+ # Construct and deliver separator-les date string
+ DATE_CURRENT_SHORT="$(date -d "$TIME_INPUT" +%Y%m%d)"; # Produce separator-less current date with resolution 1 day.
+ echo "$DATE_CURRENT_SHORT";
+} # Get YYYYmmdd
+timeDuration(){
+ # Desc: Given seconds, output ISO-8601 duration string
+ # Ref/Attrib: ISO-8601:2004(E), §4.4.4.2 Representations of time intervals by duration and context information
+ # Note: "1 month" ("P1M") is assumed to be "30 days" (see ISO-8601:2004(E), §2.2.1.2)
+ # Usage: timeDuration [1:seconds] ([2:precision])
+ # Version: 1.0.3
+ # Input: arg1: seconds as base 10 integer >= 0 (ex: 3601)
+ # arg2: precision level (optional; default=2)
+ # Output: stdout: ISO-8601 duration string (ex: "P1H1S", "P2Y10M15DT10H30M20S")
+ # exit code 0: success
+ # exit code 1: error_input
+ # exit code 2: error_unknown
+ # Example: 'timeDuration 111111 3' yields 'P1DT6H51M'
+ # Depends: date 8 (gnucoreutils), yell,
+ local returnState argSeconds argPrecision remainder precision witherPrecision
+ local fullYears fullMonths fullDays fullHours fullMinutes fullSeconds
+ local displayYears displayMonths displayDays displayHours displayMinutes displaySeconds
+ local hasYears hasMonths hasDays hasHours hasMinutes hasSeconds
+
+ argSeconds="$1"; # read arg1 (seconds)
+ argPrecision="$2"; # read arg2 (precision)
+ precision=2; # set default precision
+
+ # Check that between one and two arguments is supplied
+ if ! { [[ $# -ge 1 ]] && [[ $# -le 2 ]]; }; then
+ yell "ERROR:Invalid number of arguments:$# . Exiting.";
+ returnState="error_input"; fi
+
+ # Check that argSeconds provided
+ if [[ $# -ge 1 ]]; then
+ ## Check that argSeconds is a positive integer
+ if [[ "$argSeconds" =~ ^[[:digit:]]+$ ]]; then
+ :
+ else
+ yell "ERROR:argSeconds not a digit.";
+ returnState="error_input";
+ fi
+ else
+ yell "ERROR:No argument provided. Exiting.";
+ exit 1;
+ fi
+
+ # Consider whether argPrecision was provided
+ if [[ $# -eq 2 ]]; then
+ # Check that argPrecision is a positive integer
+ if [[ "$argPrecision" =~ ^[[:digit:]]+$ ]] && [[ "$argPrecision" -gt 0 ]]; then
+ precision="$argPrecision";
+ else
+ yell "ERROR:argPrecision not a positive integer. (is $argPrecision ). Leaving early.";
+ returnState="error_input";
+ fi;
+ else
+ :
+ fi;
+
+ remainder="$argSeconds" ; # seconds
+ ## Calculate full years Y, update remainder
+ fullYears=$(( remainder / (365*24*60*60) ));
+ remainder=$(( remainder - (fullYears*365*24*60*60) ));
+ ## Calculate full months M, update remainder
+ fullMonths=$(( remainder / (30*24*60*60) ));
+ remainder=$(( remainder - (fullMonths*30*24*60*60) ));
+ ## Calculate full days D, update remainder
+ fullDays=$(( remainder / (24*60*60) ));
+ remainder=$(( remainder - (fullDays*24*60*60) ));
+ ## Calculate full hours H, update remainder
+ fullHours=$(( remainder / (60*60) ));
+ remainder=$(( remainder - (fullHours*60*60) ));
+ ## Calculate full minutes M, update remainder
+ fullMinutes=$(( remainder / (60) ));
+ remainder=$(( remainder - (fullMinutes*60) ));
+ ## Calculate full seconds S, update remainder
+ fullSeconds=$(( remainder / (1) ));
+ remainder=$(( remainder - (remainder*1) ));
+ ## Check which fields filled
+ if [[ $fullYears -gt 0 ]]; then hasYears="true"; else hasYears="false"; fi
+ if [[ $fullMonths -gt 0 ]]; then hasMonths="true"; else hasMonths="false"; fi
+ if [[ $fullDays -gt 0 ]]; then hasDays="true"; else hasDays="false"; fi
+ if [[ $fullHours -gt 0 ]]; then hasHours="true"; else hasHours="false"; fi
+ if [[ $fullMinutes -gt 0 ]]; then hasMinutes="true"; else hasMinutes="false"; fi
+ if [[ $fullSeconds -gt 0 ]]; then hasSeconds="true"; else hasSeconds="false"; fi
+
+ ## Determine which fields to display (see ISO-8601:2004 §4.4.3.2)
+ witherPrecision="false"
+
+ ### Years
+ if $hasYears && [[ $precision -gt 0 ]]; then
+ displayYears="true";
+ witherPrecision="true";
+ else
+ displayYears="false";
+ fi;
+ if $witherPrecision; then ((precision--)); fi;
+
+ ### Months
+ if $hasMonths && [[ $precision -gt 0 ]]; then
+ displayMonths="true";
+ witherPrecision="true";
+ else
+ displayMonths="false";
+ fi;
+ if $witherPrecision && [[ $precision -gt 0 ]]; then
+ displayMonths="true";
+ fi;
+ if $witherPrecision; then ((precision--)); fi;
+
+ ### Days
+ if $hasDays && [[ $precision -gt 0 ]]; then
+ displayDays="true";
+ witherPrecision="true";
+ else
+ displayDays="false";
+ fi;
+ if $witherPrecision && [[ $precision -gt 0 ]]; then
+ displayDays="true";
+ fi;
+ if $witherPrecision; then ((precision--)); fi;
+
+ ### Hours
+ if $hasHours && [[ $precision -gt 0 ]]; then
+ displayHours="true";
+ witherPrecision="true";
+ else
+ displayHours="false";
+ fi;
+ if $witherPrecision && [[ $precision -gt 0 ]]; then
+ displayHours="true";
+ fi;
+ if $witherPrecision; then ((precision--)); fi;
+
+ ### Minutes
+ if $hasMinutes && [[ $precision -gt 0 ]]; then
+ displayMinutes="true";
+ witherPrecision="true";
+ else
+ displayMinutes="false";
+ fi;
+ if $witherPrecision && [[ $precision -gt 0 ]]; then
+ displayMinutes="true";
+ fi;
+ if $witherPrecision; then ((precision--)); fi;
+
+ ### Seconds
+
+ if $hasSeconds && [[ $precision -gt 0 ]]; then
+ displaySeconds="true";
+ witherPrecision="true";
+ else
+ displaySeconds="false";
+ fi;
+ if $witherPrecision && [[ $precision -gt 0 ]]; then
+ displaySeconds="true";
+ fi;
+ if $witherPrecision; then ((precision--)); fi;
+
+ ## Determine whether or not the "T" separator is needed to separate date and time elements
+ if ( $displayHours || $displayMinutes || $displaySeconds); then
+ displayDateTime="true"; else displayDateTime="false"; fi
+
+ ## Construct duration output string
+ OUTPUT="P"
+ if $displayYears; then
+ OUTPUT=$OUTPUT$fullYears"Y"; fi
+ if $displayMonths; then
+ OUTPUT=$OUTPUT$fullMonths"M"; fi
+ if $displayDays; then
+ OUTPUT=$OUTPUT$fullDays"D"; fi
+ if $displayDateTime; then
+ OUTPUT=$OUTPUT"T"; fi
+ if $displayHours; then
+ OUTPUT=$OUTPUT$fullHours"H"; fi
+ if $displayMinutes; then
+ OUTPUT=$OUTPUT$fullMinutes"M"; fi
+ if $displaySeconds; then
+ OUTPUT=$OUTPUT$fullSeconds"S"; fi
+
+ ## Output duration string to stdout
+ echo "$OUTPUT" && returnState="true";
+
+ #===Determine function return code===
+ if [ "$returnState" = "true" ]; then
+ return 0;
+ elif [ "$returnState" = "error_input" ]; then
+ yell "ERROR:input";
+ return 1;
+ else
+ yell "ERROR:Unknown";
+ return 2;
+ fi
+
+} # Get duration (ex: PT10M4S )
+displayMissing() {
+ # Desc: Displays missing apps, files, and dirs
+ # Usage: displayMissing
+ # Input: associative arrays: appRollCall, fileRollCall, dirRollCall
+ # Output: stderr messages
+ #==BEGIN Display errors==
+ #===BEGIN Display Missing Apps===
+ missingApps="Missing apps :"
+ #for key in "${!appRollCall[@]}"; do echo "DEBUG:$key => ${appRollCall[$key]}"; done
+ for key in "${!appRollCall[@]}"; do
+ value="${appRollCall[$key]}"
+ if [ "$value" = "false" ]; then
+ #echo "DEBUG:Missing apps: $key => $value";
+ missingApps="$missingApps""$key "
+ appMissing="true"
+ fi
+ done
+ if [ "$appMissing" = "true" ]; then # Only indicate if an app is missing.
