fix(examples):Add delay to throw away bad initial sensor reading

[EVA-2020-02-2.git] / examples / noise-amps-at-freqs.py

diff --git a/examples/noise-amps-at-freqs.py b/examples/noise-amps-at-freqs.py
old mode 100644 (file)
new mode 100755 (executable)
index 0a8040b..4c14c58
--- a/examples/noise-amps-at-freqs.py
+++ b/examples/noise-amps-at-freqs.py
@@ -2,20 +2,24 @@ import ST7735
 from PIL import Image, ImageDraw
 from enviroplus.noise import Noise
 
 from PIL import Image, ImageDraw
 from enviroplus.noise import Noise
 

-SAMPLERATE = 16000
+print("""noise-amps-at-freqs.py - Measure amplitude from specific frequency bins

 
 

-FREQ_LOW = 100.0
-FREQ_HIGH = 2000.0
-WIDTH = 100
+This example retrieves the median amplitude from 3 user-specified frequency ranges and plots them in Blue, Green and Red on the Enviro+ display.
+
+As you play a continuous rising tone on your phone, you should notice peaks that correspond to the frequency entering each range.
+
+Press Ctrl+C to exit!
+
+""")

 
 noise = Noise()
 
 disp = ST7735.ST7735(
 
 noise = Noise()
 
 disp = ST7735.ST7735(

-        port=0,
-        cs=ST7735.BG_SPI_CS_FRONT,
-        dc=9,
-        backlight=12,
-        rotation=90)
+    port=0,
+    cs=ST7735.BG_SPI_CS_FRONT,
+    dc=9,
+    backlight=12,
+    rotation=90)

 
 disp.begin()
 
 
 disp.begin()
 


@@ -25,9 +29,9 @@ draw = ImageDraw.Draw(img)
 
 while True:
     amps = noise.get_amplitudes_at_frequency_ranges([
 
 while True:
     amps = noise.get_amplitudes_at_frequency_ranges([

-        (100,200),
-        (500,600),
-        (1000,1200)
+        (100, 200),
+        (500, 600),
+        (1000, 1200)

     ])
     amps = [n * 32 for n in amps]
     img2 = img.copy()
     ])
     amps = [n * 32 for n in amps]
     img2 = img.copy()


@@ -38,4 +42,3 @@ while True:
     draw.line((0, 0, 0, amps[2]), fill=(255, 0, 0))
 
     disp.display(img)
     draw.line((0, 0, 0, amps[2]), fill=(255, 0, 0))
 
     disp.display(img)

-