufferTTL_STR:$bufferTTL_STR";
+ ## Adjust SECONDS so buffer rounds align with time elements
+ ### Advance SECONDS the remainder seconds for dividend timeUntilNextDay, divisor bufferTTL
+ if [[ "$(timeUntilNextDay)" -gt "$bufferTTL" ]]; then
+ vbm "DEBUG :$fn:SECONDS currently :$SECONDS";
+ SECONDS="$(( bufferTTL - ($(timeUntilNextDay) % bufferTTL) ))" && \
+ vbm "DEBUG :$fn:SECONDS advanced to:$SECONDS";
+ vbm "DEBUG :$fn:current time:$(date --iso-8601=seconds)";
+ fi;
## Init temp working dir
- try mkdir "$dir_tmp" && vbm "DEBUG:Working dir created at dir_tmp:$dir_tmp";
+ try mkdir "$dir_tmp" && vbm "DEBUG :$fn:Working dir created at dir_tmp:$dir_tmp";
## Initialize output tar (set pathout_tar)
- magicInitCheckTar;
+ magicInitCheckTar;
+ ## Append VERSION file to tar
+ magicWriteVersion;
# Check vital apps, files, dirs
if ! checkapp tar && ! checkdir "$dirOut" "dir_tmp"; then
- yell "ERROR:Critical components missing.";
+ yell "ERROR:$fn:Critical components missing.";
displayMissing; yell "Exiting."; exit 1; fi
# MAIN LOOP: Run until script TTL seconds pass
bufferRound=0;
while [[ $SECONDS -lt "scriptTTL" ]]; do
- bufferTOD="$((SECONDS + bufferTTL))"; # Set buffer round time-of-death
- lineCount=0; # Debug counter
+ vbm "STATUS:$fn:Starting buffer round:$bufferRound";
+ bufferTOD="$(( (1+bufferRound)*bufferTTL ))" && vbm "DEBUG :$fn:bufferTOD:$bufferTOD"; # Set buffer round time-of-death
# Consume stdin to fill buffer until buffer time-of-death (TOD) arrives
while read -r -t "$bufferTTL" line && [[ $SECONDS -lt "$bufferTOD" ]]; do
# Append line to buffer array
buffer+=("$line");
- echo "DEBUG:Processing line:$lineCount";
- echo "DEBUG:Current line :$line";
- echo "DEBUG:buf elem count :${#buffer[@]}";
- ((lineCount++));
done;
+ # Mark time for buffer
+ timeBufferEndEpoch="$timeBufferStartEpoch";
+ timeBufferStartEpoch="$(date +%s)" && vbm "DEBUG :$fn:timeBufferStartEpoch";
# Create dir_tmp if missing
- if ! [[ -d "$dir_tmp" ]]; then yell "ERROR:dir_tmp existence failure:$dir_tmp"; try mkdir "$dir_tmp" && vbm "DEBUG:Working dir recreated dir_tmp:$dir_tmp"; fi
- # Update encryption recipient array
- magicParseRecipientDir; # Update recPubKeysValid with argRecDir
+ if ! [[ -d "$dir_tmp" ]]; then
+ yell "ERROR:$fn:dir_tmp existence failure:$dir_tmp";
+ try mkdir "$dir_tmp" && vbm "DEBUG :$fn:Working dir recreated dir_tmp:$dir_tmp"; fi
+ # Update cmd_encrypt, cmd_encrypt_suffix
+ magicParseRecipients;
# Export buffer to asynchronous processing.
magicProcessWriteBuffer &
unset buffer; # Clear buffer array for next bufferRound
# Cleanup
## Remove dir_tmp
- try rm -r "$dir_tmp" && vbm "Removed dir_tmp:$dir_tmp";
+ try rm -r "$dir_tmp" && vbm "STATUS:$fn:Removed dir_tmp:$dir_tmp";
- vbm "STATUS:Main function finished.";
+ vbm "STATUS:$fn:Finished function main().";
} # Main function
#===END Declare local script functions===
projects / EVA-2020-02.git / blobdiff