+ echo "$missingApps" 1>&2;
+ fi
+ #===END Display Missing Apps===
+
+ #===BEGIN Display Missing Files===
+ missingFiles="Missing files:"
+ #for key in "${!fileRollCall[@]}"; do echo "DEBUG:$key => ${fileRollCall[$key]}"; done
+ for key in "${!fileRollCall[@]}"; do
+ value="${fileRollCall[$key]}"
+ if [ "$value" = "false" ]; then
+ #echo "DEBUG:Missing files: $key => $value";
+ missingFiles="$missingFiles""$key "
+ fileMissing="true"
+ fi
+ done
+ if [ "$fileMissing" = "true" ]; then # Only indicate if an app is missing.
+ echo "$missingFiles" 1>&2;
+ fi
+ #===END Display Missing Files===
+
+ #===BEGIN Display Missing Directories===
+ missingDirs="Missing dirs:"
+ #for key in "${!dirRollCall[@]}"; do echo "DEBUG:$key => ${dirRollCall[$key]}"; done
+ for key in "${!dirRollCall[@]}"; do
+ value="${dirRollCall[$key]}"
+ if [ "$value" = "false" ]; then
+ #echo "DEBUG:Missing dirs: $key => $value";
+ missingDirs="$missingDirs""$key "
+ dirMissing="true"
+ fi
+ done
+ if [ "$dirMissing" = "true" ]; then # Only indicate if an dir is missing.
+ echo "$missingDirs" 1>&2;
+ fi
+ #===END Display Missing Directories===
+
+ #==END Display errors==
+} # Display missing apps, files, dirs
+magicSetScriptTTL() {
+ #Desc: Sets script_TTL seconds from provided time_element string argument
+ #Usage: magicSetScriptTTL [str time_element]
+ #Input: arg1: string (Ex: SCRIPT_TTL_TE; "day" or "hour")
+ #Output: var: SCRIPT_TTL (integer seconds)
+ #Depends: timeUntilNextHour, timeUntilNextDay
+ local argTimeElement
+ argTimeElement="$1"
+ if [[ "$argTimeElement" = "day" ]]; then
+ # Set script lifespan to end at start of next day
+ if ! SCRIPT_TTL="$(timeUntilNextDay)"; then
+ if [[ "$SCRIPT_TTL" -eq 0 ]]; then
+ ((SCRIPT_TTL++)); # Add 1 because 0 would cause 'timeout' to never timeout.
+ else
+ yell "ERROR: timeUntilNextDay exit code $?"; exit 1;
+ fi;
+ fi;
+ elif [[ "$argTimeElement" = "hour" ]]; then
+ # Set script lifespan to end at start of next hour
+ if ! SCRIPT_TTL="$(timeUntilNextHour)"; then
+ if [[ "$SCRIPT_TTL" -eq 0 ]]; then
+ ((SCRIPT_TTL++)); # Add 1 because 0 would cause 'timeout' to never timeout.
+ else
+ yell "ERROR: timeUntilNextHour exit code $?"; exit 1;
+ fi;
+ fi;
+ else
+ yell "ERROR:Invalid argument for setScriptTTL function:$argTimeElement"; exit 1;
+ fi
+} # Seconds until next (day|hour).
+checkMakeTar() {
+ # Desc: Checks that a valid tar archive exists, creates one otherwise
+ # Usage: checkMakeTar [ path ]
+ # Version: 1.0.1
+ # Input: arg1: path of tar archive
+ # Output: exit code 0 : tar readable
+ # exit code 1 : tar missing; created
+ # exit code 2 : tar not readable; moved; replaced
+ # Depends: try, tar, date
+ local PATH_TAR returnFlag0 returnFlag1 returnFlag2
+ PATH_TAR="$1"
+
+ # Check if file is a valid tar archive
+ if tar --list --file="$PATH_TAR" 1>/dev/null 2>&1; then
+ ## T1: return success
+ returnFlag0="tar valid";
+ else
+ ## F1: Check if file exists
+ if [[ -f "$PATH_TAR" ]]; then
+ ### T: Rename file
+ try mv "$PATH_TAR" "$PATH_TAR""--broken--""$(date +%Y%m%dT%H%M%S)" && \
+ returnFlag1="tar moved";
+ else
+ ### F: -
+ :
+ fi
+ ## F2: Create tar archive, return 0
+ try tar --create --file="$PATH_TAR" --files-from=/dev/null && \
+ returnFlag2="tar created";
+ fi
+
+ # Determine function return code
+ if [[ "$returnFlag0" = "tar valid" ]]; then
+ return 0;
+ elif [[ "$returnFlag2" = "tar created" ]] && ! [[ "$returnFlag1" = "tar moved" ]]; then
+ return 1; # tar missing so created
+ elif [[ "$returnFlag2" = "tar created" ]] && [[ "$returnFlag1" = "tar moved" ]]; then
+ return 2; # tar not readable so moved; replaced
+ fi
+} # checks if arg1 is tar; creates one otherwise
+appendArgTar(){
+ # Desc: Writes first argument to temporary file with arguments as options, then appends file to tar
+ # Usage: appendArgTar "$(echo "Data to be written.")" [name of file to be inserted] [tar path] [temp dir] ([cmd1] [cmd2] [cmd3] [cmd4]...)
