doc(temp/README):Initialize README for temperature logging

[EVA-2020-02.git] / doc / location / README.org

diff --git a/doc/location/README.org b/doc/location/README.org
index 3676e3225b0afb712144610b98804a02690da9ad..d45fdae7d9182d0daa482720bb5d9f1f676f6923 100644 (file)
--- a/doc/location/README.org
+++ b/doc/location/README.org
@@ -4,8 +4,8 @@
 #+EMAIL: baltakatei@gmail.com
 ** About
 This document was created by Steven Baltakatei Sandoval on
-~2020-06-29T12:14Z~ under a [[https://creativecommons.org/licenses/by-sa/4.0/][Creative Commons BY-SA 4.0 license]]. It
-was updated by Steven Baltakatei Sandoval on ~2020-10-16T22:33Z~
+~2020-06-29T12:14Z~ under a [[https://creativecommons.org/licenses/by-sa/4.0/][Creative Commons BY-SA 4.0 license]]. It was
+updated by Steven Baltakatei Sandoval on ~2020-10-18T00:13Z~
 
 ** Narrative
 Ninfacyzga-01 records (logs) its position in time and space using a
@@ -135,16 +135,19 @@ GPSD_OPTIONS="-n"
 #+END_EXAMPLE
 
 NOTE: The ~DEVICES=~ line must be adjusted if the the ~ninfacyzga~
-device is configured to also track time.
+device is configured to also track time. (See [[file:../time/README.org::*Setup%20~gpsd~][ref]]).
 
 NOTE: The ~-n~ option causes ~gpsd~ to begin polling GPS devices
 without waiting for a client to connect. This is important if ~gpsd~
-provides data to other applications (ex: ~gpspipe~, ~ntpsec~,
-~chrony~).
+provides data to other applications (ex: ~gpspipe~, ~chrony~).
+
+Enable ~gpsd~ to run automatically via:
+
+: $ sudo systemctl enable gpsd
 
 Restart ~gpsd~ via:
 
-: $ sudo systemctl restart gpsd.service
+: $ sudo systemctl restart gpsd
 
 Run ~gpsmon~ to verify that location data is being recorded.