From: Phil Howard Date: Wed, 3 Jul 2019 12:29:31 +0000 (+0100) Subject: Update README install instructions X-Git-Url: https://zdv2.bktei.com/gitweb/EVA-2020-02-2.git/commitdiff_plain/a862bb9473fbe8ec4a3b62d1e9b6f7a967b337ee?hp=-c Update README install instructions --- a862bb9473fbe8ec4a3b62d1e9b6f7a967b337ee diff --git a/README.md b/README.md index 07923f5..adb7dbe 100644 --- a/README.md +++ b/README.md @@ -7,15 +7,41 @@ # Installing -Stable library from PyPi: +You're best using the git clone / install.sh method if you want all of the UART serial configuration for the PMS5003 particulate matter sensor to run automatically. -* Just run `sudo pip install enviroplus` +## One-line (Installs from GitHub) -(**Note** that you're best using the git clone / install.sh method below if you want all of the UART serial configuration for the PMS5003 particulate matter sensor to run automatically) +``` +curl -sSL https://get.pimoroni.com/enviroplus | bash +``` -Latest/development library from GitHub: +**Note** report issues with one-line installer here: https://github.com/pimoroni/get + +## Or... Install and configure dependencies from GitHub: * `git clone https://github.com/pimoroni/enviroplus-python` * `cd enviroplus-python` * `sudo ./install.sh` +**Note** Raspbian Lite users may first need to install git: `sudo apt install git` + +## Or... Install from PyPi and configure manually: + +* Run `sudo pip install enviroplus` + +**Note** this wont perform any of the required configuration changes on your Pi, you may additionally need to: + +* Enable i2c: `raspi-config nonint do_i2c 0` +* Enable SPI: `raspi-config nonint do_spi 0` + +And if you're using a PMS5003 sensor you will need to: + +* Enable serial: `raspi-config nonint set_config_var enable_uart 1 /boot/config.txt` +* Disable serial terminal: `sudo raspi-config nonint do_serial 1` +* Add `dtoverlay=pi3-miniuart-bt` to your `/boot/config.txt` + +And install additional dependencies: + +``` +sudo apt install python-numpy python-smbus +```