+ # Version: 1.0.3
+ # Input: arg1: data to be written
+ # arg2: file name of file to be inserted into tar
+ # arg3: tar archive path (must exist first)
+ # arg4: temporary working dir
+ # arg5+: command strings (ex: "gpsbabel -i nmea -f - -o kml -F - ")
+ # Output: file written to disk
+ # Example: decrypt multiple large files in parallel
+ # appendArgTar "$(cat /tmp/largefile1.gpg)" "largefile1" $HOME/archive.tar /tmp "gpg --decrypt" &
+ # appendArgTar "$(cat /tmp/largefile2.gpg)" "largefile2" $HOME/archive.tar /tmp "gpg --decrypt" &
+ # appendArgTar "$(cat /tmp/largefile3.gpg)" "largefile3" $HOME/archive.tar /tmp "gpg --decrypt" &
+ # Depends: bash 5
+ # Ref/Attrib: Using 'eval' to construct command strings https://askubuntu.com/a/476533
+
+ # Save function name
+ local FN="${FUNCNAME[0]}";
+ #yell "DEBUG:STATUS:$FN:Finished appendArgTar()."
+
+ # Set file name
+ if ! [ -z "$2" ]; then FILENAME="$2"; else yell "ERROR:$FN:Not enough arguments."; exit 1; fi
+
+ # Check tar path is a file
+ if [ -f "$3" ]; then TAR_PATH="$3"; else yell "ERROR:$FN:Tar archive arg not a file."; exit 1; fi
+
+ # Check temp dir arg
+ if ! [ -z "$4" ]; then TMP_DIR="$4"; else yell "ERROR:$FN:No temporary working dir set."; exit 1; fi
+
+ # Set command strings
+ if ! [ -z "$5" ]; then CMD1="$5"; else CMD1="tee /dev/null "; fi # command string 1
+ if ! [ -z "$6" ]; then CMD2="$6"; else CMD2="tee /dev/null "; fi # command string 2
+ if ! [ -z "$7" ]; then CMD3="$7"; else CMD3="tee /dev/null "; fi # command string 3
+ if ! [ -z "$8" ]; then CMD4="$8"; else CMD4="tee /dev/null "; fi # command string 4
+
+ # Input command
+ CMD0="echo \"\$1\""
+
+ # # Debug
+ # yell "DEBUG:STATUS:$FN:CMD0:$CMD0"
+ # yell "DEBUG:STATUS:$FN:CMD1:$CMD1"
+ # yell "DEBUG:STATUS:$FN:CMD2:$CMD2"
+ # yell "DEBUG:STATUS:$FN:CMD3:$CMD3"
+ # yell "DEBUG:STATUS:$FN:CMD4:$CMD4"
+ # yell "DEBUG:STATUS:$FN:FILENAME:$FILENAME"
+ # yell "DEBUG:STATUS:$FN:TAR_PATH:$TAR_PATH"
+ # yell "DEBUG:STATUS:$FN:TMP_DIR:$TMP_DIR"
+
+ # Write to temporary working dir
+ eval "$CMD0"" | ""$CMD1"" | ""$CMD2"" | ""$CMD3"" | ""$CMD4" > "$TMP_DIR"/"$FILENAME";
+
+ # Append to tar
+ try tar --append --directory="$TMP_DIR" --file="$TAR_PATH" "$FILENAME";
+ #yell "DEBUG:STATUS:$FN:Finished appendArgTar()."
+} # Append Bash var to file appended to Tar archive
+appendFileTar(){
+ # Desc: Processes first file and then appends to tar
+ # Usage: appendFileTar [file path] [name of file to be inserted] [tar path] [temp dir] ([cmd1] [cmd2] [cmd3] [cmd4]...)
+ # Version: 1.0.2
+ # Input: arg1: path of file to be (processed and) written
+ # arg2: name to use for file inserted into tar
+ # arg3: tar archive path (must exist first)
+ # arg4: temporary working dir
+ # arg5+: command strings (ex: "gpsbabel -i nmea -f - -o kml -F - ")
+ # Output: file written to disk
+ # Example: decrypt multiple large files in parallel
+ # appendFileTar /tmp/largefile1.gpg "largefile1" $HOME/archive.tar /tmp "gpg --decrypt" &
+ # appendFileTar /tmp/largefile2.gpg "largefile2" $HOME/archive.tar /tmp "gpg --decrypt" &
+ # appendFileTar /tmp/largefile3.gpg "largefile3" $HOME/archive.tar /tmp "gpg --decrypt" &
+ # Depends: bash 5
+
+ # Save function name
+ local FN="${FUNCNAME[0]}";
+ #yell "DEBUG:STATUS:$FN:Finished appendFileTar()."
+
+ # Set file name
+ if ! [ -z "$2" ]; then FILENAME="$2"; else yell "ERROR:$FN:Not enough arguments."; exit 1; fi
+ # Check tar path is a file
+ if [ -f "$3" ]; then TAR_PATH="$3"; else yell "ERROR:$FN:Tar archive arg not a file."; exit 1; fi
+ # Check temp dir arg
+ if ! [ -z "$4" ]; then TMP_DIR="$4"; else yell "ERROR:$FN:No temporary working dir set."; exit 1; fi
+ # Set command strings
+ if ! [ -z "$5" ]; then CMD1="$5"; else CMD1="tee /dev/null "; fi # command string 1
+ if ! [ -z "$6" ]; then CMD2="$6"; else CMD2="tee /dev/null "; fi # command string 2
+ if ! [ -z "$7" ]; then CMD3="$7"; else CMD3="tee /dev/null "; fi # command string 3
+ if ! [ -z "$8" ]; then CMD4="$8"; else CMD4="tee /dev/null "; fi # command string 4
+
+ # Input command string
+ CMD0="cat \"\$1\""
+
+ # # Debug
+ # yell "DEBUG:STATUS:$FN:CMD0:$CMD0"
+ # yell "DEBUG:STATUS:$FN:CMD1:$CMD1"
+ # yell "DEBUG:STATUS:$FN:CMD2:$CMD2"
+ # yell "DEBUG:STATUS:$FN:CMD3:$CMD3"
+ # yell "DEBUG:STATUS:$FN:CMD4:$CMD4"
+ # yell "DEBUG:STATUS:$FN:FILENAME:$FILENAME"
+ # yell "DEBUG:STATUS:$FN:TAR_PATH:$TAR_PATH"
+ # yell "DEBUG:STATUS:$FN:TMP_DIR:$TMP_DIR"
+
+ # Write to temporary working dir
+ eval "$CMD0 | $CMD1 | $CMD2 | $CMD3 | $CMD4" > "$TMP_DIR"/"$FILENAME";
+
+ # Append to tar
+ try tar --append --directory="$TMP_DIR" --file="$TAR_PATH" "$FILENAME";
+ #yell "DEBUG:STATUS:$FN:Finished appendFileTar()."
