From 18c9ae73f4dd170a69df03822193c3044f68f194 Mon Sep 17 00:00:00 2001
From: Phil Howard <phil@gadgetoid.com>
Date: Tue, 17 Sep 2019 11:52:42 +0100
Subject: [PATCH] Tidy up noise examples

---
 examples/noise-amps-at-freqs.py | 19 +++++++++++--------
 examples/noise-profile.py       | 11 ++++++-----
 2 files changed, 17 insertions(+), 13 deletions(-)
 mode change 100644 => 100755 examples/noise-amps-at-freqs.py
 mode change 100644 => 100755 examples/noise-profile.py

diff --git a/examples/noise-amps-at-freqs.py b/examples/noise-amps-at-freqs.py
old mode 100644
new mode 100755
index 0a8040b..8b1ddd5
--- a/examples/noise-amps-at-freqs.py
+++ b/examples/noise-amps-at-freqs.py
@@ -2,11 +2,15 @@ import ST7735
 from PIL import Image, ImageDraw
 from enviroplus.noise import Noise
 
-SAMPLERATE = 16000
+print("""noise-amps-at-freqs.py - Measure amplitude from specific frequency bins
 
-FREQ_LOW = 100.0
-FREQ_HIGH = 2000.0
-WIDTH = 100
+This example retrieves the median amplitude from 3 user-specified frequency ranges and plots them in Blue, Green and Red on the Enviro+ display.
+
+As you play a continuous rising tone on your phone, you should notice peaks that correspond to the frequency entering each range.
+
+Press Ctrl+C to exit!
+
+""")
 
 noise = Noise()
 
@@ -25,9 +29,9 @@ draw = ImageDraw.Draw(img)
 
 while True:
     amps = noise.get_amplitudes_at_frequency_ranges([
-        (100,200),
-        (500,600),
-        (1000,1200)
+        (100, 200),
+        (500, 600),
+        (1000, 1200)
     ])
     amps = [n * 32 for n in amps]
     img2 = img.copy()
@@ -38,4 +42,3 @@ while True:
     draw.line((0, 0, 0, amps[2]), fill=(255, 0, 0))
 
     disp.display(img)
-
diff --git a/examples/noise-profile.py b/examples/noise-profile.py
old mode 100644
new mode 100755
index 70aa6ab..964dead
--- a/examples/noise-profile.py
+++ b/examples/noise-profile.py
@@ -2,11 +2,13 @@ import ST7735
 from PIL import Image, ImageDraw
 from enviroplus.noise import Noise
 
-SAMPLERATE = 16000
+print("""noise-profile.py - Get a simple noise profile.
 
-FREQ_LOW = 100.0
-FREQ_HIGH = 2000.0
-WIDTH = 100
+This example grabs a basic 3-bin noise profile of low, medium and high frequency noise, plotting the noise characteristics as coloured bars.
+
+Press Ctrl+C to exit!
+
+""")
 
 noise = Noise()
 
@@ -36,4 +38,3 @@ while True:
     draw.line((0, 0, 0, amp), fill=(int(low), int(mid), int(high)))
 
     disp.display(img)
-
-- 
2.30.2