X-Git-Url: https://zdv2.bktei.com/gitweb/EVA-2020-02-2.git/blobdiff_plain/de465d8563bb6c9a7e934d34fb5c4aaa51226f6f..8c9d06156f0e0d66163a16acc2f6c5d42812b5f0:/README.md

diff --git a/README.md b/README.md
index 288aa46..5fb9fe6 100644
--- a/README.md
+++ b/README.md
@@ -1,19 +1,55 @@
-# {{TITLE}}
+# Enviro+
 
-[![Build Status](https://travis-ci.com/pimoroni/{{LIBNAME}}-python.svg?branch=master)](https://travis-ci.com/pimoroni/{{LIBNAME}}-python)
-[![Coverage Status](https://coveralls.io/repos/github/pimoroni/{{LIBNAME}}-python/badge.svg?branch=master)](https://coveralls.io/github/pimoroni/{{LIBNAME}}-python?branch=master)
-[![PyPi Package](https://img.shields.io/pypi/v/{{LIBNAME}}.svg)](https://pypi.python.org/pypi/{{LIBNAME}})
-[![Python Versions](https://img.shields.io/pypi/pyversions/{{LIBNAME}}.svg)](https://pypi.python.org/pypi/{{LIBNAME}})
+Designed for environmental monitoring, Enviro+ lets you measure air quality (pollutant gases and particulates), temperature, pressure, humidity, light, and noise level. Learn more - https://shop.pimoroni.com/products/enviro-plus
+
+[![Build Status](https://travis-ci.com/pimoroni/enviroplus-python.svg?branch=master)](https://travis-ci.com/pimoroni/enviroplus-python)
+[![Coverage Status](https://coveralls.io/repos/github/pimoroni/enviroplus-python/badge.svg?branch=master)](https://coveralls.io/github/pimoroni/enviroplus-python?branch=master)
+[![PyPi Package](https://img.shields.io/pypi/v/enviroplus.svg)](https://pypi.python.org/pypi/enviroplus)
+[![Python Versions](https://img.shields.io/pypi/pyversions/enviroplus.svg)](https://pypi.python.org/pypi/enviroplus)
 
 # Installing
 
-Stable library from PyPi:
+You're best using the "One-line" install method if you want all of the UART serial configuration for the PMS5003 particulate matter sensor to run automatically.
+
+## One-line (Installs from GitHub)
 
-* Just run `sudo pip install {{LIBNAME}}`
+```
+curl -sSL https://get.pimoroni.com/enviroplus | bash
+```
 
-Latest/development library from GitHub:
+**Note** report issues with one-line installer here: https://github.com/pimoroni/get
 
-* `git clone https://github.com/pimoroni/{{LIBNAME}}-python`
-* `cd {{LIBNAME}}-python`
+## Or... Install and configure dependencies from GitHub:
+
+* `git clone https://github.com/pimoroni/enviroplus-python`
+* `cd enviroplus-python`
 * `sudo ./install.sh`
 
+**Note** Raspbian Lite users may first need to install git: `sudo apt install git`
+
+## Or... Install from PyPi and configure manually:
+
+* Run `sudo pip install enviroplus`
+
+**Note** this wont perform any of the required configuration changes on your Pi, you may additionally need to:
+
+* Enable i2c: `raspi-config nonint do_i2c 0`
+* Enable SPI: `raspi-config nonint do_spi 0`
+
+And if you're using a PMS5003 sensor you will need to:
+
+* Enable serial: `raspi-config nonint set_config_var enable_uart 1 /boot/config.txt`
+* Disable serial terminal: `sudo raspi-config nonint do_serial 1`
+* Add `dtoverlay=pi3-miniuart-bt` to your `/boot/config.txt`
+
+And install additional dependencies:
+
+```
+sudo apt install python-numpy python-smbus python-pil python-setuptools
+```
+
+## Help & Support
+
+* GPIO Pinout - https://pinout.xyz/pinout/enviro_plus
+* Support forums - http://forums.pimoroni.com/c/support
+* Discord - https://discord.gg/hr93ByC