+} # Append file to Tar archive
+checkAgePubkey() {
+ # Desc: Checks if string is an age-compatible pubkey
+ # Usage: checkAgePubkey [str pubkey]
+ # Version: 0.1.2
+ # Input: arg1: string
+ # Output: return code 0: string is age-compatible pubkey
+ # return code 1: string is NOT an age-compatible pubkey
+ # age stderr (ex: there is stderr if invalid string provided)
+ # Depends: age (v0.1.0-beta2; https://github.com/FiloSottile/age/releases/tag/v1.0.0-beta2 )
+
+ argPubkey="$1";
+
+ if echo "test" | age -a -r "$argPubkey" 1>/dev/null; then
+ return 0;
+ else
+ return 1;
+ fi;
+} # Check age pubkey
+validateInput() {
+ # Desc: Validates Input
+ # Usage: validateInput [str input] [str input type]
+ # Version: 0.3.0
+ # Input: arg1: string to validate
+ # arg2: string specifying input type (ex:"ssh_pubkey")
+ # Output: return code 0: if input string matched specified string type
+ # Depends: bash 5, yell
+
+ # Save function name
+ local FN="${FUNCNAME[0]}";
+
+ # Process arguments
+ argInput="$1";
+ argType="$2";
+ if [[ $# -gt 2 ]]; then yell "ERROR:$0:$FN:Too many arguments."; exit 1; fi;
+
+ # Check for blank
+ if [[ -z "$argInput" ]]; then return 1; fi
+
+ # Define input types
+ ## ssh_pubkey
+ ### Check for alnum/dash base64 (ex: "ssh-rsa AAAAB3NzaC1yc2EAAA")
+ if [[ "$argType" = "ssh_pubkey" ]]; then
+ if [[ "$argInput" =~ ^[[:alnum:]-]*[\ ]*[[:alnum:]+/=]*$ ]]; then
+ return 0; fi; fi;
+
+ ## age_pubkey
+ ### Check for age1[:bech32:]
+ if [[ "$argType" = "age_pubkey" ]]; then
+ if [[ "$argInput" =~ ^age1[qpzry9x8gf2tvdw0s3jn54khce6mua7l]*$ ]]; then
+ return 0; fi; fi
+
+ ## integer
+ if [[ "$argType" = "integer" ]]; then
+ if [[ "$argInput" =~ ^[[:digit:]]*$ ]]; then
+ return 0; fi; fi;
+
+ ## time element (year, month, week, day, hour, minute, second)
+ if [[ "$argType" = "time_element" ]]; then
+ if [[ "$argInput" = "year" ]] || \
+ [[ "$argInput" = "month" ]] || \
+ [[ "$argInput" = "week" ]] || \
+ [[ "$argInput" = "day" ]] || \
+ [[ "$argInput" = "hour" ]] || \
+ [[ "$argInput" = "minute" ]] || \
+ [[ "$argInput" = "second" ]]; then
+ return 0; fi; fi;
+
+ # Return error if no condition matched.
+ return 1;
+} # Validates strings
+timeEpochNS() {
+ # Desc: Get epoch nanoseconds
+ # Usage: timeEpochNS
+ # Version 0.2.2
+ # Input: arg1: 'date'-parsable timestamp string (optional)
+ # Output: Nanoseconds since 1970-01-01
+ # Depends: date 8, yell()
+ # Ref/Attrib: Force base 10 Bash arith with '10#'. https://stackoverflow.com/a/24777667
+ local TIME_CURRENT TIME_INPUT TIME_EPOCH_FLOAT TIME_EPOCH_NSFRAC
+ local TIME_EPOCH_NS
+
+ argTime="$1";
+
+ # Get Current Time
+ TIME_CURRENT="$(date --iso-8601=ns)"; # Produce `date`-parsable current timestamp with resolution of 1 nanosecond.
+
+ # Decide to parse current or supplied time
+ ## Check if time argument empty
+ if [[ -z "$argTime" ]]; then
+ ## T: Time argument empty, use current time
+ TIME_INPUT="$TIME_CURRENT";
+ else
+ ## F: Time argument exists, validate time
+ if date --date="$argTime" 1>/dev/null 2>&1; then
+ ### T: Time argument is valid; use it
+ TIME_INPUT="$argTime";
+ else
+ ### F: Time argument not valid; exit
+ yell "ERROR:Invalid time argument supplied. Exiting."; exit 1;
+ fi;
+ fi;
+ # Construct and deliver nanoseconds since 1970-01-01
+ TIME_EPOCH_FLOAT="$(date --date="$TIME_INPUT" +%s.%N)"; # Save ssss.NNNNNNNNN
+ TIME_EPOCH_INT="$(echo "$TIME_EPOCH_FLOAT" | cut -d. -f1)"; # Get ssss
+ TIME_EPOCH_NSFRAC="$(echo "$TIME_EPOCH_FLOAT" | cut -d. -f2)"; # Get NNNNNNNNN
+ TIME_EPOCH_NS="$(( (10#"$TIME_EPOCH_INT" * 10**9) + (10#"$TIME_EPOCH_NSFRAC") ))";
+ echo "$TIME_EPOCH_NS";
+} # Nanoseconds since 1970-01-01
+magicBufferSleepPID() {
+ # Desc: Compensates for lag so buffer rounds start every BUFFER_TTL seconds
+ # Input: vars: BUFFER_TTL, errResetx10e3, K_P, T_I, T_D
+ # # Input: array: errorHistory
+ # Output: vars: BUFFER_TTL_ADJ_FLOAT
+ # Re/Attrib: https://en.wikipedia.org/wiki/PID_controller#Standard_versus_parallel_(ideal)_form
+ local BUFFER_TTL_NS
+ local timeBufferStartNS timeBufferStartNSExp errNS errNSx10e3
+ local errResetx10e3 errRatex10e3 ADJ BUFFER_TTL_ADJ_NS BUFFER_TTL_ADJ_INT
+ local BUFFER_TTL_ADJ_FLOATFRAC
+ # local errorHistorySize
+
+ # ## Define errorHistorySize
+ # errorHistorySize=100;
+ ## Define BUFFER_TTL in nanoseconds
+ BUFFER_TTL_NS=$((BUFFER_TTL * 10**9)) && vbm "BUFFER_TTL_NS:$BUFFER_TTL_NS";
+
+ ### PID Control factors
+ K_P=1; # Gain for compensating buffer round lag
+ T_I="$(((4)*BUFFER_TTL_NS/(1)))"; # Consider this number of past nanoseconds to eliminate error
+ T_D="$(((1)*BUFFER_TTL_NS/(1)))"; # Predict value this number of nanoseconds into the future
+
+ # Calculate Error, errNS, in nanoseconds
