-.. |Build Status| image:: https://travis-ci.com/pimoroni/envirophatplus-python.svg?branch=master
- :target: https://travis-ci.com/pimoroni/envirophatplus-python
-.. |Coverage Status| image:: https://coveralls.io/repos/github/pimoroni/envirophatplus-python/badge.svg?branch=master
- :target: https://coveralls.io/github/pimoroni/envirophatplus-python?branch=master
-.. |PyPi Package| image:: https://img.shields.io/pypi/v/envirophatplus.svg
- :target: https://pypi.python.org/pypi/envirophatplus
-.. |Python Versions| image:: https://img.shields.io/pypi/pyversions/envirophatplus.svg
- :target: https://pypi.python.org/pypi/envirophatplus
+**Note** Raspbian Lite users may first need to install git:
+``sudo apt install git``
+
+Or... Install from PyPi and configure manually:
+-----------------------------------------------
+
+- Run ``sudo pip install enviroplus``
+
+**Note** this wont perform any of the required configuration changes on
+your Pi, you may additionally need to:
+
+- Enable i2c: ``raspi-config nonint do_i2c 0``
+- Enable SPI: ``raspi-config nonint do_spi 0``
+
+And if you're using a PMS5003 sensor you will need to:
+
+- Enable serial:
+ ``raspi-config nonint set_config_var enable_uart 1 /boot/config.txt``
+- Disable serial terminal: ``sudo raspi-config nonint do_serial 1``
+- Add ``dtoverlay=pi3-miniuart-bt`` to your ``/boot/config.txt``
+
+And install additional dependencies:
+
+::
+
+ sudo apt install python-numpy python-smbus python-pil python-setuptools
+
+Help & Support
+--------------
+
+- GPIO Pinout - https://pinout.xyz/pinout/enviro\_plus
+- Support forums - http://forums.pimoroni.com/c/support
+- Discord - https://discord.gg/hr93ByC
+
+.. |Build Status| image:: https://travis-ci.com/pimoroni/enviroplus-python.svg?branch=master
+ :target: https://travis-ci.com/pimoroni/enviroplus-python
+.. |Coverage Status| image:: https://coveralls.io/repos/github/pimoroni/enviroplus-python/badge.svg?branch=master
+ :target: https://coveralls.io/github/pimoroni/enviroplus-python?branch=master
+.. |PyPi Package| image:: https://img.shields.io/pypi/v/enviroplus.svg
+ :target: https://pypi.python.org/pypi/enviroplus
+.. |Python Versions| image:: https://img.shields.io/pypi/pyversions/enviroplus.svg
+ :target: https://pypi.python.org/pypi/enviroplus
+
+0.0.2
+-----
+
+* Add support for extra ADC channel in Gas
+* Handle breaking change in new ltr559 library
+* Add Noise functionality
+
+0.0.1
+-----
+
+* Initial Release