X-Git-Url: https://zdv2.bktei.com/gitweb/EVA-2020-02-2.git/blobdiff_plain/3547bf15f463ff469e6e2e4ea6940b3066cb41da..eba03e3f2ea5a98a2e7bae4d229e0117fe619d9a:/README.md

diff --git a/README.md b/README.md
index afdf462..4bce5f5 100644
--- a/README.md
+++ b/README.md
@@ -1,19 +1,70 @@
-# Enviro pHAT Plus
+# Enviro+ 
 
-[![Build Status](https://travis-ci.com/pimoroni/envirophatplus-python.svg?branch=master)](https://travis-ci.com/pimoroni/envirophatplus-python)
-[![Coverage Status](https://coveralls.io/repos/github/pimoroni/envirophatplus-python/badge.svg?branch=master)](https://coveralls.io/github/pimoroni/envirophatplus-python?branch=master)
-[![PyPi Package](https://img.shields.io/pypi/v/envirophatplus.svg)](https://pypi.python.org/pypi/envirophatplus)
-[![Python Versions](https://img.shields.io/pypi/pyversions/envirophatplus.svg)](https://pypi.python.org/pypi/envirophatplus)
+Designed for environmental monitoring, Enviro+ lets you measure air quality (pollutant gases and particulates), temperature, pressure, humidity, light, and noise level. Learn more - https://shop.pimoroni.com/products/enviro-plus
+
+
+[![Build Status](https://travis-ci.com/pimoroni/enviroplus-python.svg?branch=master)](https://travis-ci.com/pimoroni/enviroplus-python)
+[![Coverage Status](https://coveralls.io/repos/github/pimoroni/enviroplus-python/badge.svg?branch=master)](https://coveralls.io/github/pimoroni/enviroplus-python?branch=master)
+[![PyPi Package](https://img.shields.io/pypi/v/enviroplus.svg)](https://pypi.python.org/pypi/enviroplus)
+[![Python Versions](https://img.shields.io/pypi/pyversions/enviroplus.svg)](https://pypi.python.org/pypi/enviroplus)
 
 # Installing
 
-Stable library from PyPi:
+You're best using the "One-line" install method if you want all of the UART serial configuration for the PMS5003 particulate matter sensor to run automatically.
+
+**Note** The code in this repository supports both the Enviro+ and Enviro Mini boards. _The Enviro Mini board does not have the Gas sensor or the breakout for the PM sensor._
+
+![Enviro Plus pHAT](./Enviro-Plus-pHAT.jpg)
+![Enviro Mini pHAT](./Enviro-mini-pHAT.jpg)
+
+## One-line (Installs from GitHub)
 
-* Just run `sudo pip install envirophatplus`
+```
+curl -sSL https://get.pimoroni.com/enviroplus | bash
+```
 
-Latest/development library from GitHub:
+**Note** report issues with one-line installer here: https://github.com/pimoroni/get
 
-* `git clone https://github.com/pimoroni/envirophatplus-python`
-* `cd envirophatplus-python`
+## Or... Install and configure dependencies from GitHub:
+
+* `git clone https://github.com/pimoroni/enviroplus-python`
+* `cd enviroplus-python`
 * `sudo ./install.sh`
 
+**Note** Raspbian Lite users may first need to install git: `sudo apt install git`
+
+## Or... Install from PyPi and configure manually:
+
+* Run `sudo pip install enviroplus`
+
+**Note** this wont perform any of the required configuration changes on your Pi, you may additionally need to:
+
+* Enable i2c: `raspi-config nonint do_i2c 0`
+* Enable SPI: `raspi-config nonint do_spi 0`
+
+And if you're using a PMS5003 sensor you will need to:
+
+* Enable serial: `raspi-config nonint set_config_var enable_uart 1 /boot/config.txt`
+* Disable serial terminal: `sudo raspi-config nonint do_serial 1`
+* Add `dtoverlay=pi3-miniuart-bt` to your `/boot/config.txt`
+
+And install additional dependencies:
+
+```
+sudo apt install python-numpy python-smbus python-pil python-setuptools
+```
+
+## Alternate Software & User Projects
+
+* enviro monitor - https://github.com/roscoe81/enviro-monitor
+* mqtt-all - https://github.com/robmarkcole/rpi-enviro-mqtt - now upstream: [see examples/mqtt-all.py](examples/mqtt-all.py)
+* adafruit_io.py - https://github.com/dedSyn4ps3/enviroplus-python/blob/master/examples/adafruit_io.py - uses Adafruit Blinka and BME280 libraries to publish to Adafruit IO
+* enviroplus_exporter - https://github.com/tijmenvandenbrink/enviroplus_exporter - Prometheus exporter (with added support for Luftdaten and InfluxDB Cloud)
+* homekit-enviroplus - https://github.com/sighmon/homekit-enviroplus - An Apple HomeKit accessory for the Pimoroni Enviro+
+* go-enviroplus - https://github.com/rubiojr/go-enviroplus - Go modules to read Enviro+ sensors
+
+## Help & Support
+
+* GPIO Pinout - https://pinout.xyz/pinout/enviro_plus
+* Support forums - http://forums.pimoroni.com/c/support
+* Discord - https://discord.gg/hr93ByC