+ ## Get current time
+ timeBufferStartNS="$(timeEpochNS)" && vbm "timeBufferStartNS :$timeBufferStartNS";
+ ## Calculate expected time (from start time, current buffer round number, nominal BUFFER_TTL)
+ timeBufferStartNSExp="$(( (timeBufferFirstNS) + (BUFFER_TTL_NS * bufferRound) ))" && vbm "timeBufferStartNSExp:$timeBufferStartNSExp";
+ ## Calculate error (diff between timeBufferStartNSExp and timeBufferStartNS; usually negative)
+ errNS="$(( timeBufferStartNSExp - timeBufferStartNS ))" && vbm "errNS:$errNS";
+# errNSx10e3="$((errNS*10**3))" && vbm "errNSx10e3:$errNSx10e3";
+ # ## Append error to errorHistory
+ # errorHistory+=("errNS");
+ # ### Trim errorHistory array if over errorHistorySize
+ # while [[ "${#errorHistory[@]}" -gt "errorHistorySize" ]]; then do
+ # unset "errorHistory[0]"; # remove oldest entry, creating sparse array
+ # errorHistory=("${errorHistory[@]}"); # reindex sparse array
+ # vbm "STATUS:Trimmed errorHistory array. Entry count:${#errorHistory[@]}";
+ # done;
+
+ # Calculate errReset in nanoseconds^2
+ ## errReset = int(errHistory(t),wrt(delta_BUFFER_TTL))
+ ## Integrate errorHistory with respect to time
+ # for value in "${errorHistory[@]}"; do
+ # errReset=$(( errReset + ( value*BUFFER_TTL_NS ) ));
+ # done;
+ vbm "errReset(orig):$errReset"
+ errReset="$(( (errReset + (errNS*BUFFER_TTL_NS)) ))" && vbm "errReset(post):$errReset";
+# errResetx10e3="$(( ( errResetx10e3 + ( errNSx10e3 * BUFFER_TTL_NS ) )*10**3 ))" && vbm "errResetx10e3:$errResetx10e3";
+
+ # Calculate errRate in nanoseconds per nanosecond
+ errRate="$(( errNS / BUFFER_TTL_NS ))" && vbm "errRate:$errRate";
+# errRatex10e3="$(( ( errNSx10e3 ) / BUFFER_TTL_NS ))" && vbm "errRatex10e3:$errRatex10e3";
+
+ # Debug
+ vbm "errNS :$errNS";
+ vbm "errResetTerm:$((errReset/T_I))";
+ vbm "errRateTerm :$((errRate*T_D))";
+
+ # Calculate PID control signal
+ ## ADJ = K_P * (errNS + errReset/T_I + errRate*T_D)
+ ADJ="$(( K_P*(errNS + errReset/T_I + errRate*T_D) ))" && vbm "ADJ:$ADJ";
+# ADJ="$((K_P*(errNSx10e3 + (errResetx10e3/T_I) + (errRatex10e3*T_D) )/(10**3)))" && vbm "ADJ:$ADJ";
+
+ # Calculate BUFFER_TTL_ADJ_FLOAT from ADJ (ns)
+ ## Calculate BUFFER_TTL_ADJ in nanoseconds (BUFFER_TTL_ADJ_NS = BUFFER_TTL_NS + ADJ)
+ BUFFER_TTL_ADJ_NS="$((BUFFER_TTL_NS + ADJ))" && vbm "BUFFER_TTL_ADJ_NS:$BUFFER_TTL_ADJ_NS";
+ ## Calculate integer seconds
+ BUFFER_TTL_ADJ_INT="$((BUFFER_TTL_ADJ_NS/(10**9)))" && vbm "BUFFER_TTL_ADJ_INT:$BUFFER_TTL_ADJ_INT";
+ ### Catch negative integer seconds, set minimum of BUFFER_TTL/10 seconds
+ if [[ "$BUFFER_TTL_ADJ_INT" -le "$((BUFFER_TTL/10))" ]]; then
+ BUFFER_TTL_ADJ_INT="$((BUFFER_TTL/10))";
+ yell "WARNING:Buffer lag adjustment yielded negative seconds.";
+ fi;
+ ## Calculate nanosecond remainder
+ ### Remove integer
+ BUFFER_TTL_ADJ_FLOATFRAC="$((BUFFER_TTL_ADJ_NS - (BUFFER_TTL_ADJ_INT*(10**9)) ))" && vbm "BUFFER_TTL_ADJ_FLOATFRAC:$BUFFER_TTL_ADJ_FLOATFRAC";
+ ### Calc absolute value of fraction (by removing '-' if present; see https://stackoverflow.com/a/47240327
+ BUFFER_TTL_ADJ_FLOATFRAC="${BUFFER_TTL_ADJ_FLOATFRAC#-}" && vbm "BUFFER_TTL_ADJ_FLOATFRAC:$BUFFER_TTL_ADJ_FLOATFRAC";
+ ## Form float BUFFER_TTL_ADJ_FLOAT
+ BUFFER_TTL_ADJ_FLOAT="$BUFFER_TTL_ADJ_INT"."$BUFFER_TTL_ADJ_FLOATFRAC" && vbm "BUFFER_TTL_ADJ_FLOAT:$BUFFER_TTL_ADJ_FLOAT";
+ vbm "STATUS:Calculated adjusted BUFFER_TTL (seconds):$BUFFER_TTL_ADJ_FLOAT";
+} # Calc BUFFER_TTL_ADJ_FLOAT so buffer starts every BUFFER_TTL seconds
+magicWriteVersion() {
+ # Desc: Appends time-stamped VERSION to PATHOUT_TAR
+ # Usage: magicWriteVersion
+ # Version: 0.1.0
+ # Input: CONTENT_VERSION, FILEOUT_VERSION, PATHOUT_TAR, DIR_TMP
+ # Input: SCRIPT_VERSION, SCRIPT_URL, AGE_VERSION, AGE_URL, SCRIPT_HOSTNAME
+ # Output: appends tar PATHOUT_TAR
+ # Depends: dateTimeShort, appendArgTar
+ local CONTENT_VERSION pubKeyIndex
+
+ # Set VERSION file name
+ FILEOUT_VERSION="$(dateTimeShort)..VERSION";
+
+ # Gather VERSION data in CONTENT_VERSION
+ CONTENT_VERSION="SCRIPT_VERSION=$SCRIPT_VERSION";
+ #CONTENT_VERSION="$CONTENT_VERSION""\\n";
+ CONTENT_VERSION="$CONTENT_VERSION""\\n""SCRIPT_NAME=$SCRIPT_NAME";
+ CONTENT_VERSION="$CONTENT_VERSION""\\n""SCRIPT_URL=$SCRIPT_URL";
+ CONTENT_VERSION="$CONTENT_VERSION""\\n""AGE_VERSION=$AGE_VERSION";
+ CONTENT_VERSION="$CONTENT_VERSION""\\n""AGE_URL=$AGE_URL";
+ CONTENT_VERSION="$CONTENT_VERSION""\\n""DATE=$(date --iso-8601=seconds)";
+ CONTENT_VERSION="$CONTENT_VERSION""\\n""HOSTNAME=$SCRIPT_HOSTNAME";
+ ## Add list of recipient pubkeys
+ for pubkey in "${recPubKeysValid[@]}"; do
+ ((pubKeyIndex++))
+ CONTENT_VERSION="$CONTENT_VERSION""\\n""PUBKEY_$pubKeyIndex=$pubkey";
+ done
+ ## Process newline escapes
