Added user projects section to README

[EVA-2020-02-2.git] / README.md

diff --git a/README.md b/README.md
index adb7dbe26190e8cd57f95a90dcaa66076053bb41..bcb1aa615471b4f3367bf535e669829e24a60659 100644 (file)
--- a/README.md
+++ b/README.md
@@ -1,4 +1,7 @@
-# Enviro+ pHAT
+# Enviro+ 
+
+Designed for environmental monitoring, Enviro+ lets you measure air quality (pollutant gases and particulates), temperature, pressure, humidity, light, and noise level. Learn more - https://shop.pimoroni.com/products/enviro-plus
+

 
 [![Build Status](https://travis-ci.com/pimoroni/enviroplus-python.svg?branch=master)](https://travis-ci.com/pimoroni/enviroplus-python)
 [![Coverage Status](https://coveralls.io/repos/github/pimoroni/enviroplus-python/badge.svg?branch=master)](https://coveralls.io/github/pimoroni/enviroplus-python?branch=master)
 
 [![Build Status](https://travis-ci.com/pimoroni/enviroplus-python.svg?branch=master)](https://travis-ci.com/pimoroni/enviroplus-python)
 [![Coverage Status](https://coveralls.io/repos/github/pimoroni/enviroplus-python/badge.svg?branch=master)](https://coveralls.io/github/pimoroni/enviroplus-python?branch=master)


@@ -7,7 +10,12 @@
 
 # Installing
 
 
 # Installing
 

-You're best using the git clone / install.sh method if you want all of the UART serial configuration for the PMS5003 particulate matter sensor to run automatically.
+You're best using the "One-line" install method if you want all of the UART serial configuration for the PMS5003 particulate matter sensor to run automatically.
+
+**Note** The code in this repository supports both the Enviro+ and Enviro Mini boards. _The Enviro Mini board does not have the Gas sensor or the breakout for the PM sensor._
+
+![Enviro Plus pHAT](./Enviro-Plus-pHAT.jpg)
+![Enviro Mini pHAT](./Enviro-mini-pHAT.jpg)

 
 ## One-line (Installs from GitHub)
 
 
 ## One-line (Installs from GitHub)
 


@@ -43,5 +51,17 @@ And if you're using a PMS5003 sensor you will need to:
 And install additional dependencies:
 
 ```
 And install additional dependencies:
 
 ```

-sudo apt install python-numpy python-smbus
+sudo apt install python-numpy python-smbus python-pil python-setuptools

 ```
 ```

+
+## Alternate Software & User Projects
+
+* enviro monitor - https://github.com/roscoe81/enviro-monitor
+* mqtt-all - https://github.com/robmarkcole/rpi-enviro-mqtt - now upstream: [see examples/mqtt-all.py](examples/mqtt-all.py)
+* adafruit_io.py - https://github.com/dedSyn4ps3/enviroplus-python/blob/master/examples/adafruit_io.py - uses Adafruit Blinka and BME280 libraries to publish to Adafruit IO
+
+## Help & Support
+
+* GPIO Pinout - https://pinout.xyz/pinout/enviro_plus
+* Support forums - http://forums.pimoroni.com/c/support
+* Discord - https://discord.gg/hr93ByC