| | 1 | Enviro+ |
| | 2 | ======= |
| | 3 | |
| | 4 | Designed for environmental monitoring, Enviro+ lets you measure air |
| | 5 | quality (pollutant gases and particulates), temperature, pressure, |
| | 6 | humidity, light, and noise level. Learn more - |
| | 7 | https://shop.pimoroni.com/products/enviro-plus |
| | 8 | |
| | 9 | |Build Status| |Coverage Status| |PyPi Package| |Python Versions| |
| | 10 | |
| | 11 | Installing |
| | 12 | ========== |
| | 13 | |
| | 14 | You're best using the "One-line" install method if you want all of the |
| | 15 | UART serial configuration for the PMS5003 particulate matter sensor to |
| | 16 | run automatically. |
| | 17 | |
| | 18 | One-line (Installs from GitHub) |
| | 19 | ------------------------------- |
| | 20 | |
| | 21 | :: |
| | 22 | |
| | 23 | curl -sSL https://get.pimoroni.com/enviroplus | bash |
| | 24 | |
| | 25 | **Note** report issues with one-line installer here: |
| | 26 | https://github.com/pimoroni/get |
| | 27 | |
| | 28 | Or... Install and configure dependencies from GitHub: |
| | 29 | ----------------------------------------------------- |
| | 30 | |
| | 31 | - ``git clone https://github.com/pimoroni/enviroplus-python`` |
| | 32 | - ``cd enviroplus-python`` |
| | 33 | - ``sudo ./install.sh`` |
| | 34 | |
| | 35 | **Note** Raspbian Lite users may first need to install git: |
| | 36 | ``sudo apt install git`` |
| | 37 | |
| | 38 | Or... Install from PyPi and configure manually: |
| | 39 | ----------------------------------------------- |
| | 40 | |
| | 41 | - Run ``sudo pip install enviroplus`` |
| | 42 | |
| | 43 | **Note** this wont perform any of the required configuration changes on |
| | 44 | your Pi, you may additionally need to: |
| | 45 | |
| | 46 | - Enable i2c: ``raspi-config nonint do_i2c 0`` |
| | 47 | - Enable SPI: ``raspi-config nonint do_spi 0`` |
| | 48 | |
| | 49 | And if you're using a PMS5003 sensor you will need to: |
| | 50 | |
| | 51 | - Enable serial: |
| | 52 | ``raspi-config nonint set_config_var enable_uart 1 /boot/config.txt`` |
| | 53 | - Disable serial terminal: ``sudo raspi-config nonint do_serial 1`` |
| | 54 | - Add ``dtoverlay=pi3-miniuart-bt`` to your ``/boot/config.txt`` |
| | 55 | |
| | 56 | And install additional dependencies: |
| | 57 | |
| | 58 | :: |
| | 59 | |
| | 60 | sudo apt install python-numpy python-smbus python-pil python-setuptools |
| | 61 | |
| | 62 | Help & Support |
| | 63 | -------------- |
| | 64 | |
| | 65 | - GPIO Pinout - https://pinout.xyz/pinout/enviro\_plus |
| | 66 | - Support forums - http://forums.pimoroni.com/c/support |
| | 67 | - Discord - https://discord.gg/hr93ByC |
| | 68 | |
| | 69 | .. |Build Status| image:: https://travis-ci.com/pimoroni/enviroplus-python.svg?branch=master |
| | 70 | :target: https://travis-ci.com/pimoroni/enviroplus-python |
| | 71 | .. |Coverage Status| image:: https://coveralls.io/repos/github/pimoroni/enviroplus-python/badge.svg?branch=master |
| | 72 | :target: https://coveralls.io/github/pimoroni/enviroplus-python?branch=master |
| | 73 | .. |PyPi Package| image:: https://img.shields.io/pypi/v/enviroplus.svg |
| | 74 | :target: https://pypi.python.org/pypi/enviroplus |
| | 75 | .. |Python Versions| image:: https://img.shields.io/pypi/pyversions/enviroplus.svg |
| | 76 | :target: https://pypi.python.org/pypi/enviroplus |
| | 77 | |
| | 78 | 0.0.3 |
| | 79 | ----- |
| | 80 | |
| | 81 | * Fix "self.noise_floor" bug in get_noise_profile |
| | 82 | |
| | 83 | 0.0.2 |
| | 84 | ----- |
| | 85 | |
| | 86 | * Add support for extra ADC channel in Gas |
| | 87 | * Handle breaking change in new ltr559 library |
| | 88 | * Add Noise functionality |
| | 89 | |
| | 90 | 0.0.1 |
| | 91 | ----- |
| | 92 | |
| | 93 | * Initial Release |
projects / EVA-2020-02-2.git / blame_incremental