From: Phil Howard <phil@gadgetoid.com>
Date: Thu, 13 Jun 2019 09:15:10 +0000 (+0100)
Subject: Updated install/uninstall scripts
X-Git-Url: https://zdv2.bktei.com/gitweb/EVA-2020-02-2.git/commitdiff_plain/d7ce2531a8271e2110535ddc383130590e6142bb?hp=-c

Updated install/uninstall scripts
---

d7ce2531a8271e2110535ddc383130590e6142bb
diff --git a/install.sh b/install.sh
index 1205c0c..c1d36d6 100755
--- a/install.sh
+++ b/install.sh
@@ -2,6 +2,8 @@
 
 LIBRARY_VERSION=`cat library/setup.py | grep version | awk -F"'" '{print $2}'`
 LIBRARY_NAME=`cat library/setup.py | grep name | awk -F"'" '{print $2}'`
+CONFIG=/boot/config.txt
+DATESTAMP=`date "+%Y-%M-%d-%H-%M-%S"`
 
 printf "$LIBRARY_NAME $LIBRARY_VERSION Python Library: Installer\n\n"
 
@@ -22,4 +24,18 @@ fi
 
 cd ..
 
+printf "Backing up $CONFIG\n"
+cp $CONFIG "config.preinstall-$DATESTAMP.txt"
+
+printf "Setting up serial for PMS5003..\n"
+# Disable serial terminal over /dev/ttyAMA0
+raspi-config nonint do_serial 1
+# Enable serial port
+raspi-config nonint set_config_var enable_uart 1 $CONFIG
+# Switch serial port to full UART for stability (may adversely affect bluetooth)
+sed -i 's/^#dtoverlay=pi3-miniuart-bt/dtoverlay=pi3-miniuart-bt/' $CONFIG
+if ! grep -q -E "^dtoverlay=pi3-miniuart-bt" $CONFIG; then
+	printf "dtoverlay=pi3-miniuart-bt\n" >> $CONFIG
+fi
+
 printf "Done!\n"
diff --git a/uninstall.sh b/uninstall.sh
index 0709cc0..aaac11b 100755
--- a/uninstall.sh
+++ b/uninstall.sh
@@ -22,4 +22,12 @@ fi
 
 cd ..
 
+printf "Disabling serial..\n"
+# Enable serial terminal over /dev/ttyAMA0
+raspi-config nonint do_serial 0
+# Disable serial port
+raspi-config nonint set_config_var enable_uart 0 /boot/config.txt
+# Switch serial port back to miniUART
+sed -i 's/^dtoverlay=pi3-miniuart-bt/#dtoverlay=pi3-miniuart-bt/' /boot/config.txt
+
 printf "Done!\n"