+ CONTENT_VERSION="$(echo -e "$CONTENT_VERSION")"
+
+ # Write CONTENT_VERSION as file FILEOUT_VERSION and write-append to PATHOUT_TAR
+ appendArgTar "$CONTENT_VERSION" "$FILEOUT_VERSION" "$PATHOUT_TAR" "$DIR_TMP";
+
+} # bkgpslog: write version data to PATHOUT_TAR via appendArgTar()
+magicGatherWriteBuffer() {
+ # Desc: bkgpslog-specific meta function for writing data to DIR_TMP then appending each file to PATHOUT_TAR
+ # Inputs: vars: PATHOUT_TAR FILEOUT_{NMEA,GPX,KML} CMD_CONV_{NMEA,GPX,KML} CMD_{COMPRESS,ENCRYPT} DIR_TMP,
+ # Inputs: vars: BUFFER_TTL bufferTTL_STR SCRIPT_HOSTNAME CMD_COMPRESS_SUFFIX CMD_ENCRYPT_SUFFIX
+ # Output: file: (PATHOUT_TAR)
+ # Depends: yell(), try(), vbm(), appendArgTar(), tar 1, sleep 8, checkMakeTar()
+ # Depends: magicWriteVersion(), appendFileTar()
+ local FN
+
+ vbm "DEBUG:STATUS:$FN:Started magicGatherWriteBuffer().";
+ # Debug:Get function name
+ FN="${FUNCNAME[0]}";
+
+ # Create buffer file with unique name
+ PATHOUT_BUFFER="$DIR_TMP/buffer$SECONDS" && vbm "PATHOUT_BUFFER:$PATHOUT_BUFFER";
+ # Fill buffer
+ timeout "$BUFFER_TTL"s gpspipe -r -o "$PATHOUT_BUFFER" ;
+ timeBufferStartLong="$(date --date="$BUFFER_TTL seconds ago" --iso-8601=seconds)" && vbm "timeBufferStartLong:$timeBufferStartLong" || yell "ERROR:timeBufferStartLong fail";
+ timeBufferStart="$(dateTimeShort "$timeBufferStartLong" )" && vbm "timeBufferStart:$timeBufferStart" || yell "ERROR:timeBufferStart fail"; # Note start time
+ # Determine file paths (time is start of buffer period)
+ FILEOUT_BASENAME="$timeBufferStart""--""$bufferTTL_STR""..""$SCRIPT_HOSTNAME""_location" && vbm "STATUS:Set FILEOUT_BASENAME to:$FILEOUT_BASENAME";
+ ## Files saved to DIR_TMP
+ FILEOUT_NMEA="$FILEOUT_BASENAME".nmea"$CMD_COMPRESS_SUFFIX""$CMD_ENCRYPT_SUFFIX" && vbm "STATUS:Set FILEOUT_NMEA to:$FILEOUT_NMEA";
+ FILEOUT_GPX="$FILEOUT_BASENAME".gpx"$CMD_COMPRESS_SUFFIX""$CMD_ENCRYPT_SUFFIX" && vbm "STATUS:Set FILEOUT_GPX to:$FILEOUT_GPX";
+ FILEOUT_KML="$FILEOUT_BASENAME".kml"$CMD_COMPRESS_SUFFIX""$CMD_ENCRYPT_SUFFIX" && vbm "STATUS:Set FILEOUT_KML to:$FILEOUT_KML";
+ PATHOUT_NMEA="$DIR_TMP"/"$FILEOUT_NMEA" && vbm "STATUS:Set PATHOUT_NMEA to:$PATHOUT_NMEA";
+ PATHOUT_GPX="$DIR_TMP"/"$FILEOUT_GPX" && vbm "STATUS:Set PATHOUT_GPX to:$PATHOUT_GPX";
+ PATHOUT_KML="$DIR_TMP"/"$FILEOUT_KML" && vbm "STATUS:Set PATHOUT_KML to:$PATHOUT_KML";
+ ## Files saved to disk (DIR_OUT)
+ ### one file per day (Ex: "20200731..hostname_location.[.gpx.gz].tar")
+ PATHOUT_TAR="$DIR_OUT"/"$(dateShort "$(date --date="$BUFFER_TTL seconds ago" --iso-8601=seconds)")".."$SCRIPT_HOSTNAME""_location""$CMD_COMPRESS_SUFFIX""$CMD_ENCRYPT_SUFFIX".tar && \
+ vbm "STATUS:Set PATHOUT_TAR to:$PATHOUT_TAR";
+ # DEBUG: check vars
+ vbm "STATUS:FN :$FN";
+ vbm "STATUS:DIR_TMP :$DIR_TMP";
+ vbm "STATUS:PATHOUT_TAR :$PATHOUT_TAR";
+ vbm "STATUS:PATHOUT_NMEA :$PATHOUT_NMEA";
+ vbm "STATUS:PATHOUT_GPX :$PATHOUT_GPX";
+ vbm "STATUS:PATHOUT_KML :$PATHOUT_KML";
+ vbm "STATUS:BUFFER_TTL :$BUFFER_TTL";
+ vbm "STATUS:PATHOUT_BUFFER :$PATHOUT_BUFFER";
+ vbm "STATUS:timeBufferStart:$timeBufferStart";
+ vbm "FILEOUT_BASENAME :$FILEOUT_BASENAME";
+
+
+ # Validate PATHOUT_TAR as tar.
+ checkMakeTar "$PATHOUT_TAR";
+ ## Add VERSION file if checkMakeTar had to create a tar (exited 1) or replace one (exited 2)
+ vbm "exit status before magicWriteVersion:$?"
+ if [[ $? -eq 1 ]] || [[ $? -eq 2 ]]; then magicWriteVersion; fi
+
+ # Write bufferBash to PATHOUT_TAR
+ wait; # Wait to avoid collision with older magicWriteBuffer() instances (see https://www.tldp.org/LDP/abs/html/x9644.html )
+ appendFileTar "$PATHOUT_BUFFER" "$FILEOUT_NMEA" "$PATHOUT_TAR" "$DIR_TMP" "$CMD_CONV_NMEA" "$CMD_COMPRESS" "$CMD_ENCRYPT"; # Write NMEA data
+ appendFileTar "$PATHOUT_BUFFER" "$FILEOUT_GPX" "$PATHOUT_TAR" "$DIR_TMP" "$CMD_CONV_GPX" "$CMD_COMPRESS" "$CMD_ENCRYPT"; # Write GPX file
+ appendFileTar "$PATHOUT_BUFFER" "$FILEOUT_KML" "$PATHOUT_TAR" "$DIR_TMP" "$CMD_CONV_KML" "$CMD_COMPRESS" "$CMD_ENCRYPT"; # Write KML file
+
+ # Remove secured chunks from DIR_TMP
+ rm "$PATHOUT_BUFFER" "$PATHOUT_NMEA" "$PATHOUT_GPX" "$PATHOUT_KML";
+ vbm "DEBUG:STATUS:$FN:Finished magicGatherWriteBuffer().";
+} # write buffer to disk
+magicParseRecipientDir() {
+ # Desc: Updates recPubKeysValid with pubkeys in dir specified by '-R' option ("recipient directory")
+ # Inputs: vars: OPTION_RECDIR, argRecDir, OPTION_ENCRYPT
+ # arry: recPubKeysValid
+ # Outputs: arry: recPubKeysValid
+ # Depends: processArguments,
+ local recFileLine updateRecipients recipientDir
+ declare -a candRecPubKeysValid
+
+ # Check that '-e' and '-R' set
+ if [[ "$OPTION_ENCRYPT" = "true" ]] && [[ "$OPTION_RECDIR" = "true" ]]; then
+ ### Check that argRecDir is a directory.
