From: Sam Birch Date: Mon, 9 Dec 2019 08:55:42 +0000 (+1300) Subject: Remove inappropriate sleep between reads X-Git-Url: https://zdv2.bktei.com/gitweb/EVA-2020-02-2.git/commitdiff_plain/f9d69568aec8773d9541809f6cd22d44b0197431?ds=inline;hp=655d013499ca1b98a9d28884c7a8c2607972f09e Remove inappropriate sleep between reads The PMS5003 seems to buffer unread samples. If you are reading at a lower rate than it takes readings, then a progressively larger delay will occur between changes in actual PM levels and indicated PM levels. To see the issue: 1) run this example with the `time.sleep(1)` *included* 2) wait a few minutes 3) burn a piece of paper near the sensor and wait for the reported PM levels to spike With the sleep included, there is a delay between introducing smoke and seeing reported levels rise (often a few minutes or longer). With the sleep removed you will see reported levels update almost immediately. The correct way to use the sensor is to read as fast as the sensor allows, and not make any assumptions about what rate samples will be published at --- diff --git a/examples/particulates.py b/examples/particulates.py index 9aa9c37..c1b3c67 100755 --- a/examples/particulates.py +++ b/examples/particulates.py @@ -23,7 +23,6 @@ try: try: readings = pms5003.read() logging.info(readings) - time.sleep(1.0) except ReadTimeoutError: pms5003 = PMS5003() except KeyboardInterrupt: