fix(examples):Add delay to throw away bad initial sensor reading

[EVA-2020-02-2.git] / README.md

diff --git a/README.md b/README.md
index ebc4f93a39ae0539c556a97843b0cc942913c3dd..4bce5f5be29521f737b408b5cdc49070fa86da5c 100644 (file)
--- a/README.md
+++ b/README.md
@@ -1,7 +1,8 @@
-# Enviro+
+# Enviro+ 
 
 Designed for environmental monitoring, Enviro+ lets you measure air quality (pollutant gases and particulates), temperature, pressure, humidity, light, and noise level. Learn more - https://shop.pimoroni.com/products/enviro-plus
 
+
 [![Build Status](https://travis-ci.com/pimoroni/enviroplus-python.svg?branch=master)](https://travis-ci.com/pimoroni/enviroplus-python)
 [![Coverage Status](https://coveralls.io/repos/github/pimoroni/enviroplus-python/badge.svg?branch=master)](https://coveralls.io/github/pimoroni/enviroplus-python?branch=master)
 [![PyPi Package](https://img.shields.io/pypi/v/enviroplus.svg)](https://pypi.python.org/pypi/enviroplus)
@@ -9,7 +10,12 @@ Designed for environmental monitoring, Enviro+ lets you measure air quality (pol
 
 # Installing
 
-You're best using the git clone / install.sh method if you want all of the UART serial configuration for the PMS5003 particulate matter sensor to run automatically.
+You're best using the "One-line" install method if you want all of the UART serial configuration for the PMS5003 particulate matter sensor to run automatically.
+
+**Note** The code in this repository supports both the Enviro+ and Enviro Mini boards. _The Enviro Mini board does not have the Gas sensor or the breakout for the PM sensor._
+
+![Enviro Plus pHAT](./Enviro-Plus-pHAT.jpg)
+![Enviro Mini pHAT](./Enviro-mini-pHAT.jpg)
 
 ## One-line (Installs from GitHub)
 
@@ -45,9 +51,18 @@ And if you're using a PMS5003 sensor you will need to:
 And install additional dependencies:
 
 ```
-sudo apt install python-numpy python-smbus
+sudo apt install python-numpy python-smbus python-pil python-setuptools
 ```
 
+## Alternate Software & User Projects
+
+* enviro monitor - https://github.com/roscoe81/enviro-monitor
+* mqtt-all - https://github.com/robmarkcole/rpi-enviro-mqtt - now upstream: [see examples/mqtt-all.py](examples/mqtt-all.py)
+* adafruit_io.py - https://github.com/dedSyn4ps3/enviroplus-python/blob/master/examples/adafruit_io.py - uses Adafruit Blinka and BME280 libraries to publish to Adafruit IO
+* enviroplus_exporter - https://github.com/tijmenvandenbrink/enviroplus_exporter - Prometheus exporter (with added support for Luftdaten and InfluxDB Cloud)
+* homekit-enviroplus - https://github.com/sighmon/homekit-enviroplus - An Apple HomeKit accessory for the Pimoroni Enviro+
+* go-enviroplus - https://github.com/rubiojr/go-enviroplus - Go modules to read Enviro+ sensors
+
 ## Help & Support
 
 * GPIO Pinout - https://pinout.xyz/pinout/enviro_plus