+ if [[ -d "$argRecDir" ]]; then
+ recipientDir="$argRecDir" && vbm "STATUS:Recipient watch directory detected:\"$recipientDir\"";
+ #### Initialize variable indicating outcome of pubkey review
+ unset updateRecipients
+ #### Add existing recipients
+ candRecPubKeysValid=("${recPubKeysValidStatic[@]}");
+ #### Parse files in recipientDir
+ for file in "$recipientDir"/*; do
+ ##### Read first line of each file
+ recFileLine="$(head -n1 "$file")" && vbm "STATUS:Checking if pubkey:\"$recFileLine\"";
+ ##### check if first line is a valid pubkey
+ if checkAgePubkey "$recFileLine" && \
+ ( validateInput "$recFileLine" "ssh_pubkey" || validateInput "$recFileLine" "age_pubkey"); then
+ ###### T: add candidate pubkey to candRecPubKeysValid
+ candRecPubKeysValid+=("$recFileLine") && vbm "STATUS:RecDir pubkey is valid pubkey:\"$recFileLine\"";
+ else
+ ###### F: throw warning;
+ yell "ERROR:Invalid recipient file detected. Not modifying recipient list."
+ updateRecipients="false";
+ fi;
+ done
+ #### Write updated recPubKeysValid array to recPubKeysValid if no failure detected
+ if ! [[ "$updateRecipients" = "false" ]]; then
+ recPubKeysValid=("${candRecPubKeysValid[@]}") && vbm "STATUS:Wrote candRecPubkeysValid to recPubKeysValid:\"${recPubKeysValid[*]}\"";
+ fi;
+ else
+ yell "ERROR:$0:Recipient directory $argRecDir does not exist. Exiting."; exit 1;
+ fi;
+ fi;
+ # Handle case if '-R' set but '-e' not set
+ if [[ ! "$OPTION_ENCRYPT" = "true" ]] && [[ "$OPTION_RECDIR" = "true" ]]; then
+ yell "ERROR: \\'-R\\' is set but \\'-e\\' is not set."; fi;
+} # Update recPubKeysValid with argRecDir
+magicParseRecipientArgs() {
+ # Desc: Parses recipient arguments specified by '-r' option
+ # Input: vars: OPTION_ENCRYPT from processArguments()
+ # arry: argRecPubKeys from processArguments()
+ # Output: vars: CMD_ENCRYPT, CMD_ENCRYPT_SUFFIX
+ # arry: recPubKeysValid, recPubKeysValidStatic
+ # Depends: checkapp(), checkAgePubkey(), validateInput(), processArguments()
+ local recipients
+
+ # Check if encryption option active.
+ if [[ "$OPTION_ENCRYPT" = "true" ]] && [[ "$OPTION_RECIPIENTS" = "true" ]]; then
+ if checkapp age; then # Check that age is available.
+ for pubkey in "${argRecPubKeys[@]}"; do # Validate recipient pubkey strings by forming test message
+ vbm "DEBUG:Testing pubkey string:$pubkey";
+ if checkAgePubkey "$pubkey" && \
+ ( validateInput "$pubkey" "ssh_pubkey" || validateInput "$pubkey" "age_pubkey"); then
+ #### Form age recipient string
+ recipients="$recipients""-r '$pubkey' ";
+ vbm "STATUS:Added pubkey for forming age recipient string:""$pubkey";
+ vbm "DEBUG:recipients:""$recipients";
+ #### Add validated pubkey to recPubKeysValid array
+ recPubKeysValid+=("$pubkey") && vbm "DEBUG:recPubkeysValid:pubkey added:$pubkey";
+ else
+ yell "ERROR:Exit code ""$?"". Invalid recipient pubkey string. Exiting."; exit 1;
+ fi;
+ done
+ vbm "DEBUG:Finished processing argRecPubKeys array";
+ vbm "STATUS:Array of validated pubkeys:${recPubKeysValid[*]}";
+ recPubKeysValidStatic=("${recPubKeysValid[@]}"); # Save static image of pubkeys validated by this function
+
+ ## Form age command string
+ CMD_ENCRYPT="age ""$recipients " && vbm "CMD_ENCRYPT:$CMD_ENCRYPT";
+ CMD_ENCRYPT_SUFFIX=".age" && vbm "CMD_ENCRYPT_SUFFIX:$CMD_ENCRYPT_SUFFIX";
+ else
+ yell "ERROR:Encryption enabled but \"age\" not found. Exiting."; exit 1;
+ fi;
+ else
+ CMD_ENCRYPT="tee /dev/null " && vbm "CMD_ENCRYPT:$CMD_ENCRYPT";
+ CMD_ENCRYPT_SUFFIX="" && vbm "CMD_ENCRYPT_SUFFIX:$CMD_ENCRYPT_SUFFIX";
+ vbm "DEBUG:Encryption not enabled."
+ fi;
+ # Catch case if '-e' is set but '-r' or '-R' is not
+ if [[ "$OPTION_ENCRYPT" = "true" ]] && [[ ! "$OPTION_RECIPIENTS" = "true" ]]; then
+ yell "ERROR:\\'-e\\' set but no \\'-r\\' or \\'-R\\' set."; exit 1; fi;
+ # Catch case if '-r' or '-R' set but '-e' is not
+ if [[ ! "$OPTION_ENCRYPT" = "true" ]] && [[ "$OPTION_RECIPIENTS" = "true" ]]; then
+ yell "ERROR:\\'-r\\' or \\'-R\\' set but \\'-e\\' is not set."; exit 1; fi;
+} # Populate recPubKeysValid with argRecPubKeys; form encryption cmd string and filename suffix
+magicParseCompressionArg() {
+ # Desc: Parses compression arguments specified by '-c' option
+ # Input: vars: OPTION_COMPRESS
+ # Output: CMD_COMPRESS, CMD_COMPRESS_SUFFIX
+ # Depends: checkapp(), vbm(), gzip,
+ if [[ "$OPTION_COMPRESS" = "true" ]]; then # Check if compression option active
+ if checkapp gzip; then # Check if gzip available
+ CMD_COMPRESS="gzip " && vbm "CMD_COMPRESS:$CMD_COMPRESS";
+ CMD_COMPRESS_SUFFIX=".gz" && vbm "CMD_COMPRESS_SUFFIX:$CMD_COMPRESS_SUFFIX";
+ else
+ yell "ERROR:Compression enabled but \"gzip\" not found. Exiting."; exit 1;
+ fi
+ else
+ CMD_COMPRESS="tee /dev/null " && vbm "CMD_COMPRESS:$CMD_COMPRESS";
+ CMD_COMPRESS_SUFFIX="" && vbm "CMD_COMPRESS_SUFFIX:$CMD_COMPRESS_SUFFIX";
+ vbm "DEBUG:Compression not enabled.";
+ fi
+} # Form compression cmd string and filename suffix
+magicInitWorkingDir() {
+ # Desc: Determine temporary working directory from defaults or user input
+ # Usage: magicInitWorkignDir
+ # Input: vars: OPTION_TEMPDIR, argTempDirPriority, DIR_TMP_DEFAULT
+ # Input: vars: SCRIPT_TIME_START
+ # Output: vars: DIR_TMP
+ # Depends: processArguments(), vbm(), yell()
+ # Parse '-t' option (user-specified temporary working dir)
+ ## Set DIR_TMP_PARENT to user-specified value if specified
+ local DIR_TMP_PARENT
+
+ if [[ "$OPTION_TMPDIR" = "true" ]]; then
+ if [[ -d "$argTempDirPriority" ]]; then
+ DIR_TMP_PARENT="$argTempDirPriority";
+ else
+ yell "WARNING:Specified temporary working directory not valid:$argTempDirPriority";
+ exit 1; # Exit since user requires a specific temp dir and it is not available.
+ fi;
+ else
+ ## Set DIR_TMP_PARENT to default or fallback otherwise
+ if [[ -d "$DIR_TMP_DEFAULT" ]]; then
+ DIR_TMP_PARENT="$DIR_TMP_DEFAULT";
+ elif [[ -d /tmp ]]; then
+ yell "WARNING:$DIR_TMP_DEFAULT not available. Falling back to /tmp .";
+ DIR_TMP_PARENT="/tmp";
+ else
+ yell "ERROR:No valid working directory available. Exiting.";
+ exit 1;
+ fi
+ fi;
+ ## Set DIR_TMP using DIR_TMP_PARENT and nonce (SCRIPT_TIME_START)
+ DIR_TMP="$DIR_TMP_PARENT"/"$SCRIPT_TIME_START""..bkgpslog" && vbm "DEBUG:Set DIR_TMP to:$DIR_TMP"; # Note: removed at end of main().
+} # Sets working dir
+magicParseCustomTTL() {
+ # Desc: Set user-specified TTLs for buffer and script
+ # Input: vars: argCustomBufferTTL (integer), argCustomScriptTTL_TE (string)
+ # Input: vars: OPTION_CUSTOM_BUFFERTTL, OPTION_CUSTOM_SCRIPTTTL
+ # Input: vars: BUFFER_TTL (integer), SCRIPT_TTL_TE (string)
+ # Output: BUFFER_TTL (integer), SCRIPT_TTL_TE (string)
+ # Depends validateInput(), showUsage(), yell
+
+ # React to '-b, --buffer-ttl' option
+ if [[ "$OPTION_CUSTOM_BUFFERTTL" = "true" ]]; then
+ ## T: Check if argCustomBufferTTL is an integer
+ if validateInput "$argCustomBufferTTL" "integer"; then
+ ### T: argCustomBufferTTL is an integer
+ BUFFER_TTL="$argCustomBufferTTL" && vbm "Custom BUFFER_TTL from -b:$BUFFER_TTL";
+ else
+ ### F: argcustomBufferTTL is not an integer
+ yell "ERROR:Invalid integer argument for custom buffer time-to-live."; showUsage; exit 1;
+ fi;
+ ## F: do not change BUFFER_TTL
+ fi;
+
+ # React to '-B, --script-ttl' option
+ if [[ "$OPTION_CUSTOM_SCRIPTTTL_TE" = "true" ]]; then
+ ## T: Check if argCustomScriptTTL is a time element (ex: "day", "hour")
+ if validateInput "$argCustomScriptTTL" "time_element"; then
+ ### T: argCustomScriptTTL is a time element
+ SCRIPT_TTL_TE="$argCustomScriptTTL" && vbm "Custom SCRIPT_TTL_TE from -B:$SCRIPT_TTL_TE";
+ else
+ ### F: argcustomScriptTTL is not a time element
+ yell "ERROR:Invalid time element argument for custom script time-to-live."; showUsage; exit 1;
+ fi;
+ ## F: do not change SCRIPT_TTL_TE
+ fi;
+} # Sets custom script or buffer TTL if specified
+
+
+main() {
+ # DEBUG: Print environment variables
+ vbm "echo $(printenv)";
+ # Process arguments
+ processArguments "$@";
+ ## Act upon arguments
+ ### Determine working directory
+ magicInitWorkingDir; # Sets DIR_TMP from argTempDirPriority
+ ### Set output encryption and compression option strings
+ #### React to "-r" ("encryption recipients") option
+ magicParseRecipientArgs; # Updates recPubKeysValid, CMD_ENCRYPT[_SUFFIX] from argRecPubKeys
+ #### React to "-c" ("compression") option
+ magicParseCompressionArg; # Updates CMD_COMPRESS[_SUFFIX]
+ #### React to "-R" ("recipient directory") option
+ magicParseRecipientDir; # Updates recPubKeysValid
+ #### React to custom buffer and script TTL options ("-b", "-B")
+ magicParseCustomTTL; # Sets custom SCRIPT_TTL_TE and/or BUFFER_TTL if specified
+
+ # Check that critical apps and dirs are available, display missing ones.
+ if ! checkapp gpspipe tar && ! checkdir "$DIR_OUT" "DIR_TMP"; then
+ yell "ERROR:Critical components missing.";
+ displayMissing; yell "Exiting."; exit 1; fi
+
+ # Set script lifespan (SCRIPT_TTL from SCRIPT_TTL_TE)
+ magicSetScriptTTL "$SCRIPT_TTL_TE";
+ ## Note: SCRIPT_TTL_TE is time element string (ex: "day") while SCRIPT_TTL is integer seconds
+
+ # File name substring (ISO-8601 duration from BUFFER_TTL)
+ bufferTTL_STR="$(timeDuration "$BUFFER_TTL")";
+
+ # Init temp working dir
+ try mkdir "$DIR_TMP" && vbm "DEBUG:Working dir creatd at:$DIR_TMP";
+
+ # Initialize 'tar' archive
+ ## Define output tar path (note: each day gets *one* tar file (Ex: "20200731..hostname_location.[.gpx.gz].tar"))
+ PATHOUT_TAR="$DIR_OUT"/"$(dateShort)".."$SCRIPT_HOSTNAME""_location""$CMD_COMPRESS_SUFFIX""$CMD_ENCRYPT_SUFFIX".tar && \
+ vbm "STATUS:Set PATHOUT_TAR to:$PATHOUT_TAR";
+ ## Check that PATHOUT_TAR is a tar. Rename old and create empty one otherwise.
+ checkMakeTar "$PATHOUT_TAR" && vbm "DEBUG:Confirmed or Created to be a tar:$PATHOUT_TAR";
+ ## Append VERSION file to PATHOUT_TAR
+ magicWriteVersion;
+
+ # Define GPS conversion commands
+ CMD_CONV_NMEA="tee /dev/null " && vbm "STATUS:Set CMD_CONV_NMEA to:$CMD_CONV_NMEA"; # tee as passthrough
+ CMD_CONV_GPX="gpsbabel -i nmea -f - -o gpx -F - " && vbm "STATUS:Set CMD_CONV_GPX to:$CMD_CONV_GPX"; # convert NMEA to GPX
+ CMD_CONV_KML="gpsbabel -i nmea -f - -o kml -F - " && vbm "STATUS:Set CMD_CONV_KML to:$CMD_CONV_KML"; # convert NMEA to KML
+
+ # MAIN LOOP:Record gps data until script lifespan ends
+ timeBufferFirstNS="$(timeEpochNS)"; bufferRound=0; BUFFER_TTL_ADJ_FLOAT="$BUFFER_TTL";
+ while [[ "$SECONDS" -lt "$SCRIPT_TTL" ]]; do
+ magicParseRecipientDir;
+ magicGatherWriteBuffer &
+ sleep "$BUFFER_TTL_ADJ_FLOAT"; # adjusted by magicBufferSleepPID
+ ((bufferRound++));
+ magicBufferSleepPID; # Calculates BUFFER_TTL_ADJ_FLOAT from BUFFER_TTL given buffer expected start time vs. actual
+ done
+
+ # Cleanup
+ ## Remove DIR_TMP
+ try rm -r "$DIR_TMP";
+
+ vbm "STATUS:Main function finished.";
projects / EVA-2020-02.git / blobdiff